Untuk Kegunaan UKM sahaja

For UKM use only

Curriculum Vitae


MAKLUMAT ASAS

PROF. IR. DR. ROZLI BIN ZULKIFLI

PENSYARAH UNIVERSITI
JABATAN KEJURUTERAAN MEKANIKAL & PEMBUATAN
rozlizulkifli@ukm.edu.my
No.rasmi UKM : 03 8921 5555
BIOGRAFI /BIOGRAPHY


KELAYAKAN AKADEMIK / ACADEMIC QUALIFICATION
(Bidang Pengajian),(Peringkat),(Institusi),(Tahun)
HEAT TRANSFER , Doktor Falsafah , UNIVERSITI KEBANGSAAN MALAYSIA , 2011
ADVANCED ENG MATERIALS , Sarjana , UNIVERSITY OF LIVERPOOL , 1996
MECH. ENG , Sarjana Muda , UNIVERSITY OF LIVERPOOL , 1994
KEPAKARAN / EXPERTISE
TECHNOLOGY AND ENGINEERING - MECHANICAL AND MANUFACTURING
TECHNOLOGY AND ENGINEERING - MECHANICAL AND MANUFACTURING
TECHNOLOGY AND ENGINEERING - ENERGY
TECHNOLOGY AND ENGINEERING - MATERIAL AND POLYMER
TECHNOLOGY AND ENGINEERING - MATERIAL AND POLYMER
PENERBITAN TERKINI / LATEST PUBLICATION

Penerbitan Berimpak Tinggi

Hind Azeez Mohammed Hussein, Rozli Zulkifli, Wan Mohd Faizal Bin Wan Mahmood, Raheem K. Ajeel.  (2023).  Numerical Investigation And Parameter Analysis Of Oblique-finned With Square Corrugations To Improve Heat Transfer Performance.  - Alexandria Engineering Journal.  669-688. 
Nur Syahirah M. Hanafi, Wan Aizon W. Ghopa, Rozli Zulkifli, Mohd Anas Mohd Sabri, Wan Fathul Hakim W. Zamri, Meor Iqram Meor Ahmad.  (2023).  Mathematical Formulation Of Al2o3-cu/water Hybrid Nanofluid Performance In Jet Impingement Cooling.  - Energy Reports.  435-466. 
Hind Azeez Mohammed Hussein, Rozli Zulkifli, Raheem K. Ajeel.  (2023).  An Oblique-fin With A Corrugated Profile: Thermohydraulic Performance And Heat Transfer Improvement With Development New Correlations.  - Journal Of Taibah University For Science.  1-21. 
Hind Azeez Mohammed Hussein, Rozli Zulkifli, Wan Mohd Faizal Wan Mahmood, Raheem K. Ajeel.  (2022).  Effects Of Design Parameters On Flow Fields And Heat Transfer Characteristics In Semicircle Oblique Finned Corrugated.  - International Communications In Heat And Mass Transfer.  1-20. 
Abeer Adel Salih, Rozli Zulkifli, Che Husna Azhari.  (2022).  Tensile Properties Of Single Cellulosic Bamboo Fiber (gigantochloa Scortechinii) Using Response Surface Methodology.  - Journal Of Natural Fibers.  359-368. 
Nur Syahirah M.hanafi, Wan Aizon W.ghopa, Rozli Zulkifli, Shahrir Abdullah, Zambri Harun, Mohd Radzi Abumansor.  (2022).  Numerical Simulation On The Effectiveness Of Hybrid Nanofluid In Jet Impingement Cooling Application.  - Energy Report.  764-775. 
Hind Azeez Mohammed Hussein, Rozli Zulkifli, Wan Mohd Faizal Bin Wan Mahmood, Raheem K. Ajeel.  (2022).  Structure Parameters And Designs And Their Impact On Performance Of Different Heat Exchangers: A Review.  - Renewable And Sustainable Energy Reviews.  1-21. 
Raheem K. Ajeel, Rozli Zulkifli, K. Sopian, Saba N. Fayyadh, Ahmad Fazlizan , Adnan Ibrahim.  (2021).  Numerical Investigation Of Binary Hybrid Nanofluid In New Configurations For Curved-corrugated Channel By Thermal-hydraulic Performance Method.  - Powder Technology.  144-159. 
Raheem K. Ajeel, K. Sopian, Rozli Zulkifli, Saba N. Fayyadh, Ali Kareem Hilo.  (2021).  Assessment And Analysis Of Binary Hybrid Nanofluid Impact On New Configurations For Curved-corrugated Channel.  - Advanced Powder Technology.  3869-3884. 
Raheem K. Ajeel, K. Sopian, Rozli Zulkifli.  (2021).  A Novel Curved-corrugated Channel Model: Thermal-hydraulic Performance And Design Parameters With Nanofluid.  - International Communications In Heat And Mass Transfer.  1-21. 
Raheem Kadhim Ajeel, K. Sopian, Rozli Zulkifli.  (2021).  Thermal-hydraulic Performance And Design Parameters In A Curved-corrugated Channel With L-shaped Baffles And Nanofluid.  - Journal Of Energy Storage.  1-24. 
Lindani Koketso Ncube, Albert Uchenna Ude, Enoch Nifise Ogunmuyiwa, Rozli Zulkifli, Isaac Nongwe Beas.  (2020).  Environmental Impact Of Food Packaging Materials: A Review Of Contemporary Development From Conventional Plastics To Polylactic Acid Based Materials.  - Materials.  1-24. 
Mohammad Yacoub Al Shdaifat, Rozli Zulkifli, Kamaruzzaman Sopian, Abeer Adel Salih.  (2020).  Thermal And Hydraulic Performance Of Cuo Water Nanofluids: A Review.  - Micromachines.  1-19. 
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa, Asmaa Soheil Najm, Noor Humam Sulaiman.  (2019).  Impact Of The Tio2 Nanosolution Concentration On Heat Transfer Enhancement Of The Twin Impingement Jet Of A Heated Aluminum Plate.  - Micromachines.  1-22. 
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa.  (2018).  Experimental And Numerical Simulation Of The Heat Transfer Enhancement On The Twin Impingement Jet Mechanism.  - Energies. 
Poorya Ooshaksaraei, Kamaruzzaman Sopian, Saleem H. Zaidi, Rozli Zulkifli.  (2017).  Performance Of Four Air Based Photovoltaic Thermal Collectors Configurations With Bifacial Solar Cells.  - Renewable Energy.  279-293. 
Poorya Ooshaksaraei, Kamaruzzaman Sopian, Saleem H. Zaidi, Rozli Zulkifli.  (2017).  Performance Of Four Air-based Photovoltaic Thermal Collectors Configurations With Bifacial Solar Cells.  - Renewable Energy.  279-293. 
Hyder H. Balla, Shahrir Abdullah, Wan Mahmood Wan Mohd Faizal, Rozli Zulkifli, Kamaruzaman Sopian.  (2015).  Enhancement Of Heat Transfer Coefficient Multi-metallic Nanofluid With Anfis Modeling For Thermophysical Properties.  - Thermal Science.  1613-1620. 
Eshkoor R.a., Ude A.u., Sulong A.b., Zulkifli R., Ariffin A.k., Azhari C.h..  (2015).  Energy Absorption And Load Carrying Capability Of Woven Natural Silk Epoxy - Triggered Composite Tubes.  - Composites Part B: Engineering.  10-18. 
Arifin A.m.t., Abdullah S., Rafiquzzaman M., Zulkifli R., Wahab D.a..  (2014).  Failure Characterisation In Polymer Matrix Composite For Un-notched And Notched (open-hole) Specimens Under Tension Condition.  - Fibers And Polymers.  1729 - 1738. 
A.u. Ude, R.a. Eshkoor, R. Zulkifili, A.k. Ariffin, A.w. Dzuraidah, C.h. Azhari.  (2014).  Bombyx Mori Silk Fibre And Its Composite: A Review Of Contemporary Developments.  - Materials And Design.  57(2014):298-305. 
R.a. Eshkoor, A.u. Ude, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari.  (2014).  Failure Mechanism Of Woven Natural Silk/epoxy Rectangular Composite Tubes Under Axial Quasi-static Crushing Test Using Trigger Mechanism.  - International Journal Of Impact Engineering.  53-61. 
Ali Ahmed Gitan,rozli Zulkifli,shahrir Abdullah,kamaruzzaman Sopian.  (2014).  Development Of Pulsating Twin Jets Mechanism For Mixing Flow Heat Transfer Analysis.  - The Scientific World Journal.  2014;1-8. 
A. M. T. Ariffin, S. Abdullah, Md. Rafiquzzaman, R. Zulkifli, D. A. Wahab & A. K. Ariffin.  (2014).  Investigation Of The Behaviour Of A Chopped Strand Mat/woven Roving/foam-klegecell Composite Lamination Structure During Charpy Testing.  - Materials And Design.  59:475-485. 
R.a. Eshkoor, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari.  (2013).  Effect Of Trigger Configuration On The Crashworthiness Characteristics Of Natural Silk Epoxy Composite Tubes.  - Composites Part B: Engineering.  55:5-10. 
R.a. Eshkoor, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari.  (2013).  Comparative Research On The Crashworthiness Characteristics Of Woven Natural Silk/epoxy Composite Tubes.  - Materials And Design.  47:248-257. 
P. Ooshaksaraei, K. Sopian, R. Zulkifli, And Saleem H. Zaidi.  (2013).  Characterization Of Air-based Photovoltaic Thermal Panels With Bifacial Solar Cells.  - International Journal Of Photoenergy.  2013:Article ID 978234. 
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Numerical Study Of The Enhancement Of Heat Transfer For Hybrid Cuo-cu Nanofluids Flowing In A Circular Pipe.  - Journal Of Oleo Science.  62(7):533-539. 

Penerbitan WOS

Mohammad Yacoub Al Shdaifat, Rozli Zulkifli, Kamaruzzaman Sopian, Abeer Adel Salih.  (2023).  Basics, Properties, And Thermal Issues Of Ev Battery And Battery Thermal Management Systems: Comprehensive Review.  - Proceedings Of The Institution Of Mechanical Engineers, Part D: Journal Of Automobile Engineering.  295-311. 
Mohammad Yacoub Al Shdaifat, Rozli Zulkifli, Kamaruzzaman Sopian, Abeer Adel Salih.  (2023).  Investigate The Effect Of A Novel Inlet Header On The Thermal And Hydraulic Performance Of A Liquid Cold Plate Used For Cooling The Li-ion Battery Cell Of Electric Vehicles.  - Proceedings Of The Institution Of Mechanical Engineers Part D - Journal Of Automobile Engineering.  3326-3333. 
Mahir Faris Abdullah, Rozli Zulkifli, Hazim Moria, Asmaa Soheil Najm, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa, Noor Humam Sulaiman.  (2021).  Assessment Of Tio2 Nanoconcentration And Twin Impingement Jet Of Heat Transfer Enhancement-a Statistical Approach Using Response Surface Methodology.  - Energies.  1-29. 
Abeer Adel Salih, Rozli Zulkifli, Che Husna Azhari.  (2020).  Optimization Of Bamboo Mesoparticle/nylon 6 Composite Mechanical Properties Using A Response Surface Methodology.  - International Journal Of Materials Research.  204-213. 
Razieh. K. Haddad, Rozli Zulkifli, Cristian Maluk And Zambri Harun.  (2020).  Experimental Investigation On The Influences Of Different Horizontal Fire Locations On Smoke Temperature Stratification Under Tunnel Ceiling.  - Journal Of Applied Fluid Mechanics.  1289-1298. 
Meor Syazalee, Rozli Zulkifli.  (2019).  Effect Of Humidity On The Mechanical Properties Of Kenaf Yarn Fibre Polylactic Acid Biocomposites.  - Jurnal Teknologi.  171-177. 
Abeer Adel Salih, Rozli Zulkifli, Che Husna Azhari.  (2019).  Mechanical And Morphological Properties Of Bamboo Mesoparticle Nylon 6 Composites.  - International Journal Of Materials Research.  130-136. 
Majid Jafarzadehghoushji, R. Alebrahim, Rozli Zulkifli, Abu Bakar Sulong, Shahrum Abdullah, Che Husna Azhari.  (2018).  Crashworthiness Characteristics Of Natural Ramie/bio-epoxy Composite Tubes For Energy Absorption Application.  - Iranian Polymer Journal. 
Nur Irmawati Om, Rozli Zulkifli, P. Gunnasegaran.  (2018).  Influence Of The Oblique Fin Arrangement On The Fluid Flow And Thermal Performance Of Liquid Cold Plate.  - Case Studies In Thermal Engineering. 
Majid J Ghoushji, Rahim A Eshkoor, Rozli Zulkifli, Abu B Sulong, Shahrum Abdullah And Che H Azhari.  (2017).  Energy Absorption Capability Of Axially Compressed Woven Natural Ramie/green Epoxy Square Composite Tubes.  - Journal Of Reinforced Plastics And Composites. 
Ghoushji, M.j., Eshkoor, R.a., Zulkifli, R., Sulong, A.b., Abdullah, S., Azhari, C.h..  (2017).  Energy Absorption Capability Of Axially Compressed Woven Natural Ramie/green Epoxy Square Composite Tubes.  - Journal Of Reinforced Plastics And Composites.  1028-1037. 
Mohd Azwan Husin, Rozli Zulkifli, Shahrum Abdullah And Wan Ramli Wan Daud.  (2016).  Mode Ii Delamination Of Woven Mengkuang Fiber/woven Silk Laminated Hybrid Composites.  - Materials Testing.  374-380. 
L. H. Jawad, S. Abdullah, R. Zulkifli, W. M. F. W. Mahmood.  (2014).  Numerical Study On The Effect Of Interaction Vaned Diffuser With Impeller On The Performance Of A Modified Centrifugal Compressor.  - Journal Of Mechanics.  30(2): 113-122. 
Ooshaksaraei P., Aghili K., Sopian K., Zulkifli R., Zaidi S.h..  (2014).  Steady State Characterization Of Bifacial Solar Cells At Different Configurations Of Air-based Photovoltaic Thermal Solar Panels.  - Journal Of Renewable And Sustainable Energy. 
Md. Ayub, Mohammad Hosseini Fouladi, Masomeh Ghassem, Mohd Jailani Mohd Nor, Hamidreza Soheili Najafabadi, Nowshad Amin, Rozli Zulkifli.  (2014).  Analysis On Multiple Perforated Plate Sound Absorber Made Of Coir Fiber.  - International Journal Of Acoustics And Vibration.  203-211. 
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, M. Abdul Razzaq, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Modelling And Measuring The Thermal Conductivity Of Multi-metallic Zn/cu Nanofluid.  - Research On Chemical Intermediates.  39(6):2801-2815. 
Hyder H. Balla, Shahrir Abdullah, Emad A. Jaffar Al-mulla, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Effect Of Reynolds Number On Heat Transfer And Flow For Multi-oxide Nanofluids Using Numerical Simulation.  - Research On Chemical Intermediates.  39(5):2197-2210. 
Md. Ayub, Mohd Jailani Mohd Nor, Mohammad Hosseini Fouladi, Rozli Zulkifli And Nowshad Amin.  (2012).  A Practical Acoustical Absorption Analysis Of Coir Fiber Based On Rigid Frame Modeling.  - Acoustical Physics.  58(2);246-255. 
Zulkarnain; Zulkifli, R; Nor, Mjm.  (2011).  Effect Of Porous Layer Backing And Perforation Ratio Of Perforated Plate On Acoustic Characteristics Of Coconut Fibre As A Sound Absorbent.  - Sains Malaysiana.  40(6):623-629. 
Zulkarnain, Rozli Zulkifli & Mohd Jailani Mohd Nor.  (2011).  Kesan Lapisan Berliang Dan Nisbah Keluasan Plat Berlubang Terhadap Ciri Akustik Serabut Sabut Kelapa Sebagai Bahan Penyerap Bunyi.  - Sains Malaysiana.  40(6):623-629. 

Penerbitan SCOPUS/ERA

Rasha Abdulrazzak Jasim, Wajdi Qassim Hussen, Mahir Faris Abdullah, Rozli Zulkifli.  (2023).  Numerical Simulation Of Characterization Of Hydraulic Jump Over An Obstacle In An Open Channel Flow.  - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences.  1-15. 
Hind Azeez Mohammed Hussein, Rozli Zulkifli, Raheem K. Ajeel.  (2023).  An Oblique-fin With A Corrugated Profile: Thermohydraulic Performance And Heat Transfer Improvement With Development New Correlations.  - Journal Of Taibah University For Science.  1-21. 
Hind Azeez Mohammed Hussein, Rozli Zulkifli, Wan Mohd Faizal Bin Wan Mahmood, Raheem K. Ajeel.  (2023).  Numerical Investigation And Parameter Analysis Of Oblique-finned With Square Corrugations To Improve Heat Transfer Performance.  - Alexandria Engineering Journal.  669-688. 
Mohammad Yacoub Al Shdaifat, Rozli Zulkifli, Kamaruzzaman Sopian, Abeer Adel Salih.  (2023).  Basics, Properties, And Thermal Issues Of Ev Battery And Battery Thermal Management Systems: Comprehensive Review.  - Proceedings Of The Institution Of Mechanical Engineers, Part D: Journal Of Automobile Engineering.  295-311. 
Nur Syahirah M. Hanafi, Wan Aizon W. Ghopa, Rozli Zulkifli, Mohd Anas Mohd Sabri, Wan Fathul Hakim W. Zamri, Meor Iqram Meor Ahmad.  (2023).  Mathematical Formulation Of Al2o3-cu/water Hybrid Nanofluid Performance In Jet Impingement Cooling.  - Energy Reports.  435-466. 
Mohammad Yacoub Al Shdaifat, Rozli Zulkifli, Kamaruzzaman Sopian, Abeer Adel Salih.  (2023).  Numerical Simulation On Heat Transfer Performance Of A Liquid Cold Plate For Cooling Of The Electric Vehicle Battery.  - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences.  114-125. 
Mohammad Yacoub Al Shdaifat, Rozli Zulkifli, Kamaruzzaman Sopian, Abeer Adel Salih.  (2023).  Investigate The Effect Of A Novel Inlet Header On The Thermal And Hydraulic Performance Of A Liquid Cold Plate Used For Cooling The Li-ion Battery Cell Of Electric Vehicles.  - Proceedings Of The Institution Of Mechanical Engineers Part D - Journal Of Automobile Engineering.  3326-3333. 
Hind Azeez Mohammed Hussein, Rozli Zulkifli, Wan Mohd Faizal Wan Mahmood, Raheem K. Ajeel.  (2022).  Effects Of Design Parameters On Flow Fields And Heat Transfer Characteristics In Semicircle Oblique Finned Corrugated.  - International Communications In Heat And Mass Transfer.  1-20. 
Abeer Adel Salih, Rozli Zulkifli, Che Husna Azhari.  (2022).  Tensile Properties Of Single Cellulosic Bamboo Fiber (gigantochloa Scortechinii) Using Response Surface Methodology.  - Journal Of Natural Fibers.  359-368. 
Nur Syahirah M.hanafi, Wan Aizon W.ghopa, Rozli Zulkifli, Shahrir Abdullah, Zambri Harun, Mohd Radzi Abumansor.  (2022).  Numerical Simulation On The Effectiveness Of Hybrid Nanofluid In Jet Impingement Cooling Application.  - Energy Report.  764-775. 
Hind Azeez Mohammed Hussein, Rozli Zulkifli, Wan Mohd Faizal Bin Wan Mahmood, Raheem K. Ajeel.  (2022).  Structure Parameters And Designs And Their Impact On Performance Of Different Heat Exchangers: A Review.  - Renewable And Sustainable Energy Reviews.  1-21. 
Abdullh Mansur Aldosry, Rozli Zulkifli, Wan Aizon Wan Ghopa.  (2021).  Heat Transfer Enhancement Of Liquid Cooled Copper Plate With Oblique Fins For Electric Vehicles Battery Thermal Management.  - World Electric Vehicle Journal.  1-14. 
Mahir Faris Abdullah, Rozli Zulkifli, Hazim Moria, Asmaa Soheil Najm, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa, Noor Humam Sulaiman.  (2021).  Assessment Of Tio2 Nanoconcentration And Twin Impingement Jet Of Heat Transfer Enhancement-a Statistical Approach Using Response Surface Methodology.  - Energies.  1-29. 
Raheem K. Ajeel, K. Sopian, Rozli Zulkifli, Saba N. Fayyadh, Ali Kareem Hilo.  (2021).  Assessment And Analysis Of Binary Hybrid Nanofluid Impact On New Configurations For Curved-corrugated Channel.  - Advanced Powder Technology.  3869-3884. 
Lindani Koketso Ncube, Albert Uchenna Ude, Enoch Nifise Ogunmuyiwa, Rozli Zulkifli, Isaac Nongwe Beas.  (2021).  An Overview Of Plastic Waste Generation And Management In Food Packaging Industries.  - Recycling.  1-25. 
Raheem Kadhim Ajeel, K. Sopian, Rozli Zulkifli.  (2021).  Thermal-hydraulic Performance And Design Parameters In A Curved-corrugated Channel With L-shaped Baffles And Nanofluid.  - Journal Of Energy Storage.  1-24. 
Raheem K. Ajeel, Rozli Zulkifli, K. Sopian, Saba N. Fayyadh, Ahmad Fazlizan , Adnan Ibrahim.  (2021).  Numerical Investigation Of Binary Hybrid Nanofluid In New Configurations For Curved-corrugated Channel By Thermal-hydraulic Performance Method.  - Powder Technology.  144-159. 
Raheem K. Ajeel, K. Sopian, Rozli Zulkifli.  (2021).  A Novel Curved-corrugated Channel Model: Thermal-hydraulic Performance And Design Parameters With Nanofluid.  - International Communications In Heat And Mass Transfer.  1-21. 
Lindani Koketso Ncube, Albert Uchenna Ude, Enoch Nifise Ogunmuyiwa, Rozli Zulkifli, Isaac Nongwe Beas.  (2020).  Environmental Impact Of Food Packaging Materials: A Review Of Contemporary Development From Conventional Plastics To Polylactic Acid Based Materials.  - Materials.  1-24. 
Siti Atiqa Al Zahra Mat Darus, Mariyam Jameelah Ghazali, Che Husna Azhari, Rozli Zulkifli, Ahmad Adlie Shamsuri.  (2020).  Mechanical Properties Of Gigantochloa Scortechinii Bamboo Particle Reinforced Semirigid Polyvinyl Chloride Composites.  - Jurnal Teknologi.  15-22. 
Abeer Adel Salih, Rozli Zulkifli, Che Husna Azhari.  (2020).  Tensile Properties And Microstructure Of Single Cellulosic Bamboo Fiber Strips After Alkali Treatment.  - Fibers.  1-10. 
Mohammad Yacoub Al Shdaifat, Rozli Zulkifli, Kamaruzzaman Sopian, Abeer Adel Salih.  (2020).  Thermal And Hydraulic Performance Of Cuo Water Nanofluids: A Review.  - Micromachines.  1-19. 
Abeer Adel Salih, Rozli Zulkifli, Che Husna Azhari.  (2020).  Optimization Of Bamboo Mesoparticle/nylon 6 Composite Mechanical Properties Using A Response Surface Methodology.  - International Journal Of Materials Research.  204-213. 
Razieh. K. Haddad, Rozli Zulkifli, Cristian Maluk And Zambri Harun.  (2020).  Experimental Investigation On The Influences Of Different Horizontal Fire Locations On Smoke Temperature Stratification Under Tunnel Ceiling.  - Journal Of Applied Fluid Mechanics.  1289-1298. 
Abeer Adel Salih, Rozli Zulkifli, Che Husna Azhari.  (2019).  Mechanical And Morphological Properties Of Bamboo Mesoparticle Nylon 6 Composites.  - International Journal Of Materials Research.  130-136. 
Abeer Adel Salih, Rozli Zulkifli, Che Husna Azhari.  (2019).  Water Absorption Behaviour And Its Effect On The Mechanical Properties Of Gigantochloa Scortechinii (buluh Simantan).  - International Journal Of Microstructure And Materials Properties.  184-201. 
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa, Asmaa Soheil Najm, Noor Humam Sulaiman.  (2019).  Impact Of The Tio2 Nanosolution Concentration On Heat Transfer Enhancement Of The Twin Impingement Jet Of A Heated Aluminum Plate.  - Micromachines.  1-22. 
Meor Syazalee, Rozli Zulkifli.  (2019).  Effect Of Humidity On The Mechanical Properties Of Kenaf Yarn Fibre Polylactic Acid Biocomposites.  - Jurnal Teknologi.  171-177. 
Mahir Faris Abdullah, Humam Kareem, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon W. Ghopa.  (2019).  Heat Transfer And Flow Structure Of Multiple Jet Impingement Mechanisms On A Flat Plate For Turbulent Flow.  - International Journal Of Mechanical And Mechatronics Engineering.  141-160. 
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa, Ashraf Amer Abbas.  (2018).  Heat Transfer Augmentation Based On Twin Impingement Jet Mechanism.  - International Journal Of Engineering & Technology. 
Majid Jafarzadehghoushji, R. Alebrahim, Rozli Zulkifli, Abu Bakar Sulong, Shahrum Abdullah, Che Husna Azhari.  (2018).  Crashworthiness Characteristics Of Natural Ramie/bio-epoxy Composite Tubes For Energy Absorption Application.  - Iranian Polymer Journal. 
Eslam R. Lotfy, Wan Mohd. Faizal Wan Mahmood, Rozli Zulkifli Dan Zambri Harun.  (2018).  Cfd Simulation Of Automotive Pollutant Dispersion In High-rise Building Urban Environment Under Deeply Stable Atmospheric Condition.  - International Journal Of Engineering And Technology (uae). 
Nur Irmawati Om, Rozli Zulkifli, P. Gunnasegaran.  (2018).  Influence Of The Oblique Fin Arrangement On The Fluid Flow And Thermal Performance Of Liquid Cold Plate.  - Case Studies In Thermal Engineering. 
Nur Irmawati Om, Rozli Zulkifli, P. Gunnasegaran.  (2018).  The Influence Of Different Types Of Nanofluid On Thermal And Fluid Flow Performance Of Liquid Cold Plate.  - International Journal Of Engineering & Technology. 
Mohd Faizal Mat Tahir, Mohd Hasif Nawi, Rozli Zulkifli, Elwaleed Awen Khider, Siti Munirah Mat Yunoh.  (2018).  The Effect Of Thickness And Density On The Acoustics Properties Of Ceiba Pentandra Natural Fiber.  - Arpn Journal Of Engineering And Applied Sciences. 
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa.  (2018).  Experimental And Numerical Simulation Of The Heat Transfer Enhancement On The Twin Impingement Jet Mechanism.  - Energies. 
Rozli Zulkifli, Che Husna Azhari.  (2018).  Mode Ii Interlaminar Fracture Properties Of Treated Silk Fibre/epoxy Composites At Low And High Temperature Range.  - International Journal Of Engineering & Technology. 
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon W.ghopa.  (2017).  Studying Of Convective Heat Transfer Over An Aluminum Flat Plate Based On Twin Jets Impingement Mechanism For Different Reynolds Number.  - International Journal Of Mechanical & Mechatronics Engineering (ijmme) The International Journals Of Engineering And Sciences (ijens).  1-16. 
Poorya Ooshaksaraei, Kamaruzzaman Sopian, Saleem H. Zaidi, Rozli Zulkifli.  (2017).  Performance Of Four Air-based Photovoltaic Thermal Collectors Configurations With Bifacial Solar Cells.  - Renewable Energy.  279-293. 
Majid J Ghoushji, Rahim A Eshkoor, Rozli Zulkifli, Abu B Sulong, Shahrum Abdullah And Che H Azhari.  (2017).  Energy Absorption Capability Of Axially Compressed Woven Natural Ramie/green Epoxy Square Composite Tubes.  - Journal Of Reinforced Plastics And Composites. 
Poorya Ooshaksaraei, Kamaruzzaman Sopian, Saleem H. Zaidi, Rozli Zulkifli.  (2017).  Performance Of Four Air Based Photovoltaic Thermal Collectors Configurations With Bifacial Solar Cells.  - Renewable Energy.  279-293. 
Faraziah Hassan, Rozli Zulkifli, Mariyam Jameelah Ghazali, Che Husna Azhari.  (2017).  Kenaf Fiber Composite In Automotive Industry: An Overview.  - International Journal On Advanced Science, Engineering And Information Technology.  315-321. 
Abdullah, M.f., Zulkifli, R., Harun, Z., Abdullah, S., Ghopa, W.a.w., Abbas, A.a..  (2017).  Experimental Investigation On Comparison Of Local Nusselt Number Using Twin Jet Impingement Mechanism.  - International Journal Of Mechanical And Mechatronics Engineering.  60-75. 
Ghoushji, M.j., Eshkoor, R.a., Zulkifli, R., Sulong, A.b., Abdullah, S., Azhari, C.h..  (2017).  Energy Absorption Capability Of Axially Compressed Woven Natural Ramie/green Epoxy Square Composite Tubes.  - Journal Of Reinforced Plastics And Composites.  1028-1037. 
Sim, J.s.t., Zulkifli, R., Abdullah, S., Harun, Z..  (2017).  Analysis Of Boost Conversion Process For A Thermoelectric Module.  - International Journal Of Advanced Mechatronic Systems.  144-150. 
Mohd Azwan Husin, Rozli Zulkifli, Shahrum Abdullah And Wan Ramli Wan Daud.  (2016).  Mode Ii Delamination Of Woven Mengkuang Fiber/woven Silk Laminated Hybrid Composites.  - Materials Testing.  374-380. 
Badrullzamin Mohd Yassin, Rozli Zulkifli, Wan Ramli Wan Daud, Shahrum Abdullah.  (2016).  Flexural Behaviour Of Uni-directional Kenaf Composites Using Experimental And Simulation Methods.  - International Journal Of Mechanical & Mechatronics Engineering.  57-64. 
Zaliha Wahid; Sallehuddin Mohamed Haris; Nizaroyani Saibani; Jaharah A. Ghani; Rozli Zulkifli; Mohd Radzi Abu Mansor.  (2016).  Examination Achievement Of Engineering Students From Ukm And Ude: A Comparison.  - Pertanika Journal Of Social Sciences And Humanities.  229-238. 
Zambri Harun, Wan Aizon W. Ghopa, Shahrir Abdullah, M. Izhar Ghazali, Ashraf Amer Abbas, Mohd Rasidi Rasani, Rozli Zulkifli, Wan Mohd Faizal Wan Mahmood, Mohd Radzi Abu Mansor, Zulkhairi Zainol Abidin.  (2016).  The Development Of A Multi Purpose Wind Tunnel.  - Jurnal Teknologi.  63-70. 
Mohd Azwan Husin, Rozli Zulkifli, Shahrum Abdullah, Wan Ramli Wan Daud.  (2016).  Kelakuan Delaminasi Komposit Laminat Hibrid Anyaman Gentian Mengkuang/ Gentian Alat Sutera/ Epoksi.  - Jurnal Teknologi.  67-74. 
Eshkoor R.a., Ude A.u., Sulong A.b., Zulkifli R., Ariffin A.k., Azhari C.h..  (2015).  Energy Absorption And Load Carrying Capability Of Woven Natural Silk Epoxy - Triggered Composite Tubes.  - Composites Part B: Engineering.  10-18. 
Hyder H. Balla, Shahrir Abdullah, Wan Mahmood Wan Mohd Faizal, Rozli Zulkifli, Kamaruzaman Sopian.  (2015).  Enhancement Of Heat Transfer Coefficient Multi-metallic Nanofluid With Anfis Modeling For Thermophysical Properties.  - Thermal Science.  1613-1620. 
Mohd Rashdan Awang, Rozli Zulkifli And Shahrir Abdullah.  (2015).  Minichannel Lcp For Ev Battery Cooling: Effect Of Fin Spacing.  - International Journal Of Mechanical & Mechatronics Engineering.  68-73. 
Jason Sim, Rozli Zulkifli, Shahrir Abdullah, Zambri Harun.  (2015).  Voltage Stabilization Of Thermoelectric Modules Using A Boost Converter.  - International Journal Of Mechanical & Mechatronics Engineering.  115-122. 
Mohd Azwan Husin, Rozli Zulkifli, Shahrum Abdullah, Wan Ramli Wan Daud.  (2015).  Effect Of Naoh Concentration On Mode Ii Critical Strain Energy Release, Giic For Woven Mengkuang Fibre Reinforced Epoxy Laminated Composites.  - International Journal Of Mechanical & Mechatronics Engineering.  26-31. 
Arifin A.m.t., Abdullah S., Rafiquzzaman M., Zulkifli R., Wahab D.a..  (2014).  Failure Characterisation In Polymer Matrix Composite For Un-notched And Notched (open-hole) Specimens Under Tension Condition.  - Fibers And Polymers.  1729 - 1738. 
Md. Ayub, Mohammad Hosseini Fouladi, Masomeh Ghassem, Mohd Jailani Mohd Nor, Hamidreza Soheili Najafabadi, Nowshad Amin, Rozli Zulkifli.  (2014).  Analysis On Multiple Perforated Plate Sound Absorber Made Of Coir Fiber.  - International Journal Of Acoustics And Vibration.  203-211. 
Ali Ahmed Gitan,rozli Zulkifli,shahrir Abdullah,kamaruzzaman Sopian.  (2014).  Development Of Pulsating Twin Jets Mechanism For Mixing Flow Heat Transfer Analysis.  - The Scientific World Journal.  2014;1-8. 
R.a. Eshkoor, A.u. Ude, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari.  (2014).  Failure Mechanism Of Woven Natural Silk/epoxy Rectangular Composite Tubes Under Axial Quasi-static Crushing Test Using Trigger Mechanism.  - International Journal Of Impact Engineering.  53-61. 
L. H. Jawad, S. Abdullah, R. Zulkifli, W. M. F. W. Mahmood.  (2014).  Numerical Study On The Effect Of Interaction Vaned Diffuser With Impeller On The Performance Of A Modified Centrifugal Compressor.  - Journal Of Mechanics.  30(2): 113-122. 
Ooshaksaraei P., Aghili K., Sopian K., Zulkifli R., Zaidi S.h..  (2014).  Steady State Characterization Of Bifacial Solar Cells At Different Configurations Of Air-based Photovoltaic Thermal Solar Panels.  - Journal Of Renewable And Sustainable Energy. 
A.u. Ude, R.a. Eshkoor, R. Zulkifili, A.k. Ariffin, A.w. Dzuraidah, C.h. Azhari.  (2014).  Bombyx Mori Silk Fibre And Its Composite: A Review Of Contemporary Developments.  - Materials And Design.  57(2014):298-305. 
A. M. T. Ariffin, S. Abdullah, Md. Rafiquzzaman, R. Zulkifli, D. A. Wahab & A. K. Ariffin.  (2014).  Investigation Of The Behaviour Of A Chopped Strand Mat/woven Roving/foam-klegecell Composite Lamination Structure During Charpy Testing.  - Materials And Design.  59:475-485. 
Zhi Li, Min You, Gang-yan Li, Jianping Wang And Rozli Zulkifli.  (2013).  Influencing Factors On Stress Distribution Of Weld Bonding Joint Under Bending Load.  - Journal Of Applied Sciences.  13(20):4153-4157. 
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Numerical Study Of The Enhancement Of Heat Transfer For Hybrid Cuo-cu Nanofluids Flowing In A Circular Pipe.  - Journal Of Oleo Science.  62(7):533-539. 
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, M. Abdul Razzaq, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Modelling And Measuring The Thermal Conductivity Of Multi-metallic Zn/cu Nanofluid.  - Research On Chemical Intermediates.  39(6):2801-2815. 
Layth H. Jawad, S. Abdullah, R. Zulkifli, And W.m.f.w. Mahmood.  (2013).  Numerical Investigation On The Effect Of Impeller Trimming On The Performance Of A Modified Compressor.  - Cfd Letters.  5(4):174-178. 
R.a. Eshkoor, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari.  (2013).  Effect Of Trigger Configuration On The Crashworthiness Characteristics Of Natural Silk Epoxy Composite Tubes.  - Composites Part B: Engineering.  55:5-10. 
Hyder H. Balla, Shahrir Abdullah, Emad A. Jaffar Al-mulla, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Effect Of Reynolds Number On Heat Transfer And Flow For Multi-oxide Nanofluids Using Numerical Simulation.  - Research On Chemical Intermediates.  39(5):2197-2210. 
R.a. Eshkoor, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari.  (2013).  Comparative Research On The Crashworthiness Characteristics Of Woven Natural Silk/epoxy Composite Tubes.  - Materials And Design.  47:248-257. 
P. Ooshaksaraei, K. Sopian, R. Zulkifli, And Saleem H. Zaidi.  (2013).  Characterization Of Air-based Photovoltaic Thermal Panels With Bifacial Solar Cells.  - International Journal Of Photoenergy.  2013:Article ID 978234. 
B. Daryakenari, S. Abdullah, R. Zulkifli, E. Sundararajan, A. B. Mohd Sood.  (2013).  Numerical Study Of Flow Over Ahmed Body And A Road Vehicle And The Change In Aerodynamic Characteristics Caused By Rear Spoiler.  - International Journal Of Fluid Mechanics Research.  40(4):354-372. 
Behrang Daryakenari, Shahrir Abdullah, Rozli Zulkifli.  (2013).  Reducing Vehicle Drag Force Through A Tapered Rear Side Wall.  - Sae International Journal Of Commercial Vehicles.  6(2):582-588. 
B. Daryakenari, S. Abdullah, R. Zulkifli, A. Shamsudeen.  (2012).  Numerical Study Of Multiple Channel Road Vehicle Underbody Diffusers.  - International Review Of Mechanical Engineering.  6(3):583-587. 
Layth H. Jawad, S. Abdullah, R. Zulkifli And W.m.f.w. Mahmood.  (2012).  Numerical Simulation Of Flow Inside A Modified Turbocharger Centrifugal Compressor.  - Asian Journal Of Applied Sciences.  5(8):563-572. 
M. F. Mat Tahir, M. Z. Nuawi, R. Zulkifli, S. Abdullah, M. A. Mohd Sabri.  (2012).  Study On Correlation Of Sound Absorption Coefficient For Automotive Noise Absorption Panel Material By Using Sabine Method And Z-octave Method.  - International Review Of Mechanical Engineering (ireme).  6(3):640-643. 
Jawad, L.h., Abdullah, S., Zulkifli, R., Mahmood, W.m.f.w..  (2012).  Prediction Of Centrifugal Compressor Performance By Using Adaptive Neuro-fuzzy Inference System (anfis).  - International Review On Modelling And Simulations.  5(4):1580-1587. 
Hyder H. Balla, Shahrir Abdullah, Rozli Zulkifli, Wan Mohd Faizal And Kamaruzzaman Sopian.  (2012).  Effect Of Oxides Nanoparticle Materials On The Pressure Loss And Heat Transfer Of Nanofluids In Circular Pipes.  - Journal Of Applied Sciences.  12(13):1396-1401. 
Jawad, L.h., Abdullah, S., Zulkifli, R., Mahmood, W.m.f.w..  (2012).  Modelling Of Centrifugal Compressor Impellers Using Adaptive Neuro- Fuzzy Inference Systems (anfis).  - International Review Of Mechanical Engineering.  6(5):1011-1017. 
Md. Ayub, Mohd Jailani Mohd Nor, Mohammad Hosseini Fouladi, Rozli Zulkifli And Nowshad Amin.  (2012).  A Practical Acoustical Absorption Analysis Of Coir Fiber Based On Rigid Frame Modeling.  - Acoustical Physics.  58(2);246-255. 
Rozli Zulkifli, Ali Ahmed Gitan, Kamaruzzaman Sopian, Shahrir Abdullah.  (2012).  Multiple Pulsating Jets Mechanism For Heat Transfer Enhancement.  - International Review Of Mechanical Engineering.  6(3):654-658. 
B. Daryakenari, S. Abdullah, R. Zulkifli, E. Sundararajan, A. B. Mohd Sood.  (2012).  Reducing The Aerodynamic Forces Through A Rear Spoiler.  - International Review On Modelling And Simulations.  5(6): 2512-2517. 
Ahmad Rasdan Ismail, Shashi Kumar S A Karagaratnan, Rozli Zulkifli, Baba Md Deros, Mohd Nizam Abdul Rahman.  (2012).  A Review On Thermal Comfort Assessment In Malaysian Industries.  - Jurnal Teknologi (sciences & Engineering).  59:7-11. 
Zulkarnain, Rozli Zulkifli & Mohd Jailani Mohd Nor.  (2011).  Kesan Lapisan Berliang Dan Nisbah Keluasan Plat Berlubang Terhadap Ciri Akustik Serabut Sabut Kelapa Sebagai Bahan Penyerap Bunyi.  - Sains Malaysiana.  40(6):623-629. 
Rozli Zulkifli, Mohd Faizal Mat Tahir, Mohd Jailani Mohd Nor & Ahmad Rasdan Ismail.  (2011).  Pekali Penyerapan Bunyi Dan Indek Kehilangan Penghantaran Panel Penyerap Bunyi Menggunakan Gentian Sabut Kelapa.  - Jurnal Teknologi.  54:13-24. 
M.a. Mussa, S. Abdullah, C.s. Nor Azwadi, R. Zulkifli.  (2011).  Lattice Boltzmann Simulation Of Cavity Flows At Various Reynolds Numbers.  - International Review On Modelling And Simulations.  4(4):1909-1919. 
Ahmad Rasdan Ismail, Norfadzilah Jusoh, Mohd. Nizam Ab. Rahman, Rozli Zulkifli And Kumaran Kardigama.  (2011).  Thermal Comfort Assessment At Parcel And Logistic Industry: A Field Study In Malaysia.  - The Institution Of Engineering Journal.  72(3):36-40. 
Zulkarnain; Zulkifli, R; Nor, Mjm.  (2011).  Effect Of Porous Layer Backing And Perforation Ratio Of Perforated Plate On Acoustic Characteristics Of Coconut Fibre As A Sound Absorbent.  - Sains Malaysiana.  40(6):623-629. 
M. Ayub, R. Zulkifli, M.h. Fouladi, N. Amin, M.j.m. Nor.  (2011).  A Study On The Acoustical Absorption Behavior Of Coir Fiber Using Miki Model.  - International Journal Of Mechanical And Materials Engineering.  6(3):343-349. 
Mohd Jailani Mohd Nor, Md. Ayub, Rozli Zulkifli, Nowshad Amin And Mohammad Hosseini Fouladi.  (2010).  Effect Of Compression On The Acoustic Absorption Of Coir Fiber.  - American Journal Of Applied Sciences.  7(9):1285-1290. 
M.z. Nuawi, Taib I. Mohamad, M. F. H. Hussin, S. Abdullah, R. Zulkifli, M.k. Zakaria.  (2010).  Preliminary Study Of Condition-based Monitoring (cbm) On Automotive Gearbox Using Ultrasonic Signals.  - World Applied Sciences Journal.  9(2):118-126. 
Zulkifli R., Zulkarnain, Nor M.j.m..  (2010).  Noise Control Using Coconut Coir Fiber Sound Absorber With Porous Layer Backing And Perforated Panel.  - American Journal Of Applied Sciences.  7(2):260-264. 
R.zulkiflili, C.h. Azhari.  (2010).  Interfacial Treatment Of Multi-layer Woven Silk/epoxy Composites.  - International Review Of Mechanical Engineering.  4(1):1-6. 
R. Zulkifli, K. Sopian, S. Abdullah, M. S. Takriff.  (2010).  Analysis Of Pulse Air Jet Flow Profiles.  - International Review Of Mechanical Engineering.  4(5):495-501. 
Mohd Jailani Mohd Nor, Md. Ayub, Rozli Zulkifli, Nowshad Amin And Mohammad Hosseini Fouladi.  (2010).  Effect Of Different Factors On The Acoustic Absorption Of Coir Fiber.  - Journal Of Applied Sciences.  10(22):2887-2892. 
Rozli Zulkifli, Zulkarnain, Mohd Jailani Mohd Nor.  (2010).  Noise Absorption Properties Of Coir Fiber With Porous Layer Facing.  - International Review Of Mechanical Engineering.  4(4):405-409. 
Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah And Mohd Sobri Takriff.  (2009).  Comparison Of Local Nusselt Number Between Steady And Pulsating Jet At Different Jet Reynolds Number.  - Wseas Transactions On Environment And Development.  5(5):384-393. 
Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah, Mohd Sobri Takriff.  (2009).  Comparison Of Local Nusselt Number For Steady And Pulsating Circular Jet At Reynolds Number Of 16000.  - European Journal Of Scientific Research.  29(3):369-378. 
Rozli Zulkifli, Mohd Jailani Mohd Nor, Ahmad Rasdan Ismail, Mohd Zaki Nuawi, Mohd Faizal Mat Tahir.  (2009).  Effect Of Perforated Size And Air Gap Thickness On Acoustic Properties Of Coir Fibre Sound Absorption Panels.  - European Journal Of Scientific Research.  28(2):242-252. 
A. R. Ismail. N. Jusoh, K. Sopian, I.m.s. Usman, R. Zulkifli, M.n.a. Rahman.  (2009).  Thermal Comfort Assessment: A Study At Malaysia Car Manufacturer.  - European Journal Of Scientific Research.  27(4):510-523. 
Rozli Zulkifli, Che Husna Azhari, Maryam J. Ghazali, Ahmad Rasdan Ismail, Abu Bakar Sulong.  (2009).  Interlaminar Fracture Toughness Of Multi-layer Woven Silk/epoxy Composites Treated With Coupling Agent.  - European Journal Of Scientific Research.  27(3):454-462. 
Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah, Mohd Sobri Takriff.  (2009).  Correlations Of Percentage Increases In Local Nusselt Number With Radial Distance For Steady And Pulsating Jet.  - International Review Of Mechanical Engineering.  3(5): 613-618. 
Omar N., Zulkifli R., Hassan R..  (2009).  Development Of A Virtual Laboratory For Radiation Heat Transfer.  - European Journal Of Scientific Research.  32(4):562-571. 
A.r. Ismail, M.l. Yeo, M.h.m. Haniff, R. Zulkifli, B.m. Deros, N.k. Makhtar.  (2009).  Assessment Of Postural Loading Among The Assembly Operators: A Case Study At Malaysian Automotive Industry.  - European Journal Of Scientific Research.  30(2):224-235. 
Ismail A.r., Hashim E., Ghani J.a., Zulkifli R., Kamilah N., Rahman M.n.a..  (2009).  Implementation Of Eis: A Study At Malaysian Smes.  - European Journal Of Scientific Research.  30(2):215-223. 
A. R. Ismail, Y. C. Soon, S. Abdullah, R. Zulkifli, K. Sopian, M.n.a. Rahman.  (2009).  Reverse Engineering In Fabrication Of Piston Crown.  - European Journal Of Scientific Research.  29(1):136-146. 
A.r. Ismail, R. Ismail, R. Zulkifli, N. K. Makhtar, B. M. Deros.  (2009).  A Study On Implementation Of Preventive Maintenance Programme At Malaysia Palm Oil Mill.  - European Journal Of Scientific Research.  29(1):126-135. 
A. R. Ismail, M.j.m.nor, M.r.a. Mansor, M.f.m.tahir, R.zulkifli.  (2009).  Environmental Noise Assessment And Modeling In Malaysia: A Comparative Monitoring Study.  - European Journal Of Scientific Research.  30(2):236-244. 
Zulkifli R..  (2009).  Surface Fracture Analysis Of Glass Fibre Reinforced Epoxy Composites Treated With Different Type Of Coupling Agent.  - European Journal Of Scientific Research.  29(1):55-65. 
A.r. Ismail, N. Jusoh, R. Zulkifli, K. Sopian And B.m. Deros.  (2009).  Thermal Comfort Assessment: A Case Study At Malaysian Automotive Industry.  - American Journal Of Applied Sciences.  6(8):1495-1501. 
Ismail A.r., Manap A.h.a.a., Wahab D.a., Zulkifli R., Makhtar N.k., Sopian K..  (2009).  Concurrent Engineering Approach In Designing Pressure Vessel.  - European Journal Of Scientific Research.  30(2):245-252. 
Zulkifli R., Nor M.j.m., Ismail A.r., Nuawi M.z., Abdullah S., Tahir M.f.m., Rahman M.n.a..  (2009).  Comparison Of Acoustic Properties Between Coir Fibre And Oil Palm Fibre.  - European Journal Of Scientific Research.  33(1):144-152. 
Abdullah S., Fahruddin A., Syarif J., Omar M.z., Zulkifli R..  (2009).  Fatigue Crack Growth Modelling Of Fibre Metal Laminate (fml) Composite.  - European Journal Of Scientific Research.  35(1):43-53. 
Sulong A.b., Azhari C.h., Zulkifli R., Othman M.r., Park J..  (2009).  A Comparison Of Defects Produced On Oxidation Of Carbon Nanotubes By Acid And Uv Ozone Treatment.  - European Journal Of Scientific Research.  33(2):295-304. 
Omar N., Ismail M.f., Zulkifli R., Hassan R..  (2009).  Development Of A Real-time Temperature And Voltage Monitoring System For Semiconductor Devices.  - European Journal Of Scientific Research.  34(2):168-177. 
A.r.ismail, M.r.a.mansor, M.j.m.nor, M.z.nuawi, R. Zulkifli, M. N. Ab. Rahman And K. Sopian.  (2008).  Comparative Studies And Impact Analysis Of Environmental Noise Modeling From Malaysian Industrial Projects.  - Wseas Transactions On Environment And Development.  4(8):666-675. 
R. Zulkifli, M.j. Mohd Nor, M.f. Mat Tahir, A.r. Ismail And M. Z. Nuawi.  (2008).  Acoustic Properties Of Multi-layer Coir Fibres Sound Absorption Panel.  - Journal Of Applied Sciences.  8(20):3709-3714. 
M. Z. Nuawi, S. Abdullah, A. R. Ismail, R. Zulkifli, M. K. Zakaria And M. F. H. Hussin.  (2008).  A Study On Ultrasonic Signals Processing Generated From Automobile Engine Block Using Statistical Analysis.  - Wseas Transactions On Signal Processing.  4(5):279-288. 
Rozli Zulkifli And Kamaruzzaman Sopian.  (2006).  Pulsating Circular Air Jet Impingement Heat Transfer.  - Journal Of Institution Of Engineers Malaysia.  67(3): 47-53. 

Prosiding Terindeks

Mahir Faris Abdullah, Humam Kareem Jalghaf, Rozli Zulkifli.  (2023).  A Critical Review Of Multiple Impingement Jet Mechanisms For Flow Characteristics And Heat Transfer Augmentation.  - 4th International Conference On Vehicle And Automotive Engineering, Vae 2022.  374-393. 
Phua Hoei Chuan, Mohd Faizal Bin Mat Tahir, Rozli Zulkifli, Meor Iqram Meor Ahmad.  (2022).  The Simulation Study On Acoustics Characteristics For Selected Local Wood Used In Malay Traditional House.  - Proceedings Of Mechanical Engineering Research Day 2022.  244-245. 
Zambri Harun, Eslam Reda Dan Rozli Zulki.  (2017).  Buoyancy Effect On Atmospheric Surface Layer: Measurements From The East Coast Of Malaysia.  - Fifteenth Asian Congress Of Fluid Mechanics (15acfm).  1-7. 
Zambri Harun, Muhammad Syafiq, Mohd Rasidi Rasani, Shahrum Abdullah, Rozli Zulkifli, Wan Mohd Faizal Wan Mahmood, Mariyam Jameelah Ghazali, Che Husna Azhari, Mohd Radzi Abu Mansor, Zulkhairi, Ashraf.  (2014).  Skin Friction Coefficient And Boundary Layer Trend On Ukm Aster I-bond.  - Applied Mechanics And Materials.  450-455. 
N.s.s. Selamat, Mohd Faizal Mat Tahir, Rozli Zulkifli, Mohd Jailani Mohd Nor, Mohd Anas Mohd Sabri, A.k. Elwaleed, M.y. Siti-munirah.  (2014).  Development Of Semi-active Panel Design For Sound Absorption.  - Applied Mechanics And Materials.  421-425. 
Jason Sim, Rozli Zulkifli And Shahrir Abdullah.  (2014).  Conceptual Thermosyphonic Loop Cooled Thermoelectric Power Cogeneration System For Automotive Applications.  - Applied Mechanics And Materials.  294-298. 
Ali Ahmed Gitan, Rozli Zulkifli, Kamaruzaman Sopian, Shahrir Abdullah.  (2014).  Twin Pulsating Jets Impingement Heat Transfer For Fuel Preheating In Automotives.  - Applied Mechanics And Materials.  322-328. 
Jason S.t. Sim, Rozli Zulkifli, M.f.mat Tahir, A.k. Elwaleed.  (2014).  Recycled Paper Fibres As Sound Absorbing Material.  - Applied Mechanics And Materials.  459-463. 
Elwaleed Awad Khidir , Nik Abdullah Nik Mohamed, Mohd Jailani Mohd Nor, Mohd Faizal Mat Tahir, Rozli Zulkifli.  (2014).  A Preliminary Study On The Sound Absorption Of Date Palm Fibers.  - Applied Mechanics And Materials.  406-410. 
Elwaleed Awad Khidir, Mojahed Osman Mohammed Ali, Mohammed Mustafa Ali, Mohd Faizal Bin Mat Tahir, Rozli Zulkifli.  (2014).  Analysis Of Sound Absorption Of Date Palm Fibers Based On Flow Resistivity.  - Applied Mechanics And Materials - 4th International Conference On Noise, Vibration And Comfort (nvc 2012).  285-290. 
Elwaleed Awad Khidir, Nik Abdullah Nik Mohamed, Mohd Jailani Mohd Nor, Mohd Faizal Mat Tahir, Rozli Zulkifli, Mohd Zaki Nuawi.  (2014).  Effect Of Density On The Sound Absorption Of Date Palm Fibers.  - Applied Mechanics And Materials.  437-441. 
Elwaleed Awad Khidir, Nik Abdullah Nik Mohamed, Mohd Jailani Mohd Nor, Mohd Faizal Mat Tahir, Rozli Zulkifli.  (2013).  Experimental Investigation Of Sound Absorption Properties Of Perforated Date Palm Fibers Panel.  - Iop Conference Series: Materials Science And Engineering (moime 2013). 
K. Sopian, P. Ooshaksaraei, A. Fudholi, R. Zulkifli, S.h. Zaidi, Hussein A. Kazeem.  (2013).  Performance Characterization Of Single Path And Double Path Air Based Bifacial Photovoltaic Thermal Solar Collector.  - Recent Advances In Energy, Environment And Geology : 2nd International Conference On Energy Systems, Environment, Entrepreneurship And Innovation (iceseei `13). 
Lukeman Yusoff, Lim Fang Yau, Shahrir Abdullah, Rozli Zulkifli, Azhari Shamsudeen And Mohammad Khatim Hasan.  (2012).  Underhood Fluid Flow And Thermal Analysis For Passenger Vehicle.  - Regional Conference On Automotive Research, Recar 2011;kuala Lumpur (applied Mechanics And Materials). 
Wan Mohd Faizal W.m., Mohd Anas M.s., Mohd Faizal M.t., Azli A., Rozli Z., Nordin J., Sallehuddin M.h., Rizauddin R., Shahrum A., Shahrir A. And Azhari S..  (2012).  Car Body And Chassis Development Of Ukm Carevo For Perodua Eco-challenge 2011.  - Regional Conference On Automotive Research, Recar 2011;kuala Lumpur (applied Mechanics And Materials). 
Muhammd Nubli Zulkifli, Azman Jalar, Shahrum Abdullah, Roslinda Shamsudin And Rozli Zulkifli.  (2012).  Hardness Variation Of Ball Bond Wire Bonding.  - Advanced Materials Research. 
Nazlia Omar,syahidah Sufi Haris, Rosilah Hassan, Haslina Arshad, Masura Rahmat, Noor Faridatul Ainun Zainal & Rozli Zulkifli.  (2012).  Automated Analysis Of Exam Questions According To Bloom`s Taxonomy.  - Procedia Social And Behavioral Sciences - Ukm Teaching And Learning Congress 2011. 
Eshkour, Ra; Ariffin, Ak; Zulkifli, R; Sulong, Ab; Azhari, Ch.  (2012).  The Failure Mode Of Natural Silk Epoxy Triggered Composite Tubes.  - 1st International Conference On Mechanical Engineering Research 2011 (icmer);kuantan ( Iop Conference Series-materials Science And Engineering). 
Zulkifli, R., Thye, T.k., Tahir, M.f.m., Ismail, A.r., Nor, M.j.m..  (2012).  Automotive Noise Insulation Composite Panel Using Natural Fibres With Different Perforation Areas.  - Regional Conference On Automotive Research, Recar 2011;kuala Lumpur (applied Mechanics And Materials). 
Rozli Zulkifli And Che Husna Azhari.  (2011).  Effect Of Silane Concentrations On Mode I Interlaminar Fracture Of Woven Silk/epoxy Composites.  - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen(advanced Materials Research). 
P. Ooshaksaraei, R. Zulkifli, S. H. Zaidi, M. Alghoul, A. Zaharim, K. Sopian.  (2011).  Terrestrial Applications Of Bifacial Photovoltaic Solar Panels.  - Proceedings Of The 10th Wseas International Conference On System Science And Simulation In Engineering (icossse `11),ukm. 
Rozli Zulkifli, Zulkarnain, Mohd Jailani Mohd Nor, Shahrum Abdullah.  (2011).  Perforated Plate Backing With Coconut Fiber As Sound Absorber For Low And Mid Range Frequencies.  - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010 (key Engineering Materials); Kuala Lumpur. 
Rozli Zulkifli And Che Husna Azhari.  (2010).  Interfacial Treatment Of Multi-layer Woven Silk Reinforced Epoxy Composites.  - Advanced Materials Research. 
Zulkifli R., Azhari C.h.
.  (2010).  Interfacial Treatment Of Multi-layer Woven Silk Reinforced Epoxy Composites.  - Advanced Materials Research. 

Buku Penyelidikan

Abeer Adel Al-nuaimi, Rozli Zulkifli, Che Husna Azhari.  (2021).  Natural Fibre Composites.  - 23. 
Rozli Zulkifli, A.u Ude & C.h Azhari.  (2017).  Advances In Material Processing & Integrity - Non Metals And Hybrids.  - 12. 
Che Husna Azhari, Abu Bakar Sulong & Rozli Zulkifli.  (2017).  Advances In Material Processing & Integrity - Non Metals And Hybrids.  - 215. 
Rozli Zulkifli And Che Husna Azhari.  (2014).  Advances In Materials Processing.  - 166-183. 
Rozli Zulkifli, Shahrum Abdullah, Sallehuddin Mohamed Haris, Zulkifli Mohd Nopiah, Zambri Harun, Mohd Radzi Abu Mansor Dan Nor Kamaliana Khamis.  (2014).  Automotive Engineering And Mobility Research.  - 714. 

Bab Dalam Buku

Helmi Norman, Ahmad Kamal Ariffin Mohd Ihsan, Azmin Sham Rambely, Rozli Zulkifli.  (2021).  Alternative Assessment In Higher Education: A Practical Guide To Assessing Learning.  - 11. 
Che Husna Azhari, Majid Ghoushji, Albert Uchenna Ude, Abdul Rahim Eshkoor & Rozli Zulkifli.  (2021).  Natural Fibre Composites.  - 13. 
Majid Ghoushji, Rozli Zulkifli, Che Husna Azhari.  (2021).  Natural Fibre Composites.  - 20. 
Abeer Adel Al-nuaimi, Rozli Zulkifli, Che Husna Azhari.  (2021).  Natural Fibre Composites.  - 23. 
Che Husna Azhari, Mohd Sapuan Salit, Rozli Zulkifli.  (2021).  Natural Fibre Composites.  - 9. 
Rozli Zulkifli, A.u Ude & C.h Azhari.  (2017).  Advances In Material Processing & Integrity - Non Metals And Hybrids.  - 12. 
Che Husna Azhari, Abu Bakar Sulong & Rozli Zulkifli.  (2017).  Advances In Materials Processing And Integrity Non-metals And Hybrids.  - 7. 
Rozli Zulkifli And Che Husna Azhari.  (2014).  Advances In Materials Processing.  - 166-183. 

Penulisan Dalam Bahasa Melayu

Che Husna Azhari, Mohd Sapuan Salit, Rozli Zulkifli.  (2021).  Natural Fibre Composites.  - 195. 
Che Husna Azhari, Abu Bakar Sulong & Rozli Zulkifli.  (2017).  Advances In Materials : Processing And Integrity Non Metals And Hybrids.  - 215. 
Che Husna Azhari, Abu Bakar Sulong & Rozli Zulkifli.  (2017).  Advances In Material Processing & Integrity - Non Metals And Hybrids.  - 215. 
Che Husna Azhari, Abu Bakar Sulong, Rozli Zulkifli.  (2017).  Advances In Materials Processing And Integrity Non Metals And Hybrids.  - 177. 
Rozli Zulkifli, Shahrum Abdullah, Sallehuddin Mohamed Haris, Zulkifli Mohd Nopiah, Zambri Harun, Mohd Radzi Abu Mansor Dan Nor Kamaliana Khamis.  (2014).  Automotive Engineering And Mobility Research.  - 714. 

Penerbitan Lain-lain

Rozli Bin Zulkifli;kamaruzzaman Bin Sopian;shahrir Bin Abdullah;zambri Bin Harun;wan Aizon Bin W Ghopa.  (2023).  Flow And Convective Heat Transfer Characteristics Of Oblique Fins Minichannel Nanoliquid Cold Plate In Laminar And Turbulence Flow Regime .  -
Nazlia Binti Omar;rozli Bin Zulkifli;sabrina Binti Tiun.  (2023).  Question Classification Based On Bloom’s Taxonomy Cognitive Domain Using Machine Learning Approach.  -
Mohd Faizal Bin Mat Tahir;rozli Bin Zulkifli;mohd. Zaki Bin Nuawi;nor Kamaliana Binti Khamis.  (2023).  Studies On Acoustics Properties Of Local Wood Material Use In Traditional Malaysian House.  -
Nur Syahirah Mohamad Hanafi , Wan Aizon W Ghopa , Rozli Zulkifli , Mohd Anas Mohd Sabri, Wan Fathul Hakim W Zamri And Meor Iqram Meor Ahmad.  (2023).  Numerical Investigation Of Hybrid Nanofluid Heat Transfer Performance In Jet Impingement Cooling.  - Tmrees23.  23. 
Phua Hoei Chuan, Mohd Faizal Mat Tahir, Rozli Zulkifli, Meor Iqram Meor Ahmad.  (2022).  The Simulation Study On Acoustics Characteristics For Selected Local Wood Used In Malay Traditional House.  - Mechanical Engineering Research Day 2022.  1. 
Rozli Bin Zulkifli;wan Fathul Hakim Bin W. Zamri;mohd Faizal Bin Mat Tahir;abdul Hadi Bin Azman.  (2021).  Surface Modification On The Mechanical And Thermal Properties Of Biodegradable Meso-structured Bamboo Fibre /polyamide 6 Composites .  -
Ahmad Kamal Ariffin, Azmin Sham Rambely, Rozli Zulkifli, Raihanah Mohd. Mydin, Muhammad Helmi Norman, Sufeera Rahmad, Muhammad Fahmi Mike Abdullah, Raja Norlilawati Raja Muda, Nur Fadzilla Yusoff.  (2020).  Laporan Pelaksanaan Pembelajaran Aktif Ukm Sem 1 20192020.  - 1-85. 
Zainuddin Bin Sajuri;che Husna Bt. Azhari;andanastuti Muchtar;rozli Bin Zulkifli;mohd. Zaidi Bin Omar;shahrum Bin Abdullah;mariyam Jameelah Binti Ghazali;abu Bakar Bin Sulong;intan Fadhlina Binti Mohamed.  (2020).  Development Of Light Weight Materials For Ballistic Applications In Tropical Climates.  -
Shahrir Bin Abdullah;yusoff Bin Ali;rozli Bin Zulkifli;taib Iskandar Bin Mohamad;azli Bin Arifin;elankovan A/l A Sundararajan;mohammad Khatim Bin Hasan;mariyam Jameelah Binti Ghazali;azhari Bin Shamsudeen.  (2019).  Computationally Optimised Fuel-efficient Concept Car.  - 1-8. 
Mohd Zaidi Omar, Rozli Zulkifli, Rosdiadee Nordin, Zulkifli Mohd Nopiah, Mohd Farid Mohamed, Suraya Shahril, Wan Nor Roslam Wan Isahak, Azhari Shamsudeen, Mohd Huzairi Johari, Muhamad Fadle Mohamad Abu Sadin & Siti Hajar Mohammad.  (2017).  Research Bulletin Innovate-engineering And Built Environment (vol 10).  - 1-144. 
Mohd Zaidi Omar, Rozli Zulkifli, Rosdiadee Nordin, Zulkifli Mohd Nopiah, Mohd Farid Mohamed, Suraya Shahril, Wan Nor Roslam Wan Isahak, Roslena Md Zaini, Azhari Shamsudeen, Mohd Huzairi Johari & Siti Hajar Mohammad.  (2016).  Research Bulletin Innovate-engineering And Built Environment.  -
Mohd Zaidi Omar, Rozli Zulkifli, Rosdiadee Nordin, Zulkifli Mohd Nopiah, Mohd Farid Mohamed, Suraya Shahril, Wan Nor Roslam Wan Isahak, Roslena Binti Md Zaini, Azhari Shamsudeen, Mohd Huzairi Johari, Siti Hajar Mohammad.  (2016).  Research Bulletin (engineering & Built Environment).  - 1-122. 
Zambri Harun, W. A. W. Ghopa, S. Abdullah, M. Izhar Ghazali, Ashraf A. Abbas, M. R Rasani, Rozli Zulkifli, W. M F. Wan Mahmood, M R Abu Mansor, Z. Z. Abidin And Wan Hanna Melini Wan Mohtar.  (2015).  The Development Of A Multi-purpose Wind Tunnel.  - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2015). 
Mohd Marzuki Mustafa, Salina Abdul Samad, Abdul Wahab Mohammad, Azami Zaharim, Amiruddin Ismail, Rozli Zulkifli, Roslena Md Zaini, Azhari Bin Shamsudeen, Mohd Huzairi Bin Johari, Sharifah Noor Munirah.  (2013).  Laporan Tahunan Pusat Kecemerlangan Fkab 2013.  - Laporan Tahunan. 
Layth H. Jawad, Shahrir Abdullah, Rozli Zulkifli And Wan Mohd F. Wan Mahmood.  (2012).  Numerical Simulation Of Flow Inside A Vaned Diffuser Of A Modified Centrifugal Compressor.  - 18th Australasian Fluid Mechanics Conference (afmc). 
B. Daryakenari, S. Abdullah, R. Zulkifli, E. Sundararajan.  (2011).  Numerical Study Of Multiple Channel Road Vehicle Underbody Diffusers.  - Regional Conference On Automotive Research 2011. 
Md. Ayub, Mohd Jailani Mohd Nor, Rozli Zulkifli, Mohammad Hosseini Fouladi And Nowshad Amin.  (2011).  Effect Of Porosity On The Use Of Multiple Perforated Plates With Coir Fiber Acoustic Absorber.  - 18th International Congress On Sound And Vibration (icsv18). 
Lukeman Yusoff, Lim Fang Yau, Shahrir Abdullah, Rozli Zulkifli, Azhari Shamsudeen, Mohammad Katim Hassan.  (2011).  Underhood Fluid Flow And Thermal Analysis For Passenger Vehicle.  - Regional Conference On Automotive Research (recar) 2011. 
R A Eshkour, A K Ariffin, R Zulkifli, A B Sulong And C H Azhari.  (2011).  The Failure Mode Of Natural Silk Epoxy Triggered Composite Tubes.  - 1st International Conference In Mechanical Engineering Research (icmer) 2011. 
Ahmad Rasdan Ismail, Mohd Jailani Mohd Nor, Mohd Faizal Mat Tahir, H. Mohamad, R. A. Bakar,rozli Zulkifli.  (2010).  Environmental Noise Impact To Urban Area In Malaysia : A Case Study Due To Aircraft Noise.  - 3rd Regional Conference On Noise, Vibration And Comfort (nvc) 2010. 
B. Daryakenari, S. Abdullah, F.y. Lim, R. Zulkifli & E. Sundararajan.  (2010).  Effect Of Angular Rear Bumper On The Reduction Of Drag Coefficient On Ahmed Body.  - International Conference On Sustainable Mobility (icsm 2010), Kuala Lumpur. 
M. Ayub, M. J. M. Nor, N. Amin, M. Hosseini Fouladi, R. Zulkifli.  (2010).  Analytical Modeling Technique For The Prediction Of Coir Fiber Acoustical Behaviour.  - 3rd Regional Conference On Noise, Vibration And Comfort (nvc 2010). 
Rozli Zulkifli.  (2010).  Pulsating Jet Impingement Heat Transfer.  - Koleksi Laporan Penyelidikan Ukm. 
M. Ayub, Mohd Jailani Mohd Nor, Nowshad Amin, Rozli Zulkifli, Azli Arifin.  (2010).  Development Of An Automated Acoustic Absorber Panel Using Coir Fiber.  - The 3rd Regional Conference On Noise, Vibration And Comfort (nvc 2010). 
Zulkarnain, Rozli Zulkifli, Mohd Jailani Mohd Nor.  (2010).  Experimental Study Effect Of Perforation Ratio And Hole Diameter Of Perforated Plate Backing With Coconut Fiber.  - 3rd Regional Conference On Noise, Vibration And Comfort (nvc 2010). 
PROJEK PENYELIDIKAN / RESEARCH PROJECT
(Tajuk),(Peranan),(Tempoh),(Tahap)

Aktif

Heat Transfer Enhancement of Hybrid Two-phase Nanofluid Jet Impingement for High Heat Flux Cooling , Ketua Projek , 15-03-2024 sehingga 14-03-2025 , Universiti
Elucidation of the Characteristics of Heat Transfer of Pulsating Hybrid Nanofluids Jet for High Heat Flux Cooling in Confined Space , Ketua Projek , 01-10-2023 sehingga 30-09-2026 , Kebangsaan
QUESTION CLASSIFICATION BASED ON BLOOM’S TAXONOMY COGNITIVE DOMAIN USING DEEP LEARNING APPROACH , Penyelidik Bersama , 01-08-2023 sehingga 31-07-2024 , Universiti
Physical characteristics of vegetable plants in urban farming on their acoustics property attributes for nature sound wall application. , Penyelidik Bersama , 01-09-2022 sehingga 31-08-2024 , Kebangsaan
Elucidation of the characteristics of heat and mass transfer in square slots dehumidifier immersed in desiccant liquid for energy-efficient cooling , Penyelidik Bersama , 07-09-2021 sehingga 06-09-2024 , Kebangsaan

Tamat

Flow and Convective Heat Transfer Characteristics of Oblique Fins MiniChannel Nanoliquid Cold Plate in Laminar and Turbulence Flow Regime , Ketua Projek , 01-01-2019 sehingga 30-09-2022 , Kebangsaan
Surface Modification on the Mechanical and Thermal Properties of Biodegradable Meso-Structured Bamboo Fibre /Polyamide 6 Composites , Ketua Projek , 15-11-2018 sehingga 14-05-2021 , Kebangsaan
Sistem Kenderaan Lestari Berkecekapan Tenaga Optimum , Ketua Projek , 15-06-2015 sehingga 30-09-2016 , Universiti
Development of Natural Fibre/Furan Hybrid Green Composite Energy Absorption System for Automotive Applications , Ketua Projek , 01-12-2013 sehingga 30-11-2015 , Universiti
Heat Transfer in Hybrid Single-Phase Jet Impingement Micro-Channel for High Heat Flux Cooling , Ketua Projek , 01-04-2013 sehingga 31-03-2016 , Kebangsaan
High Efficiency Thermoelectric Generator Output through Heat Transfer Enhancement , Ketua Projek , 01-06-2012 sehingga 31-05-2014 , Kebangsaan
Fundamental Studies on Multiple Steady and Pulse Jet Impingement Heat Transfer , Ketua Projek , 06-06-2011 sehingga 05-06-2013 , Kebangsaan
Heat Transfer and Fluid Flow Characteristics of Self-Rotating Cylinder For High-Frequency Pulsed Jet Impingement , Ketua Projek , 01-10-2007 sehingga 30-06-2011 , Universiti
Development of high performance composite noise barrier panels from local natural fibre materials , Ketua Projek , 01-08-2007 sehingga 30-09-2009 , Kebangsaan
Development Of Advanced Pulse Jet Heating System For Aerospace Applications , Ketua Projek , 01-12-2006 sehingga 30-06-2009 , Kebangsaan
Hybrid Composites Joint as In Situ Strengthening Mechanism for Friction Stir Welding of Aluminium Alloys , Penyelidik Bersama , 01-09-2021 sehingga 31-08-2023 , Universiti
QUESTION CLASSIFICATION BASED ON BLOOM’S TAXONOMY COGNITIVE DOMAIN USING MACHINE LEARNING APPROACH , Penyelidik Bersama , 01-05-2021 sehingga 30-10-2022 , Universiti
Studies on Acoustics Properties of Local Wood Material Use in Traditional Malaysian House , Penyelidik Bersama , 01-10-2019 sehingga 30-09-2022 , Universiti
Mathematical Formulation for Analysing Hybrid Nanofluid Heat Transfer Performance in Jet Impingement , Penyelidik Bersama , 01-01-2019 sehingga 31-12-2022 , Kebangsaan
The Development of Urban Heat Island Mitigation Strategies , Penyelidik Bersama , 01-08-2016 sehingga 31-07-2019 , Kebangsaan
Development of Light Weight Materials for Ballistic Applications in Tropical Climates , Penyelidik Bersama , 01-01-2016 sehingga 30-06-2018 , Kebangsaan
Structure-Property Relationship, Processing and Performance of Advanced Materials , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti
Probabilistic and Non-Probabilistic Formulaltion of Fatigue Behaviour in Multiscale Structure , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti
Pembangunan model CDIO dalam cabaran automotif dan mengintegrasikan pendidikan STEM. , Penyelidik Bersama , 01-02-2015 sehingga 31-01-2017 , Antarabangsa
Pembangunan dan Kebolehlaksanaan Elemen Kompleksiti dalam Pengajaran dan Pembelajaran Kejuruteraan , Penyelidik Bersama , 01-08-2014 sehingga 31-07-2016 , Universiti
Structure-Property, Processing, Performance, Recycle and Reuse (RR) of Advanced Materials. , Penyelidik Bersama , 01-08-2014 sehingga 31-07-2016 , Kebangsaan
Structure-Property Relationship, Processing and Performance of Advanced Materials , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti
Probabilistic and Non-Probabilistic Formulation of Fatigue Behaviour in Multiscale Structure , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti
Sistem Kenderaan lestari Berkecekapan Tenaga Optimum , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti
STRATIFIED CHARGE COMPRESSED NATURAL GAS DIRECT INJECTION WITH TURBOCHARGER FOR FUEL EFFICIENT ENGINE , Penyelidik Bersama , 01-08-2013 sehingga 30-04-2016 , Kebangsaan
CHEAPER AND MORE DURABLE PEMFC FOR FUEL CELL VEHICLE , Penyelidik Bersama , 01-07-2013 sehingga 31-12-2017 , Kebangsaan
THE EFFECTS OF SKYCRAPERS TO AIR FLOW STRUCTURES AND HEAT DISSIPATIONS , Penyelidik Bersama , 20-05-2013 sehingga 19-11-2016 , Kebangsaan
Vortex and drag control mechanism in turbulent flows using riblets , Penyelidik Bersama , 01-04-2013 sehingga 30-09-2016 , Kebangsaan
Numerical and Experimental Investigations on the Flow and Wall Deposition of Soot Particles in In-cylinder Turbulent Flow and the Boundary Layer , Penyelidik Bersama , 01-04-2013 sehingga 31-03-2016 , Kebangsaan
A Predictive Model for Evaluation of Strength in Bimodal Distributed Nanostructed Composites , Penyelidik Bersama , 01-04-2013 sehingga 31-03-2016 , Kebangsaan
PROBALISTIC AND NON-PROBALISTIC FORMULATION OF FATIGUE BEHAVIOUR IN MULTISCALE STRUCTURE , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti
STRUCTURE-PROPERTY RELATIONSHIP, PROCESSING AND PERFORMANCE OF ADVANCED MATERIALS , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti
SISTEM KENDERAAN BERKECEKAPAN BAHAN API OPTIMUM , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti
IMPLEMENTATION OF THE INTERNET BASED AS INNOVATION IN PROBLEM BASED LEARNING (PBL) METHODS FOR STATISTICAL. , Penyelidik Bersama , 22-11-2012 sehingga 22-11-2013 , Universiti
Development Of A Prototype Radioprotective Device To Minimize Radiation Dose During Computed Tomography , Penyelidik Bersama , 08-08-2011 sehingga 08-08-2013 , Universiti
Numerical and Experimental Investigations on the Flow and Convective heat Transfer Characteristics of Biometallic nanofluids in Fully developed laminar Flow Regime , Penyelidik Bersama , 06-06-2011 sehingga 17-01-2014 , Kebangsaan
Pengecaman Kategori Asas Taksonomi Bloom di dalam Soalan peperiksaan melalui Kaedah pemprosesan bahasa tabii , Penyelidik Bersama , 01-04-2011 sehingga 30-09-2012 , Universiti
COMPUTATIONALLY OPTIMISED FUEL-EFFICIENT CONCEPT CAR , Penyelidik Bersama , 01-11-2009 sehingga 31-12-2014 , Kebangsaan
Novel Signal Analysis for Characterisation of Compressed Natural Gas (CNG) Injection System , Penyelidik Bersama , 01-11-2009 sehingga 30-04-2012 , Kebangsaan
Development of A Novel Method to Produce Polymer Fiber Using Electrospinning , Penyelidik Bersama , 01-11-2009 sehingga 30-04-2012 , Kebangsaan
ESTABLISHMENT OF OPTIMUM PERFORMANCE THROUGH BIOMECHANICS ENGINEERING ANALYSIS DURING IN-STEP KICKING FOR MALAYSIAN FOOTBALLER , Penyelidik Bersama , 01-12-2008 sehingga 31-05-2011 , Kebangsaan
STUDIES ON HYDROGEN-METHANE BLEND AS FUEL FOR EXTRA LOW-EMISSION SPARK IGNITION ENGINES , Penyelidik Bersama , 01-12-2008 sehingga 01-11-2010 , Kebangsaan
Optimisation of Vibro-Acoustics and Fuel Efficiency Performance of An Automotive System , Penyelidik Bersama , 01-06-2008 sehingga 31-05-2011 , Universiti
Artificial Indoor Garden with Hydronic Radiant Cooling System , Penyelidik Bersama , 01-05-2008 sehingga 30-10-2011 , Universiti
Design of CNG-DI Piston for Extreme Temperature and Pressure , Penyelidik Bersama , 01-10-2007 sehingga 30-06-2012 , Universiti
Development of a Pressure Differential Adaptive Valve Lift and Timing for a CNGDI Engine , Penyelidik Bersama , 01-10-2007 sehingga 30-06-2010 , Universiti
Development of microexchanger for liquid-based termal management in high-performance semiconductor package , Penyelidik Bersama , 01-08-2007 sehingga 30-11-2009 , Kebangsaan
Fabrication And Materials Performance Of Carbon And Natural Silk Laminate Composites For Light Weight Vehicles (Lwv) , Penyelidik Bersama , 01-12-2006 sehingga 01-04-2009 , Kebangsaan
Development Of Novel Dual-Phase Steel For Automotive Body Via Substitutional Solid-Solution Mechanism , Penyelidik Bersama , 01-12-2006 sehingga 31-01-2009 , Kebangsaan
Development Of High Frequency Vibro-Acoustic Sensor System For Automotive Engine Performance Monitoring , Penyelidik Bersama , 01-12-2006 sehingga 30-11-2008 , Kebangsaan
ANUGERAH DAN PENGURUSAN / AWARD AND STEWARDSHIP
(Nama Anugerah/Pentadbiran),(Institusi Penganugerahan),(Tahun)

Anugerah UKM

Anugerah Penyelidikan , 2012
Anugerah Perkhidmatan 20 Tahun / Anugerah Perkhidmatan 20 Tahun , 2015
Anugerah Perkhidmatan Cemerlang / Anugerah Perkhidmatan Cemerlang , 2016

Anugerah-anugerah Lain

MyRA - Anugerah Kecemerlangan MyRA Prestasi 2020 (Penyeliaan) - Sijil Penghargaan , 2022
Anugerah Kecemerlangan Dalam Perkhidmatan (Bahagian) , 2022
Pemenang Pertandingan Penjimatan Tenaga Elektrik dan Air, Daerah Sepang, Selangor , 2018
Karnival Inovasi Pengajaran & Pembelajaran (K-NOVASI) UKM , 2016
Anugerah Keterlibatan Industri , 2013
PENYELIAAN PELAJAR / SUPERVISION

Pelajar Sarjana

ZHANG XIANGYU, Sarjana
ZHAO JICHAO, Sarjana
Kesan Terhadap Parameter Muncung Pada Pemindahan haba Santakan Jet Dedenyut, HAFLIZA BINTI MOHD YUSOP, Sarjana
Kajian Penggunaan Gentian Sabut Kelapa Yang Dilapisi Dengan Bahan Berliang,, ZULKARNAIN, Sarjana
Analytical Techniques to Predict The Acoustic Response of Coir Fiber., MD. AYUB, Sarjana
NUR SYAHIRAH BINTI MOHAMAD HANAFI, Sarjana
MOHAMED SAIFUL FIRDAUS BIN HUSSIN, Sarjana
PENINGKATAN PEMINDAHAN HABA PLAT KUPRUM DISEJUKKAN CECAIR DENGAN SIRIP SERONG DAN PENYEJUK CECAIR, ALDOSRY, ABDULLH MANSUR M, Sarjana
Pengstabilan Voltan Bagi Sistem Kogenerasi Kuasa Termoelekrik Menggunakan Pengubah Penggalak, SIM SONG TUN, JASON, Sarjana
Pengurusan Haba Bateri Bagi Kenderaan Elektrik Menggunakan Plat Cecair Sejuk Dengan SiriP Serong Berlainan Susun Atur, MOHD RASHDAN BIN AWANG, Sarjana
Keliatan Patah Antara Laminar Mod II Pada Komposit Laminat Hibrid Anyaman Gentian, MOHD AZWAN BIN HUSIN, Sarjana
Sifat Lenturan Komposit Pultrusi Kenaf/Poliester Pada Suhu dan Kelajuan Hentaman Berbeza, BADRULLZAMIN BIN MOHD YASSIN, Sarjana
Proses Untuk Meminimumkan Kecacatan dalam Pemutus Komposit Polimer, SYARLINA SYAZLIZA BINTI SAAID, Sarjana

Pelajar Doktor Falsafah

ALSHAMMARI KHALID MOHAMMED DAHHAM, Doktor Falsafah
SIMULASI PENINGKATAN PEMINDAHAN HABA BAGI PENYEJUKAN UDARA SIRIP SERONG MELALUI PERMUKAAN TERALUN, HIND AZEEZ MOHAMMED HUSSEIN, Doktor Falsafah
RAJES A/P K.M.RAJAN, Doktor Falsafah
HASNAA HADI HANDAS AL ZUBAIDI, Doktor Falsafah
Kajian pemindahan haba secara kaedah hibrid denyutan cecair nano untuk penyejukan fluks haba tinggi dalam ruang terkurung, BADRULLZAMIN BIN MOHD YASSIN, Doktor Falsafah
Progressive Failure Characteristics Of Woven Natural Silk Epoxy Composite Tube In Quasi-Static Compression, RAHIM ATAOLLAHI ESHKOOR, Doktor Falsafah
Numerical Analysis and Enhancement of Vehicle Aerodynamics with Spoilers and Diffusers, BEHRANG DARYAKENARI, Doktor Falsafah
Transfer Enhancement Using Nanofluids in Laminar Pipe Flow, HYDER HASSAN ABD, Doktor Falsafah
Flow Characteristics and Heat Transfer Enhancement at Interference Zone of Twin Pulsating Circular Jets, ALI AHMED GITAN, Doktor Falsafah
Analisis Aliran Bendalir dan haba di Dalam Ruang Enjin Kenderaan., LUKEMAN BIN YUSOFF, Doktor Falsafah
A Modified Turbocharger Centrifugal Compressor for Improved Performance Map, LAYTH HASAN JAWAD, Doktor Falsafah
Evaluation Of Air-Based Photovoltaic Thermal Collectors With Bifacial Colar Cells, POORYA OOSHAKSARAEI, Doktor Falsafah
Pencirian Keboletahanan Strukutr Komposit Matriks Polimer Gentian Kaca Melalui Konsep Kelakuan Bahan, AHMAD MUBARAK BIN TAJUL ARIFIN, Doktor Falsafah
SISTEM JET SANTAKAN DEDENYUT BERKEMBAR UNTUK PENINGKATAN, AHMAD FADHIL BIN ISMAIL, Doktor Falsafah
PRESTASI TERMA DAN HIDRAULIK PLAT PENYEJUK CECAIR DENGAN REKA BENTUK DALAMAN NOVEL UNTUK PENGURUSAN TERMA BATERI KENDERAAN ELEKTRIK, MOHAMMAD YACOUB KHALAF AL SHDAIFAT, Doktor Falsafah
CIRI KEBOLEHLANGGARAN TIUB KOMPOSIT BIO-EPOKSI®/RAMIE TENUN, MAJID JAFARZADEHGHOUSHJI, Doktor Falsafah
ZULKHAIRI ZAINOL ABIDIN, Doktor Falsafah
SHIVAN ISMAEL ABDULLAH, Doktor Falsafah
ALI AMROLLAHI, Doktor Falsafah
KESAN BIOREKATAN DAUN PISANG KE ATAS APLIKASI SUHU TERNAIK, HASRAWATI BT. ABU HASSAN, Doktor Falsafah
PENINGKATAN PEMINDAHAN HABA DALAM ALIRAN SANTAKAN JET, MAHIR FARIS ABDULLAH, Doktor Falsafah
KOMPOSIT BIODEGRADASI GENTIAN KENAF/POLILAKTIK ASID SEBAGAI BAHAN PENGKUSYENAN, FARAZIAH HASSAN, Doktor Falsafah
SITI ATIQA AL ZAHRA BINTI MAT DARUS, Doktor Falsafah
PENCIRIAN STRUKTUR KOHEREN GELORAN DI ALIRAN BERSKALA ATMOSFERA, ESLAM REDA LOTFY SALEH ABDELHADY, Doktor Falsafah
SIFAT MEKANIKAL DAN TERMA MESOPARTIKEL BULUH TERAWAT/NILON, ABEER ADEL SALIH, Doktor Falsafah
ASHRAF AMER ABBAS, Doktor Falsafah
PENGACUAN SUNTIKAN SISIPAN GENTIAN KENAF DIPERKUAT POLIPROPILENA : PROSES DAN SIFAT MEKANIKAL, NORJAMALULLAIL TAMRI, Doktor Falsafah
CIRI-CIRI PEMINDAHAN HABA BAGI PLAT CECAIR SEJUK DENGAN SIRIP SERONG MENGGUNAKAN BENDALIR NANO UNTUK PENGURUSAN HABA BATERI, NUR IRMAWATI BT OM, Doktor Falsafah
Natural Fiber Reinforced Composite For Noise And Heat Insulation Application, ZALIKA BINTI YANG GHAZALI, Doktor Falsafah
Fracture Toughness Behavior And Thermal Effect To Kenaf Woven/Biodegradeable Matrix Biocomposite, MEOR SYAZALEE BIN SHA @ MEOR SHA, Doktor Falsafah
MODEL EMPIRIKAL KELAKUAN ASAP DI BAWAH KEADAAN EKSPERIMEN BERBEZA, RAZIEH KHAKSARI HADDAD, Doktor Falsafah
KHIDMAT SOSIAL / SOCIAL @ PUBLIC ENGAGEMENT
(Sumbangan),(Tempoh),(Peringkat)

Khidmat Luar

Ekspo Inovasi Islam 2014 (5th i-INOVA'14) , 29-11-2014 sehingga 30-11-2014 , Kebangsaan
Applied Mechanics and Materials , 08-12-2014 sehingga 07-12-2019 , Antarabangsa
International Technical Conference ITC2014 , 17-11-2014 sehingga 19-11-2014 , Antarabangsa
Proceedings of International Integrated Engineering Summit 2014 , 11-09-2014 sehingga 04-12-2014 , Antarabangsa
International Islamic University Malaysia , 30-10-2015 sehingga 13-12-2015 , Kebangsaan
Infrastructure University Kuala Lumpur , 01-04-2015 sehingga 31-03-2017 , Kebangsaan
Jurnal Teknologi Special Issue - TENSILE PROPERTIES OF UNIDIRECTIONAL KENAF FIBER POLYPROPYLENE COMPOSITE , 25-12-2015 sehingga 04-01-2016 , Kebangsaan
Jurnal Kejuruteraan UKM - Thermoelectric Module Analysis Behavior In Passive Temperature Gradient , 10-12-2015 sehingga 15-01-2016 , Kebangsaan
Jurnal Teknologi Special Issue - Moldability of Wood Filler Reinforced Polypropylene Composite for Injection Molded Engine Cover Using Mold Filing Simulation , 25-12-2015 sehingga 04-01-2016 , Kebangsaan
Environment and Natural Resources Journal - Effect of Densities and Surface Finishing on Sound Absorption of Oil Palm Frond , 02-10-2015 sehingga 02-11-2015 , Antarabangsa
JK Dokumen SAR JKMB , 25-05-2016 sehingga 31-12-2017 , Kebangsaan
EAC PANEL OF EVALUATOR , 07-09-2016 sehingga 31-12-2017 , Kebangsaan
Heat Characteristics of Alumina-Deionized Water Nanofluids in Horizontal Heat Pipe , 05-12-2016 sehingga 31-01-2017 , Antarabangsa
INFLUENCE OF ACID ON THE TENSILE PROPERTIES OF HALLOYSITE REINFORCED POLYURETHANE COMPOSITE , 29-11-2016 sehingga 02-12-2016 , Kebangsaan
MECHANICAL PROPERTIES OF COMPRESSION MOULDED POLYMER COMPOSITES REINFORCED WITH RANDOMLY KENAF FIBERS , 28-09-2016 sehingga 07-10-2016 , Kebangsaan
EFFECT OF FIBER COMPOSITION ON TENSILE PROPERTIES OF LONG UNIDIRECTIONAL KENAF/POLYLACTIC­ACID COMPOSITES , 28-09-2016 sehingga 07-10-2016 , Antarabangsa
Optimization of Hot Pressing Process for Unidirectional Kenaf Polypropylene Composites by Full Factorial Design , 28-09-2016 sehingga 07-10-2016 , Antarabangsa
Lembaga Jurutera Malaysia , 01-01-2017 sehingga 31-12-2017 , Kebangsaan
The Institution of Engineers, Malaysia (IEM) , 01-12-2014 sehingga 31-12-2035 , Kebangsaan
Jawatankuasa Saintifik ReCAR2017 , 01-04-2016 sehingga 30-04-2018 , Antarabangsa
4th International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR2017) , 01-04-2016 sehingga 30-04-2018 , Antarabangsa
Infrastructure University Kuala Lumpur , 01-07-2017 sehingga 30-06-2019 , Kebangsaan
Infrastructure University Kuala Lumpur , 01-07-2018 sehingga 30-06-2019 , Kebangsaan
Lembaga Jurutera Malaysia (BEM) , 01-01-2018 sehingga 31-12-2018 , Kebangsaan
External Evaluator for Yayasan Universiti Teknologi Petronas - Fundamental Research Grant (YUTP-FRG) Project , 02-05-2018 sehingga 01-05-2023 , Kebangsaan
The Institution of Engineers Malaysia (IEM) , 01-12-2014 sehingga 31-12-2035 , Kebangsaan
The Institution of Engineers Malaysia (IEM) , 01-12-2014 sehingga 31-12-2035 , Kebangsaan
Technical Commitee - The 2nd International Conference on Composite Materials Science and Technology (ICCMST 2019) , 31-10-2018 sehingga 31-05-2019 , Antarabangsa
MECHANICAL ENGINEERING MULTICONFERENCE 2019 , 01-04-2018 sehingga 30-04-2020 , Antarabangsa
Pemenang Pertandingan Penjimatan Tenaga Elektrik dan Air, Daerah Sepang, Selangor , 19-12-2018 sehingga 01-01-1970 , Daerah / Jajahan
International Conference On Advanced Processes & Systems In Manufacturing (APSIM 2019) , 30-03-2018 sehingga 31-03-2020 , Antarabangsa
Journal of Advanced Manufacturing Technology (JAMT) Special Edition 2018 , 19-02-2018 sehingga 19-03-2018 , Antarabangsa
Yayasan UTP-Fundamental Research Grant (YUTP-FRG) Application , 04-12-2018 sehingga 18-12-2018 , Kebangsaan
Yayasan UTP-Fundamental Research Grant (YUTP-FRG) Application , 26-08-2019 sehingga 04-09-2019 , Kebangsaan
Yayasan UTP-Fundamental Research Grant (YUTP-FRG) Application , 22-08-2019 sehingga 31-08-2019 , Kebangsaan
Yayasan UTP-Fundamental Research Grant (YUTP-FRG) Application , 16-06-2020 sehingga 22-06-2020 , Kebangsaan
JAWATANKUASA STRATEGIK PEMBANGUNAN PROGRAM AKADEMIK UNIVERSITI AWAM (JKSPPA) , 01-05-2020 sehingga 30-04-2023 , Kebangsaan
Penilai Luar Kenaikan Pangkat Jawatan Profesor Madya DS54 , 29-04-2022 sehingga 13-05-2022 , Kebangsaan
The Improvement of Inhalation Devices (Pressurized Metered-Dose Inhaler And Spacers) For Treating Respiratory Diseases , 23-06-2022 sehingga 01-01-1970 , Kebangsaan
External Evaluator for Yayasan Universiti Teknologi Petronas - Fundamental Research Grant (YUTP-FRG) Project , 02-05-2018 sehingga 01-05-2023 , Kebangsaan
Journal of Cleaner Production , 04-07-2022 sehingga 25-07-2022 , Antarabangsa
Heliyon , 05-07-2022 sehingga 31-07-2022 , Antarabangsa
National Standards Committee on Plastic and Plastic Products (NSC10) , 01-01-2022 sehingga 31-12-2024 , Kebangsaan
The Multi-Directional Solar Thermal Integrated Absorber with Evacuated Tube (MSiA-ET) in Solar Air Dryer Applications , 16-10-2022 sehingga 01-01-1970 , Kebangsaan

Khidmat Dalam

AHLI JAWATANKUASA PENYEDIAAN DOKUMEN SELF ASSESMENT REPORT (SAR) COPPA 2017 , 15-08-2018 sehingga 31-12-2019 , Fakulti / Institut / Pusat Perkhidmatan
Ahli Jawatankuasa Penilai Geran Penyelidikan di bawah Dana UP Tahun 2020 , 15-05-2020 sehingga 31-12-2020 , Universiti
Geran Penyelidikan Di Bawah Dana Universiti Penyelidikan (UP) Geran GGPM, DIP & GUP Tahun 2019-Peringkat Fakulti , 09-07-2019 sehingga 09-07-2019 , Fakulti / Institut / Pusat Perkhidmatan
Gotong Royong Jabatan Kejuruteraan Mekanikal & Pembuatan , 25-09-2023 sehingga 25-09-2023 , Fakulti / Institut / Pusat Perkhidmatan
JAWATANKUASA AUDIT KONGRES & PERTANDINGAN INOVASI PENGAJARAN & PEMBELAJARAN UKM (KNOVASI 2021) , 17-08-2021 sehingga 18-08-2021 , Universiti
JAWATANKUASA PENILAIAN DANA INOVASI UKM FASA 1/2022 BIL 2 , 21-09-2022 sehingga 21-09-2022 , Universiti
Jawatankkuasa Mechanical Engineering Multiconference 2019 , 01-04-2018 sehingga 30-04-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Kecil Pelaksana Bidang Keberhasilan (KRA) Teras 2 , 14-07-2014 sehingga 13-07-2017 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Kecil Pelaksana Bidang Keberhasilan (KRA) Teras 2 : Penyelidikan dan Inovasi Yang Berimpak Tinggi , 01-01-2016 sehingga 31-12-2018 , Universiti
Jawatankuasa Latihan Industri ke Syarikat Sesi 2021/2022 , 31-07-2022 sehingga 20-10-2022 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Lawatan Latihan Industri Sesi 2023 , 14-08-2023 sehingga 11-10-2023 , Universiti
Jawatankuasa Malaysia Research Assessment (MyRA) FKAB , 01-07-2016 sehingga 30-06-2019 , Universiti
Jawatankuasa Panel Penilai Dana Penyelidikan Peringkat Fakulti , 01-06-2022 sehingga 31-12-2022 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Pemeriksa Siswazah Bil 21/2017 (P) , 28-03-2017 sehingga 28-03-2017 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Pemeriksa Siswazah Bil 32/2016 , 21-04-2016 sehingga 21-04-2016 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Pemeriksa Siswazah Bil 76/2016 , 14-10-2016 sehingga 14-10-2016 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Penilaian Geran KPM TRGS/ LRGS/ FRGS/ Tahun 2020 - Peringkat Fakulti , 04-02-2020 sehingga 04-02-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Penyediaan Laporan Penilaian Kendiri Program Sarjana Kejuruteraan Mekanikal JKMP , 27-10-2023 sehingga 31-12-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit
Jawatankuasa Penyediaan Laporan Penilaian Kendiri Program Sarjana Pengurusan Teknologi Industri JKMP , 27-10-2023 sehingga 31-12-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit
Jawatankuasa Peperiksaan Lisan Bil. 1/2020 (P.KMP) , 06-01-2020 sehingga 06-01-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 15/2020 (P.JKMP) , 18-05-2020 sehingga 18-05-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 18/2019 (P.Mercu) , 11-07-2019 sehingga 11-07-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 25/2018 (P.Mercu) , 04-07-2018 sehingga 04-07-2018 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 32/2019 (P.Mercu) , 22-10-2019 sehingga 22-10-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 41/2018 (P.Sutra) , 04-12-2018 sehingga 04-12-2018 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 48/2019 (P.INTEGRA) , 06-12-2019 sehingga 06-12-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 5/2019 (P.Mercu) , 27-02-2019 sehingga 27-02-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 5/2020 (P.KMP) , 18-02-2020 sehingga 18-02-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 78/2017 (P) , 11-10-2017 sehingga 11-10-2017 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Semakan Semula Peraturan-Peraturan Universiti Kebangsaan Malaysia (Pengajian Diploma Pascasiswazah) , 01-02-2021 sehingga 01-02-2023 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Semakan Semula Peraturan-Peraturan Universiti Kebangsaan Malaysia (Pengajian Diploma Pascasiswazah) , 01-02-2021 sehingga 01-02-2023 , Universiti
Jawatankuasa Taskforce Pengurusan Peperiksaan Secara Dalam Talian , 01-10-2020 sehingga 30-09-2022 , Universiti
Jawatankuasa Taskforce Pengurusan Peperiksaan Secara Dalam Talian , 01-10-2020 sehingga 30-09-2022 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Teras 1 Pemerkasaan ePembelajaran UKM Pelan Strategik ICT UKM 2021-2025 , 25-01-2021 sehingga 24-01-2025 , Universiti
Majlis Makan Malam dan Malam Anugerah FKAB 2023 , 30-05-2023 sehingga 08-06-2023 , Fakulti / Institut / Pusat Perkhidmatan
Mesyuarat Kesepakaran Bil. 1/2023 , 03-08-2023 sehingga 03-08-2023 , Fakulti / Institut / Pusat Perkhidmatan
Mesyuarat Kesepakaran Bil. 2/2023 , 03-08-2023 sehingga 03-08-2023 , Fakulti / Institut / Pusat Perkhidmatan
Mesyuarat Kesepakaran Bil. 3/2023 , 16-10-2023 sehingga 16-10-2023 , Fakulti / Institut / Pusat Perkhidmatan
Mesyuarat Kesepakaran SERI Bil. 2/2021 , 12-08-2021 sehingga 12-08-2021 , Fakulti / Institut / Pusat Perkhidmatan
Mesyuarat Kesepakaran SERI Bil. 3/2020 , 10-11-2020 sehingga 10-11-2020 , Fakulti / Institut / Pusat Perkhidmatan
Mesyuarat Kesepakaran SERI Bil. 3/2021 , 22-11-2021 sehingga 22-11-2021 , Fakulti / Institut / Pusat Perkhidmatan
Mesyuarat Kesepakaran SERI Bil. 4/2020 , 10-11-2020 sehingga 10-11-2020 , Fakulti / Institut / Pusat Perkhidmatan
Mesyuarat Kesepakaran SERI Bil. 5/2020 , 29-12-2020 sehingga 29-12-2020 , Fakulti / Institut / Pusat Perkhidmatan
PANEL PENILAI DANA INOVASI FASA 3/2020 BIL 1 , 03-12-2020 sehingga 03-12-2020 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit
PANEL PENILAI JK PATEN 2023 , 18-05-2023 sehingga 18-05-2023 , Universiti
PANEL PENILAI PRGS 1/2021 , 10-02-2021 sehingga 09-02-2022 , Universiti
PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENDIDIKAN TINGGI (DP KPT) TAHUN 2023 , 18-03-2023 sehingga 31-12-2023 , Universiti
PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENDIDIKAN TINGGI (DP KPT) TAHUN 2024 , 16-12-2023 sehingga 31-12-2024 , Universiti
Panel Penilai Geran Penyelidikan di bawah Dana UP Tahun 2023 , 26-07-2023 sehingga 31-12-2023 , Universiti
Program Sijil Profesional Penjaminan Kualiti , 01-01-2022 sehingga 31-12-2024 , Fakulti / Institut / Pusat Perkhidmatan