Mohamad Najib Mohd Kasmani, Noor Faeizah Amat, Meor Iqram Meor Ahmad, Andanastuti Muchtar.  (2021).  Prestasi mekanik korona zirkonia monolitik melalui kaedah unsur terhingga.  - Sains Malaysiana.  1077-1087. 

Siti Mariam Daud, Mimi Hani Abu Bakar, Wan Ramli Wan Daud, Byung Hong Kim, Jamaliah Md Jahim, Andanastuti Muchtar, Mahendra Roa Somalu, Pak Hoe Lee, Peer Mohamed Abdul.  (2021).  Improvement of microbial fuel cell performance using novel kaolin earthenware membrane coated with a polybenzimidazole layer.  - Energy Science & Engineering.  2342-2353. 

Tan Koon Tatt, Norhamidi Muhamad, Andanastuti Muchtar, Abu Bakar Sulong & Kok Yih Shia.  (2021).  Production of porous stainless steel using the space holder method.  - Sains Malaysiana.  507-514. 

Nurul Ashikin Mohd Nazrul Aman, Andanastuti Muchtar, Masli Irwan Rosli, Nurul Akidah Baharuddin, Mahendra Rao Somalu, Noor Shieela Kalib.  (2020).  Influence of thermal conductivity on the thermal behavior of intermediate-temperature solid oxide fuel cells.  - Journal of Electrochemical Science and Technology.  132-139. 

Abdul Azim Jais, S. A. Muhammed Ali, Mustafa Anwar, Mahendra Rao Somalu, Andanastuti Muchtar, Wan Nor Roslam Wan Isahak, Nurul Akidah Baharuddin, Kean Long Lim, Nigel P. Brandon.  (2020).  Performance of Ni/10Sc1CeSZ anode synthesized by glycine nitrate process assisted by microwave heating in a solid oxide fuel cell fueled with hydrogen or methane.  - Journal of Solid State Electrochemistry.  711-722. 

Abdullah Abdul Samat, Mahendra Rao Somalu, Andanastuti Muchtar, Hamimah Abd. Rahman & Nafisah Osman.  (2020).  Pengaruh agen kimia berbeza terhadap penguraian terma dan pembentukan fasa bahan La0.6Sr0.4CoO3-d yang disediakan melalui kaedah sol-gel.  - Sains Malaysiana.  3197-3208. 

Isyraf Aznam, Joelle Mah Chia Wen, Andanastuti Muchtar, Nurul Akidah Baharuddin, Mahendra Rao Somalu, Mariyam Jameelah Ghazali.  (2019).  Kelakuan pengoksidaan keluli tahan karat berferit SUS430 dan kesan pemeruapan spesies Cr bergas kepada permukaan katod LSCF dalam suhu operasi sel fuel oksida pepejal.  - Sains Malaysiana.  861-869. 

Nor Fatina Raduwan, S.A. Muhammed Ali, Mustafa Anwar, Andanastuti Muchtar, Mahendra Rao Somalu.  (2019).  Effect of ball milling time on the properties of nickel oxide-samarium-doped cerium composite anodes for solid oxide fuel cells.  - International Journal of Materials and Product Technology.  16-254. 

Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Mohd Yusuf Zakaria.  (2018).  Pengoptimuman parameter pengacuan suntikan terhadap ketumpatan jasad anum untuk komposit aloi titanium-wolastonit.  - Sains Malaysiana.  . 

Abdullah Abdul Samat, Shazana Mohd Senari, Mahendra Rao Somalu, Andanastuti Muchtar, Oskar Hasdinor Hassan, Nafisah Osman.  (2018).  Heat treatment effect on the phase and morphology of NiO-BCZY prepared by an evaporation and decomposition of solution and suspension method.  - Sains Malaysiana.  . 

Wan Nor Anasuhah Wan Yusof, Abdullah Abdul Samat, Nur Wardah Norman, Mahendra Rao Somalu, Andanastuti Muchtara, Nurul Akidah Baharuddin.  (2018).  Synthesis and characterization of Zn-doped LiCoO2 material prepared via glycine-nitrate combustion method for proton conducting solid oxide fuel cell application.  - Jurnal Kejuruteraan.  . 

Nur Wardah Norman, Wan Nor Anasuhah Wan Yusoff, Abdullah Abdul Samat & Andanastuti Muchtar.  (2018).  Penyediaan pelet elektrolit Sr0.6Ba0.4Ce0.9Ga0.1O3-d melalui kaedah glisina nitrat bagi aplikasi sel fuel oksida pepejal konduktor proton.  - Jurnal Kejuruteraan.  . 

Chuin Hao Chin, Andanastuti Muchtar, Che Husna Azhari, Masfueh Razali & Mohamed Aboras.  (2018).  Improvement of colloidal stability in colloidal processing for highly translucent, nanosized zirconia.  - Sains Malaysiana.  . 

Nurul Akidah Baharuddin, Andanastuti Muchtar, Dedikarni Panuh.  (2018).  Elektrolit dwi lapisan bagi sel fuel oksida pepejal bersuhu sederhana-rendah: ulasan kajian.  - Jurnal Kejuruteraan.  . 

Noor Faeizah Amat, Shari Lawuo Raji, Andanastuti Muchtar, Muhammad Sufiyan Amril, Mariyam Jameelah Ghazali, Norziha Yahaya.  (2018).  Influence of presintering parameters on the mechanical properties of presintered dental zirconia block.  - International Journal of Integrated Engineering.  . 

Nurul Ashikin Mohd Nazrul Aman, Andanastuti Muchtar, Mahendra Rao Somalu, Masli Irwan Rosli, Nurul Akidah Baharuddin, Noor Shieela Kalib.  (2018).  A short review on the modeling of solid-oxide fuel cells by using computational fluid dynamics: assumptions and boundary conditions.  - International Journal of Integrated Engineering.  . 

Nor Fatina Raduwan, Andanastuti Muchtar, Mahendra Rao Somalu, Nurul Akidah Baharuddin, Muhammed Ali SA.  (2018).  Challenges in fabricating solid oxide fuel cell stacks for portable applications: a short review.  - International Journal of Integrated Engineering.  . 

Mohadeseh Seyednezhad, Armin Rajabi, Andanastuti Muchtar, Mahendra Rao Somalu, Poorya Ooshaksaraei.  (2017).  Effect of compaction pressure on the performance of a non-symmetrical NiO-SDC/SDC composite anode fabricated by conventional furnace.  - Journal of Asian Ceramic Societies.  77-81. 

Nidal Wanis Elshereksi, Mariyam Jameelah Ghazali, Andanastuti Muchtar & Che Husna Azhari.  (2017).  Review of titanate coupling agents and their application for dental composite fabrication.  - Dental Materials Journal.  539-552. 

Mariyam Jameelah Ghazali, Ahmad Firdaus Shamsul Baharin, Juyana A Wahab, Andanastuti Muchtar.  (2017).  Erosive wear resistance of dimpled ceramic coatings on mild steels.  - Industrial Lubrication and Tribology.  155-159. 

Leong Chee Huan, Andanastuti Muchtar, Tan Chou Yong, Masfueh Razali & Chin Chuin Hao.  (2017).  Sinteran hidroksiapatit dalam atmosfera nitrogen untuk peningkatan sifat mikrokekerasan.  - Sains Malaysiana.  1635-1640. 

Sarizal Md Ani, Andanastuti Muchtar, Norhamidi Muhamad & Jaharah A. Ghani.  (2017).  Kesan suhu pensinteran terhadap sifat mekanik dan mikrostruktur alumina zirkonia yang difabrikasi dengan kaedah pengacuan suntikan seramik.  - Sains Malaysiana.  1979-1986. 

S. Mahalingam, H. Abdullah, I. Ashaari, S. Shaari, A. Muchtar.  (2016).  Influence of heat treatment process in In2O3-MWCNTs as photoanode in DSSCs.  - Ionics.  711-719. 

S. Mahalingam, H. Abdullah, S. Shaari, A. Muchtar.  (2016).  Morphological and electron mobility studies in nanograss In2O3 DSSC incorporating multi-walled carbon nanotubes.  - Ionics.  1985-1997. 

K.H.Ng, S.Lidiyawati, Mahendra Rao Somalu, Andanastuti Muchtar, Hamimah Abdul Rahman.  (2016).  Influence of calcination on the properties of nickel oxide-samarium doped ceria carbonate (NiO-SDCC) composite anodes.  - Procedia Chemistry.  267-274. 

C.K. Ng, S. Ramesh, C.Y. Tan, C.Y. Ching, N. Lwin, A. Muchtar..  (2016).  Effect of manganese oxide on the densification and properties of ceria-doped scandia stabilized zirconia.  - Journal of Ceramic Processing Research.  443-447. 

Baharuddin N.A., Muchtar A., Somalu M.R., Sulong A.B., Abdullah H..  (2016).  Effects of sintering temperature on the electrochemical performance of solid oxide fuel cell (SOFC) composite cathode LSCF-SDCC.  - Sains Malaysiana.  459-465. 

Lily Siong Mahmud, Andanastuti Muchtar, Mahendra Rao Somalu.  (2016).  Influence of sintering temperature on NiO-SDCC anode for low-temperature solid oxide fuel cells (LT-SOFCs).  - Ceramics-Silikaty.  317-323. 

Nurul Akidah Baharuddin, Andanastuti Muchtar, Mahendra Rao Somalu, Muhammed Ali S.A., Hamimah Abd. Rahman.  (2016).  Influence of sintering temperature on the polarization resistance of La0.6Sr0.4Co0.2Fe0.8O3-d-SDC carbonate composite cathode.  - Ceramics-Silikaty.  115-121. 

Nurul Akidah Baharuddin, Andanastuti Muchtar, Mahendra Rao Somalu, Abu Bakar Sulong, Huda Abdullah.  (2016).  Pengaruh Suhu Sinter terhadap Prestasi Elektrokimia Katod Komposit Sel Bahan Api Oksida Pepejal (SOFC) LSCF-SDCC.  - Sains Malaysiana.  459-465. 

M. Ahmadrezaei, S. A. Muhammed Ali, A. Muchtar, C.Y.Tan , M.R. Somalu.  (2014).  Thermal expansion behavior of the BO0.2Sr0.8Co0.8Fe0.2O3-8 (BSCF) with Sm0.2Ce0.8O1.9.  - Ceramics-Silikaty.  46-49. 

M. I. Ramli, A. B. Sulong, N. Muhamad, A. Muchtar and A. Arifin.  (2014).  Stainless steel 316L hydroxyapatite composite via powder injection moulding: rheological and mechanical properties characterisation.  - Material Research Innovation.  100-104. 

Baharuddin N.A., Rahman H.A., Muchtar A., Sulong A.B., Abdullah H..  (2014).  Effects of deposition time and counter-electrode size on the fabrication of LSCF-SDC carbonate composite cathode for SOFC.  - Sains Malaysiana.  595 - 601. 

Leong Chee Huan, Andanastuti Muchtar, Tan Chou Yong, Masfueh Razali, Noor Faeizah Amat.  (2014).  Sintering of hydroxyapatite/yttria stabilized zirconia nanocomposites under nitrogen gas for dental materials.  - Advances in Materials Science and Engineering.  Art no.367267. 

N. Mohamad, M.A. Mahamood, Y.Juliana, A.R. Jeefferie, A. Muchtar, M.I. Shueb, M.S. Kassim, M.A. Azam, Y.M.Yuhazri, N.Mustafa, A.R. Toibah, T.R. Sahroni dan Q. Ahsan.  (2014).  Functionalisation of ethylene-propylene copolymer by melt grafting of maleic anhydride using a high shear internal mixer.  - Materials Research Innovations.  36-42. 

Dedikarni Panuh, Andanastuti Muchtar, Norhamidi Muhamad, Edy Herianto Majlan, Wan Ramli Wan Daud.  (2014).  Elektrolit Dwi Lapisan Sm0.2Ce0.8O1.90 (SDC)/ Y0.25Bi0.75O1.5 (YSB) untuk Sel Fuel Oksida Pepejal Bersuhu Sederhana.  - Sains Malaysiana.  1769-1774. 

Nidal W. Elshereksi, Mariyam J. Ghazali, Andanastuti Muchtar, and Che H. Azhari.  (2014).  Perspectives for Titanium-Derived Fillers Usage on Denture Base Composite Construction: A Review Article.  - Advances in Materials Science and Engineering.  1-13. 

Cheah G.P., Tan C.Y., Yusof F., Muchtar A., Lim K.F., Yap B.K..  (2014).  The effects of sintering behavior of zirconiadoped hydroxyapatite for clinical applications.  - Materials Research Innovations.  151-154. 

Nurul Akidah Baharuddin, Hamimah Ab Rahman, Andanastuti Muchtar, Abu Bakar Sulong & Huda Abdullah.  (2014).  Kesan Masa Pengendapan dan Saiz Elektrod Pembalik dalam Penghasilan Katod Komposit LSCF-SDC Karbonat Sel Fuel Oksida Pepejal.  - Sains Malaysiana.  43(4): 595-601. 

Sarizal Md Ani, Andanastuti Muchtar, Norhamidi Muhamad and Jaharah A. Ghani.  (2013).  Pencirian Keseragaman Campuran dan Sifat Reologi Serbuk Alumina-Zirkonia untuk Pengacuan Suntikan Seramik.  - Sains Malaysiana.  42(9):1311-1317. 

Nurul Akidah Baharuddin, Hamimah Abd. Rahman, Andanastuti Muchtar, Abu Bakar Sulong, Huda Abdullah.  (2013).  Development of lanthanum strontium cobalt ferrite composite cathodes for intermediate- low temperature solid oxide fuel cells.  - Journal of Zhejiang University-Science A.  11-24. 

Jarot Raharjo, Andanastuti Muchtar*, Wan Ramli Wan Daud, Norhamidi Muhamad & Edy Herianto Majlan.  (2012).  Pencirian fizikal dan terma komposit seramik elektrolit SDC-(Li/Na)2CO3 (Physical and thermal characterisations of SDC-(Li/Na)2CO3 electrolyte ceramic composites).  - Sains Malaysiana.  41(1): 95-102. 

Dedikarni Panuh, Andanastuti Muchtar*, Norhamidi Muhamad & Wan Ramli Wan Daud.  (2012).  Kesan rawatan haba terhadap mikrostruktur katod berliang Ag2O3-Bi2O3 di atas substrat keluli kalis karat yang disediakan dengan kaedah pengecatan sluri.  - Sains Malaysiana.  41(1): 121-127. 

Hamimah Abd Rahman, Andanastuti Muchtar, Syaharizan Haron, Norhamidi Muhamad & Huda Abdullah.  (2012).  Kesan parameter pemprosesan dan bahan tambah terhadap pengendapan elektroforetik filem LSCF6428.  - Sains Malaysiana.  41(2): 237-244. 

Ahmad, S; Muhamad, N; Muchtar, A; Sahari, J; Jamaludin, KR; Ibrahim, MHI; Nor, NHM; Murtadhahadi.  (2010).  Characterisation of Titanium Foams Sintered at Different Temperatures Prepared by the Slurry Method.  - Sains Malaysiana.  39(1):77-82. 

Noraiham Mohamad, Andanastuti Muchtar, Mariyam Jameelah Ghazali, Dahlan Hj. Mohd and Che Husna Azhari.  (2010).  Correlation of filler loading and silane coupling agent on the physical characteristics of epoxidized natural rubber-alumina nanoparticles composites.  - Journal of Elastomers and Plastics.  .