Untuk Kegunaan UKM sahaja
For UKM use only
Mohd Sabirin Rahmat has started register for higher learning education level at Politeknik Port Dickson and he has awarded Certificate in Mechanical Engineering majoring automotive in 2005. In 2007, he has registered as diploma student at Politeknik Kota Bharu and he has awarded Diploma in Mechanical Engineering majoring automotive. In 2008, he continues further study at Universiti Teknikal Malaysia Melaka (UTeM) under programme Bachelor of Mechanical Engineering (Automotive) (Hons) and graduated in 2011. After a few years in industry, he continues study at Universiti Teknikal Malaysia Melaka (UTeM) and was awarded a Master of Science (Research) in Mechanical Engineering (Vehicle Dynamic Control) in 2015. In 2020, he received Doctor of Philosophy in Mechanical Engineering from Universiti Pertahanan Nasional Malaysia (UPNM). In June 2020, he was appointed by UPNM as Postdoctoral Fellows for a year. Then, In May 2021, he joined MAHSA University as a Mechanical Lecturer. Next, in August 2022, he was promoted as Head of Programme Mechanical Department (Bachelor and Diploma Programme) until 18 May 2024. In 2024, he was registered Professional Engineer with Board of Engineers Malaysia (BEM) under mechanical engineering branch. Now, he served with Universiti Kebangsaan Malaysia as Senior lecturer at department of mechanical and manufacturing engineering, faculty of engineering and built environment. His main area of specialization is in automotive vehicle dynamic, automotive control and smart materials and structures system. He actively engaged in research areas such as x-by-wire technology, vehicle safety and electric.
| Doktor Falsafah , UNIVERSITI PERTAHANAN NASIONAL MALAYSIA , 2020 |
| Sarjana Sains , UNIVERSITI TEKNIKAL MALAYSIA MELAKA , 2015 |
| AUTOMATIF , Sarjana Muda dengan Kepujian , UNIVERSITI TEKNIKAL MALAYSIA MELAKA , 2011 |
| TECHNOLOGY AND ENGINEERING - MECHANICAL AND MANUFACTURING (Vehicle Dynamic, Automotive Control, Smart Materials and Structures) |
| Mohd Anas Mohd Sabri, Nor Amirul Mustaqim Zaharudin, Mohd Faizal Mat Tahir, Wan Aizon W. Ghopa, Hawa Hishamuddin, Mohd Sabirin Rahmat & Siddig A. Omer. (2025). Simulation Of Two Stage Photovoltaic-electrodialysis Regeneration Using Engineering Equation Solver (ees). - Journal Of Advanced Research In Numerical Heat Transfer. 112 - 117. |
| Mohd Sabirin Rahmat, Zambri Harun, Sallehuddin Mohamad Haris, Meor Iqram Meor Ahmad, Mohd Faizal Mat Tahir, Rizauddin Ramli , Mohamad Hazwan Mohd Ghazali, Khisbullah Hudha & Zulkiffli Abd Kadir. (2025). Predictive Analysis Of Semi-active Engine Mount With Pid Control For Passenger Vehicle . - Journal Of Advanced Research In Applied Mechanics. 17 - 26. |
| Mohd Sabirin Rahmat, Fauzi Ahmad, Vimal Rau Aparow, Rizauddin Ramli, Sallehuddin Mohamed Haris, Mohd Anas Mohd Sabri, Meor Iqram Meor Ahmad, Mohd Muhyidin Mustafa. (2025). Predictive Performance Of Anti-lock Braking System With Pid Controller Optimized By Gravitational Search Algorithm For A Quarter Car Model: Simulation Modeling And Control. - Automotive Experiences. 372 - 383. |
| Normidatul Salwa Sobri, Khisbullah Hudha, Zulkiffli Abd Kadir*, Noor Hafizah Amer, Ku Zarina Ku Ahmad, Mohd Sabirin Rahmat. (2024). Parameter Optimization Of Anisotropic Polarization In Magnetorheological Elastomers For Enhanced Impact Absorption Capability Using The Taguchi Method. - Journal Of The Mechanical Behavior Of Materials. 1 - 12. |
| M.i.m Ahmad, M.a.m Muzafa, M.f.m. Tahir, M.s. Rahmat, M.a.m. Sabri, M. Selamat. (2024). Physical And Mechanical Properties Of Local Carbon Materials And Warm Compaction Method On The Production Of Current Collectors For Light Rail Transit (lrt) Applications. - Journal Of Mechanical Engineering. 319 - 331. |
| Mohd Anas Mohd Sabri, Meor Iqram Meor Ahmad, Nashrah Hani Jamadon, Wan Aizon W.ghopa, Nur Kamaliana Khamis, Mohd Sabirin Rahmat. (2025). Ke Arah Pengantarabangsaan Pengajaran Dan Pembelajaran Ukm: Pengalaman Pengajaran Di Henan Polytechnic, China. - International Conference On Engineering And Built Environment Education (peka 2025). . |
| Abdul Hadi Azman, Shahrum Abdullah, Mohd Zaidi Omar, Wan Fathul Hakim Wan Zamri, Norhamidi Muhamad, Mohd Sabirin Rahmat, Nurhasyimah Abdul Aziz, Rizauddin Ramli . (2025). Fostering Innovation In Product Development Within Mechanical Engineering Through Integrated Design Thinking . - Peka 2025. . |
| Mohd Anas Mohd Sabri, Meor Iqram Meor Ahmad, Nashrah Hani Jamadon, Wan Aizon W.ghopa, Nur Kamaliana Khamis, Mohd Sabirin Rahmat. (2025). Ke Arah Pengantarabangsaan Pengajaran Dan Pembelajaran Ukm: Pengalaman Pengajaran Di Henan Polytechnic, China. - International Conference On Engineering And Built Environment Education (peka 2025). . |
| Mohd Sabirin Rahmat, Rizauddin Ramli, Zambri Harun, Mohd Faizal Mat Tahir, Mohamad Hazwan Mohd Ghazaly, Mohamad Hanif Md Saad, Aidil Azlan Ahmad Zambri, Mohamad Fairuz Mohamad Keprawi . (2025). Assessment Rubric And Matrix With Complex Problem Solving And Complex Engineering Activity For Assignment And Project Based Course Evaluation In Engineering Education. - The 2025 International Conference On Engineering And Built Environment Education (peka 2025). . |
| Mohd Sabirin Rahmat. (2024). Human Machine Interface. - . . |
| Mohd Sabirin Rahmat. (2024). Programmable Logic Control. - . . |
| Mohd Sabirin Rahmat. (2024). Mitsubishi Version Plc. - . . |
| Mohd Sabirin. (2024). Magneto-rheological Fluid. - . . |
| Mohd Sabirin Rahmat. (2024). Autotronic System. - . . |
| Mohd Sabirin Rahmat. (2024). Interating Plc / Nodered/hmi/ts For Single Device. - . . |
| Mohd Sabirin Rahmat. (2024). Industrial Iot Training Kit. - . . |
| Mohd Sabirin Rahmat. (2024). Magnetorheological Technology. - . . |
| Mohd Sabirin Rahmat, Zambri Harun, Sallehuddin Mohamad Haris, Meor Iqram Meor Ahmad, Mohd Faizal Mat Tahir, Rizauddin Ramli, . (2024). Predictive Analysis Of Semi-active Engine Mount With Pid Control For Passenger Vehicle. - 7th International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2024). . |
| Coupled machine learning and physics-based simulation approaches for sustainability prediction of 3D printed foamed concrete , Penyelidik Bersama , 02-01-2025 sehingga 01-01-2027 , Antarabangsa |
| INITIAL COVARIANCE MATRIX FORMULATION FOR TURTLEBOT3 MOBILE ROBOT , 30-05-2024 sehingga 20-06-2024 , Kebangsaan |
| Viscoelastic properties of electro-rheological fluids containing ion-conductive polyurethane particles under electric field , 26-06-2024 sehingga 10-07-2024 , Antarabangsa |
| Measurement Science and Technology , 28-08-2024 sehingga 08-09-2024 , Antarabangsa |
| Human-Simulated Intelligent Control of Torsional Vibration in Magneto-rheological Variable Stiffness-Damping-Moment of Inertia Transmission System based on Hybrid Taguchi Genetic Algorithm , 23-08-2024 sehingga 02-09-2024 , Antarabangsa |
| Engineering, Science and Technology Exhibition 2024 , 07-08-2024 sehingga 07-08-2024 , Kebangsaan |
| KUMPULAN FOKUS BAGI KAJIAN RANGKA KERJA EKONOMI KITARAN DI MALAYSIA , 20-03-2025 sehingga 21-03-2025 , Kebangsaan |
| Optimal control method based on soft landing principle for shock magnetorheological buffer system , 08-01-2025 sehingga 03-04-2025 , Antarabangsa |
| Optimization of Magnetorheological Elastomer Composition and Ferrous Particle Size for Enhanced Sound Absorption Performance , 05-04-2025 sehingga 08-04-2025 , Kebangsaan |
| SENSOR FUSION TECHNOLOGY ADVANCEMENT IN GPS-AIDED LOCALIZATION FOR AUTONOMOUS MOBILE ROBOTS: A COMPREHENSIVE SURVEY , 10-03-2025 sehingga 18-04-2025 , Antarabangsa |
| Evaluating Student Engagement with Generative AI Through a Fuzzy Logic-Based Intelligent Assessment Tool , 16-04-2025 sehingga 21-04-2025 , Kebangsaan |
| University of Nizwa , 16-04-2025 sehingga 17-04-2025 , Antarabangsa |
| University of Nizwa , 16-04-2025 sehingga 17-04-2025 , Antarabangsa |
| Validation of Half-Bridge Strain Gauge-based Low-Cost Force Plates in Measuring Vertical Ground Reaction Force and Center of Pressure during Recovery Assessments , 15-05-2025 sehingga 21-05-2025 , Antarabangsa |
| Validation of Half-Bridge Strain Gauge-based Low-Cost Force Plates in Measuring Vertical Ground Reaction Force and Center of Pressure during Recovery Assessments , 15-05-2025 sehingga 21-05-2025 , Antarabangsa |
| Multi-Objective Optimization of Structural Design for Lightweight Vehicle Chassis , 01-07-2025 sehingga 14-08-2025 , Antarabangsa |
| Development And Evaluation Of Passive Balancing System Model For Lithium-Ion Battery Pack In Electric Vehicles Using Numerical Simulation , 27-08-2025 sehingga 30-08-2025 , Antarabangsa |
| Ahli Jawatankuasa Jaringan Penyelidikan Industri Minggu Penyelidikan RICH@2024 , 02-05-2024 sehingga 31-12-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Felo Bersekutu Pusat Kecemerlangan Penyelidikan (CoE) FKAB , 05-06-2024 sehingga 04-06-2027 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Gotong Royong JKMP 4/2024 Sempena Lawatan Audit MQA , 20-06-2024 sehingga 20-06-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Gotong-Royong MAW 2024 JKMP, FKAB , 27-09-2024 sehingga 27-09-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Gotong-Royong MAW 2024 JKMP, FKAB , 30-09-2024 sehingga 30-09-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 2/2025 (P.JKMP) , 17-03-2025 sehingga 17-03-2025 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil.21/2024 (P.JKMP) - P100118 , 19-11-2024 sehingga 19-11-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA JARINGAN PENYELIDIKAN INDUSTRI MINGGU PENYELIDIKAN Research, Innovation & Commercialization Highlights RICH@FKAB 2024 , 02-05-2024 sehingga 31-12-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENYEDIAAN LAPORAN INTERIM PROGRAM SARJANA MUDA KEJURUTERAAN MEKANIKAL JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN , 10-07-2024 sehingga 09-08-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA SEMAKAN PROGRAM PRASISWAZAH JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN TAHUN 2025 , 01-02-2025 sehingga 31-01-2026 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Pelantikan Sebagai Juri Pertandingan MIKEF 2024 - Aerodash: Cabaran Kereta F1 , 04-06-2024 sehingga 04-06-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |