prof. dr. norhamidi bin muhamad

pensyarah universiti

pusat kejuruteraan bahan & pembuatan pintar (mercu)

 norhamidi@ukm.edu.my

No. sambungan :  8372

No. rasmi:
UKM : 03 8921 5555
HUKM : 03-9145 6074/6075/6931/7748



   Biografi :
  • pensyarah universiti

  • Fauzi Ismail, Norhamidi Muhamad, Mat Husin Salleh.  (2001).  Morphology and particle size distribution of atomised Al 6061 powder.  - Proceedings of the 10th Scientific Conference on Electron Microscopy Society of Malaysia, 8-10 Nov 2001, Kuala Lumpur Malaysia. 

     

    Murtadhahadi, N. Muhamad dan C.H.C. Haron.  (2005).  Parameter penyuntikan bagi proses pengacuan suntikan logam (MIM) bagi bahan suapan daripada SS316 L, PEG, PMMA dan asid stearik.  - Proceedings of the National Seminar on Advanced Processes and Systems in Manufacturing (APSIM) 2005. 

     

    Lee Chang Chuan, Norhamidi Muhamad & Jaafar Sahari.  (2005).  Development and Processing of Titanium Foam for PEM Fuel Cell Bipolar Plate.  - Proceedings of Advanced Processes and Syatems in Manufacturing (APSIM 2005), Bangi, Malaysia,. 

     

    Tan Koon Tatt, Norhamidi Muhamad & Che Hassan Che Haron.  (2006).  Optimization of the Molding Parameters of Metal Injection Molding Process Using Taguchi Method.  - Seminar Penyelidikan Siswazah 2006. 

     

    Yovial Mahyoedin, Jaafar Sahari, Andanastuti Muchtar & Norhamidi Muhamad.  (2006).  Injection Molding of Bipolar Plate: Rheological Study.  - Seminar Penyelidikan Siswazah 2006 (SPS2006). 

     

    H. Abolhasani, N. Muhamad.  (2010).  A new starch-based binder for metal injection molding.  - Journal of Materials Processing Technology.  210(6-7):961-968. 

     

    Faizal Mustapha, Mazli Mustapha, Kartini Noorsal, Othman Mamat, Patthi Hussain, Faiz Ahmad, Norhamidi Muhamad, Sallehuddin Mohamed Haris.  (2010).  Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process.  - Journal of Materials Processing Technology.  210(12):1598-1612. 

     

    M.A. Mussa, S. Abdullah, C.S. Nor Azwadi, N. Muhamad.  (2011).  Simulation of natural convection heat transfer in an enclosure by the lattice-Boltzmann method.  - Computers & Fluids.  44(1):162-168. 

     

    Ahmed Y. Musa, N. Muhamad, Lim Tien Tien, Eng Pei Chee.  (2011).  Synergistic Effect of Iodide Ion and 1-(2H)-Phthalazinone on Galvanic Corrosion of Aluminum and Mild Steel in 1.0 M HCl.  - International Journal of Electrochemical Science.  6:5298-5304. 

     

    Hamimah Abdul Rahman, Andanastuti Muchtar, Norhamidi Muhamad, Huda Abdullah.  (2012).  Structure and thermal properties of La0.6Sr0.4Co0.2Fe0.8O3d-SDC carbonate composite cathodes for intermediate- to low-temperature solid oxide fuel cells.  - Ceramics International.  38: 1571-1576. 

     

    Ahmad, S; Muhamad, N; Muchtar, A; Sahari, J; Jamaludin, KR; Ibrahim, MHI; Nor, NHM; Murtadhahadi.  (2010).  Characterisation of Titanium Foams Sintered at Different Temperatures Prepared by the Slurry Method.  - Sains Malaysiana.  39(1):77-82. 

     

    A.Y. Musa, A. A. H. Kadhum, M. S. Takriff, A. R. Daud, S. K. Kamarudin and N. Muhamad.  (2010).  Corrosion inhibitive property of 4-amino-5-phenyl-4H-1,2,4-triazole-3-thiol for mild steel corrosion in 1.0M hydrochloric acid.  - Corrosion Engineering, Science and Technology.  45(2):163-168. 

     

    Mohd H.I. Ibrahim, Norhamidi Muhamad, Abu B. Sulong, Khairur R. Jamaludin, Nor H.M. Nor and Sufizar Ahmad.  (2011).  Optimization of micro metal injection molding with multiple performance characteristics using grey relational grade.  - Chiang Mai Journal of Science.  38(2):231-241. 

     

    Dedikarni Panuh, Andanastuti Muchtar*, Norhamidi Muhamad & Wan Ramli Wan Daud.  (2012).  Kesan rawatan haba terhadap mikrostruktur katod berliang Ag2O3-Bi2O3 di atas substrat keluli kalis karat yang disediakan dengan kaedah pengecatan sluri.  - Sains Malaysiana.  41(1): 121-127. 

     

    Javad Rajabi, Norhamidi Muhamad, Abu Bakar Sulong.  (2012).  Effect of nano-sized powders on powder injection molding: a review.  - Microsystem Technologies.  18(12):1941-1961. 

     

    Yuzainee Md Yusoff, Azami Zaharim, Mohd Zaidi Omar, Azah Mohamed, Norhamidi Muhamad, Ramlee Mustafa.  (2009).  Employers' Selection Skills in Recruiting Fresh Engineering Graduates.  - 2009 International Conference on Engineering Education (lCEED 2009), December 7-8, 2009, Kuala Lumpur, Malaysia. 

     

    Nor Hafiez Mohamad Nor, Norhamidi Muhamad, Sufizar Ahmad, Mohd Halim Irwan Ibrahim, Mohd Ruzi Harun and Khairur Rijal Jamaludin.  (2010).  Parameter Optimization of Injection Molding Ti-6Al-4V Powder and Palm Stearin Binder System for Highest Green Density Using Taguchi Method.  - Key Engineering Materials. 

     

    Andanastuti Muchtar, Noorashrina A. Hamid,
    Norhamidi Muhamad, Wan Ramli Wan Daud.  (2010).  Sintering Effects on LSCF Cathodes for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs).  - 2010 International Conference on Manufacturing Engineering and Automation, ICMEA2010; Guangzhou (Advanced Materials Research). 

     

    Hamimah Abd.Rahman, Andanastuti Muchtar, Norhamidi Muhamad, Huda Abdullah.  (2010).  Electrophoretic deposition of La0.6Sr0.4Co0.2Fe0.8O3-? cathode film on stainless steel substrates.  - 2010 International Conference on Manufacturing Engineering and Automation, ICMEA2010; Guangzhou(Advanced Materials Research). 

     

    Khairur Rijal Jamaludin, Norhamidi Muhamad, M.N.A. Rahman, S. Ahmad, M.H.I. Ibrahim, N.H.M.Nor and M.Y.M. Daud.  (2010).  Application of the Grey-Taguchi Method to the Optimization of Metal Injection Molding (MIM) Process.  - Key Engineering Materials. 

     

    Yuzainee Md Yusoff, Azami Zaharim, Mohd Zaidi Omar, Azah Mohamed, Norhamidi Muhamad, Ramlee Mustafa.  (2009).  Employers' Selection Skills in Recruiting Fresh Engineering Graduates.  - 2009 International Conference on Engineering Education (lCEED 2009), December 7-8, 2009, Kuala Lumpur, Malaysia. 

     

    Sufizar Ahmad, Norhamidi Muhamad, Andanastuti Muchtar, Jaafar Sahari, K. R. Jamaludin, M. H. I. Ibrahim and N.H. Mohamad Nor.  (2010).  Optimisation of processing parameters of titanium foams using Taguchi method for compressive strength.  - Key Engineering Materials (ICoPE2010 and 13th ICPE International Conference on Precision Engineering). 

     

    Khairur Rijal Jamaludin, Norhamidi Muhamad, M.N.A. Rahman, S. Ahmad, M.H.I. Ibrahim, N.H.M.Nor and M.Y.M. Daud.  (2010).  Application of the Grey-Taguchi Method to the Optimization of Metal Injection Molding (MIM) Process.  - Key Engineering Materials. 

     

    Mohd Halim Irwan Ibrahim, Norhamidi Muhamad, Abu Bakar Sulong, Khairur Rijal Jamaludin, Nor Hafiez Mohamad Nor, Sufizar Ahmad, Mohd Ruzi Harun and Hafizawati Zakaria.  (2010).  Parameter Optimization towards Highest Micro MIM Density by Using Taguchi Method.  - Key Engineering Materials. 

     

    Nor Hafiez Mohamad Nor, Norhamidi Muhamad, Sufizar Ahmad, Mohd Halim Irwan Ibrahim, Mohd Ruzi Harun and Khairur Rijal Jamaludin.  (2010).  Parameter Optimization of Injection Molding Ti-6Al-4V Powder and Palm Stearin Binder System for Highest Green Density Using Taguchi Method.  - Key Engineering Materials. 

     

    Y.M. Yusoff, M.Z. Omar, A. Zaharim, A. Mohamed, N. Muhamad, R. Mustapha.  (2011).  Computers And Simulation In Modern Science (Volume V).  - 3:12-17. 

     

    Ja`afar Sahari, Syazrin Aklili, Dzuraidah Abd Wahab, Ruhizan Mohd Yasin, Shahrum Abdullah, Ahmad Kamal Ariffin Mohd Ihsan, Shahrir Abdullah, Mohd Zaidi Omar, Norhamidi Muhamad.  (2012).  Mercu kesarjanaan pengajaran dan pembelajaran, penyelidikan tindakan di Institusi Pengajian Tinggi.  - 175-189. 

     

    Y.M. Yusoff, M.Z. Omar, A. Zaharim, A. Mohamed, N. Muhamad, R. Mustapha.  (2011).  Computers And Simulation In Modern Science (Volume V).  - 3:12-17. 

     

    Ja`afar Sahari, Syazrin Aklili, Dzuraidah Abd Wahab, Ruhizan Mohd Yasin, Shahrum Abdullah, Ahmad Kamal Ariffin Mohd Ihsan, Shahrir Abdullah, Mohd Zaidi Omar, Norhamidi Muhamad.  (2012).  Mercu kesarjanaan pengajaran dan pembelajaran, penyelidikan tindakan di Institusi Pengajian Tinggi.  - 175-189. 

     

    Yovial Mahyoedin, Jaafar Sahari, Andanastuti Muchtar & Norhamidi Muhamad.  (2006).  Injection Molding of Bipolar Plate: Rheological Study.  - Seminar Penyelidikan Siswazah 2006 (SPS2006). 

     

    Tan Koon Tatt, Norhamidi Muhamad & Che Hassan Che Haron.  (2006).  Optimization of the Molding Parameters of Metal Injection Molding Process Using Taguchi Method.  - Seminar Penyelidikan Siswazah 2006. 

     

    Tulus, Ariffin, A. K., Abdullah, S. & Muhamad.  (2006).  Finite element analysis for heat transfer in the insulator on piston pin of a linear generator engine.  - The 2nd IMT-GT Regional Conference On Mathematics, Statistics And Their Application (IRCMSA 2006). 

     

    Mohd Zulkefli Selamat, Jaafar Sahari, Norhamidi Muhamad & Andanastuti Muchtar.  (2007).  Effect of deformation on conductivity of graphite-based polyproplene composite.  - Seminar Penyelidikan Siswazah, 2007. 

     

    Shahrir Abdullah, Norhamidi Muhamad, Riza Atiq Abdullah O.K. Rahmat, Baba Md Deros, Noorhisham Tan Kofli , Mardina Abdullah.  (2007).  Penilaian objektif dan hasil program pendidikan berasaskan hasil (OBE): Soal selidik majikan industri dan alumni.  - Seminar Pendidikan Kejuruteraan dan Alam Bina (PeKA 2007).