nor anisa arifin, abdullah a. afifi, ayesha samreen, r.s.r.m. hafriz, andanastuti muchtar.  (2023).  characteristic and challenges of scandia stabilized zirconia as solid oxide fuel cell material - in depth review.  - solid state ionics.  1-23. 

lina troskialina, nor anisa arifin, rizki putri andarini, andanastuti muchtar, aman dhir, robert steinberger-wilckens.  (2023).  effect of sn loading variation on the electrochemical performance of dry internal reforming of biogas in solid oxide fuel cells.  - international journal of hydrogen energy.  1136-1145. 

wan nor anasuhah wan yusoff, nur nadhihah mohd tahir, nurul akidah baharuddin*, mahendra rao somalu, andanastuti muchtar, lai jian wei.  (2023).  effects of roller speed on the structural and electrochemical properties of lico0.6sr0.4o2 cathode for solid oxide fuel cell application.  - sustainable energy technologies and assessments.  1-7. 

naziratul adirah nasarudin, masfueh razali, victor goh, wen lin chai, andanastuti muchtar.  (2023).  expression of interleukin-1b and histological changes of the three-dimensional oral mucosal model in response to yttria-stabilized nanozirconia.  - materials.  1-12. 

dyg siti nurzailyn abg shamsuddin, ahmad faris mohd fekeri, andanastuti muchtar, faisal khan, bee chin khor, bee huah lim, masli irwan rosli, mohd sobri takriff.  (2023).  computational fluid dynamics modelling approaches of gas explosion in the chemical process industry: a review.  - process safety and environmental protection.  112-138. 

ainaa nadhirah zainon, mahendra rao somalu, audi majdan kamarul bahrain, andanastuti muchtar, nurul akidah baharuddin, muhammed ali s.a, abdullah abdul samat, nafisah osman, abul kalam azad.  (2023).  influence of sintering temperature on the properties of the screen-printed anode of the lsmo4 ruddlesden-popper perovskite for intermediate-temperature solid oxide fuel cells.  - international journal of hydrogen energy.  38425-38437. 

wan nor anasuhah wan yusoff, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar, nigel p. brandon, huiqing fan.  (2023).  recent advances and influencing parameters in developing electrode materials for symmetrical solid oxide fuel cells.  - international journal of minerals, metallurgy and materials.  1933-1956. 

nur hanisah hadi, mahendra rao somalu, abdullah abdul samat, wan nor anasuhah wan yusoff, andanastuti muchtar, nurul akidah baharuddin, muhammed ali shaikh abdul, jarot raharjo, deni shidqi khaerudini, abdalla m. abdalla, abul kalam azad.  (2023).  understanding the impact of sintering temperature on the properties of nibczy composite anode for protonic ceramic fuel cell application.  - processes.  1-19. 

azreen junaida abd aziz, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar, sahrim haji ahmad.  (2023).  kesan suhu pensinteran terhadap mikrostruktur dan sifat mekanikal perovskit seramik srfe0.9ti0.1o3-d-sdc.  - sains malaysiana.  1303-1314. 

ainaa nadhirah zainon, mahendra rao somalu, audi majdan kamarul bahrain, andanastuti muchtar, nurul akidah baharuddin, muhammed ali s.a., nafisah osman, abdullah abdul samat, abul kalam azad, nigel p. brandon.  (2023).  challenges in using perovskite-based anode materials for solid oxide fuel cells with various fuels: a review.  - international journal of hydrogen energy.  20441-20464. 

nur wardah norman, mahendra rao somalu, andanastuti muchtar, nurul akidah baharuddin, sa muhammed ali, abul kalam azad, jarot raharjo, deni shidqi khaerudini, nigel p brandon.  (2023).  influence of transition or lanthanide metal doping on the properties of sr0.6ba0.4ce0.9m0.1o3-d (m = in, pr or ga) electrolytes for proton-conducting solid oxide fuel cells.  - ceramics international.  17018-17031. 

constance l. gnanasagaran, karthikeyan ramachandran, nashrah hani jamadon, vishaal harikrishna kumar, andanastuti muchtar, ashwath pazhani, beenish ayaz.  (2023).  microstructural and mechanical behaviours of y-tzp prepared via slip-casting and fused deposition modelling (fdm).  - heliyon.  1-10. 

joelle c. w. mah, isyraf aznam, andanastuti muchtar, mahendra rao somalu, jarot raharjo.  (2023).  synthesis of (cu,mn,co)3o4 spinel: effects of citrate-to-nitrate ratio on its homogeneity and electrical properties.  - energies.  1-11. 

muhammed ali s.a., andanastuti muchtar, jarot raharjo, deni shidqi khaerudini.  (2022).  a review on the process-structure-performance of lanthanum strontium cobalt ferrite oxide for solid oxide fuel cells cathodes.  - international journal of integrated engineering.  121-137. 

ahmad fuzamy mohd abd fatah, ahmad zaki rosli, ahmad azmin mohamad, andanastuti muchtar, muhammed ali s.a., noorashrina a. hamid.  (2022).  electrochemical evaluation of nickel oxide addition toward lanthanum strontium cobalt ferrite cathode for intermediate temperature solid oxide fuel cell itsofcs.  - energies.  1-15. 

mustafa anwar, muhammed ali s.a., uneeb masood khan, muhammad hassan, asif hussain khoja, andanastuti muchtar.  (2022).  a review of x-ray photoelectron spectroscopy technique to analyze the stability and degradation mechanism of solid oxide fuel cell cathode materials.  - materials.  1-23. 

azreen junaida abd aziz, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar.  (2022).  layering optimization of the srfe0.9ti0.1o3-d-ce0.8sm0.2o1.9 composite cathode.  - molecules.  1-11. 

n.a. nasarudin, m. razali, v. goh, a. muchtar.  (2022).  expression of inflammatory mediators and histological changes of 3d oral mucosal model in response to yttria stabilized nano-zirconia.  - journal of clinical periodontology.  228-229. 

dyg siti nurzailyn abg shamsuddin, andanastuti muchtar, darman nordin, faisal khan, lim bee huah, masli irwan rosli, mohd sobri takriff.  (2022).  dynamic hazard identification on solid oxide fuel cell system using bayesian networks.  - international journal of integrated engineering.  93-105. 

nidal w. elshereksi, fathie a. kundie, andanastuti muchtar, che h. azhari.  (2022).  protocols of improvements for pmma denture base resin: an overview.  - journal of metals materials and minerals.  1-11. 

ahmad fuzamy mohd abd fatah, ahmad zaki rosli, ahmad azmin mohamad, andanastuti muchtar, muhammed ali s.a., noorashrina a. hamid.  (2022).  electrochemical evaluation of nickel oxide addition toward lanthanum strontium cobalt ferrite cathode for intermediate temperature solid oxide fuel cell (it-sofcs).  - energies.  1-15. 

nur nadhihah mohd tahir, nurul akidah baharuddin, wan nor anasuhah wan yusoff, azreen junaida abd aziz, mahendra rao somalu, andanastuti muchtar.  (2022).  physical and electrochemical characteristics of lico0.6sr0.4o2 cathode ink for intermediate-low temperature solid oxide fuel cell.  - malaysian journal of analytical sciences.  640-651. 

nur hanisah hadi, mahendra rao somalu, abdullah abdul samat, andanastuti muchtar, nurul akidah baharuddin, mustafa anwar.  (2021).  a review on the preparation of anode materials and anode films for solid oxide fuel cell applications.  - international journal of energy research.  14357-14388. 

mohamad najib mohd kasmani, noor faeizah amat, meor iqram meor ahmad, andanastuti muchtar.  (2021).  prestasi mekanik korona zirkonia monolitik melalui kaedah unsur terhingga.  - sains malaysiana.  1077-1087. 

tan koon tatt, norhamidi muhamad, andanastuti muchtar, abu bakar sulong & kok yih shia.  (2021).  production of porous stainless steel using the space holder method.  - sains malaysiana.  507-514. 

siti mariam daud, mimi hani abu bakar, wan ramli wan daud, byung hong kim, jamaliah md jahim, andanastuti muchtar, mahendra roa somalu, pak hoe lee, peer mohamed abdul.  (2021).  improvement of microbial fuel cell performance using novel kaolin earthenware membrane coated with a polybenzimidazole layer.  - energy science & engineering.  2342-2353. 

isyraf aznam, joelle c.w. mah, andanastuti muchtar, nurul akidah baharuddin, mahendra r. somalu, rahimi l. muhamud.  (2021).  influence of mixing time during glycine-nitrate process on the structural properties and reducibility of a dual-phase ni-cu-mn spinel catalyst.  - ceramics international.  34712-34720. 

dedikarni panuh, s.a. muhammed ali, dody yulianto, muhammad fadhlullah shukur, andanastuti muchtar.  (2021).  effect of yttrium-stabilized bismuth bilayer electrolyte thickness on the electrochemical performance of anode-supported solid oxide fuel cells.  - ceramics international.  6310-6317. 

q. sarmad, u.m. khan, m. anwar, a.h. khoja, m. ali, z.s. khan, a. muchtar, m.r. somalu.  (2021).  catalytic performance of calcium-lanthanum co-doped ceria (ce0.85-xla0.15caxo2-d) in partial oxidation of methane.  - bulletin of chemical reaction engineering & catalysis.  548-554. 

sharmini arumugam, hsu zenn yew, safura anita baharin, jasmina qamaruz zaman, andanastuti muchtar, shalini kanagasingam.  (2021).  micro-computed tomography evaluation of dentinal microcracks following canal preparation with thermomechanically heat-treated engine-driven file.  - australian endodontic journal.  520-530. 

muhammed ali shaikh abdul, ahmad zubair yahaya, mustafa anwar, mun teng soo, andanastuti muchtar, vadim m. kovrugin.  (2021).  effect of synthesis method of nickel-samarium-doped ceria anode on distribution of triple-phase boundary and electrochemical performance.  - crystals.  1-17. 

isyraf aznam, joelle c.w. mah, andanastuti muchtar, mahendra r. somalu, mariyam j. ghazali.  (2021).  electrophoretic deposition of (cu,mn,co)3o4 spinel coating on sus430 ferritic stainless steel: process and performance evaluation for solid oxide fuel cell interconnect applications.  - journal of the european ceramic society.  1360-1373. 

muhammed ali s.a., jarot raharjo, mustafa anwar, deni shidqi khaerudini, andanastuti muchtar, luca spiridigliozzi, mahendra rao somalu.  (2020).  carbonate-based lanthanum strontium cobalt ferrite (lscf)-samarium-doped ceria (sdc) composite cathode for low-temperature solid oxide fuel cells.  - applied sciences.  1-14. 

ahmad zubair yahaya, mahendra rao somalu, andanastuti muchtar, shaharin anwar sulaiman, wan ramli wan daud.  (2020).  effects of temperature on the chemical composition of tars produced from the gasification of coconut and palm kernel shells using downdraft fixed-bed reactor.  - fuel: the science and technology of fuel and energy.  1-12. 

nor haliza mat-baharin, masfueh razali, shahida mohd-said, junaidi syarif, andanastuti muchtar.  (2020).  influence of alloying elements on cellular response and in-vitro corrosion behavior of titanium-molybdenum-chromium alloys for implant materials.  - journal of prosthodontic research.  490-497. 

azreen junaida abd aziz, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar.  (2020).  review of composite cathodes for intermediate-temperature solid oxide fuel cell applications.  - ceramics international.  23314-23325. 

abdul azim jais, s. a. muhammed ali, mustafa anwar, mahendra rao somalu, andanastuti muchtar, wan nor roslam wan isahak, nurul akidah baharuddin, kean long lim, nigel p. brandon.  (2020).  performance of ni/10sc1cesz anode synthesized by glycine nitrate process assisted by microwave heating in a solid oxide fuel cell fueled with hydrogen or methane.  - journal of solid state electrochemistry.  711-722. 

wan nor anasuhah wan yusoff, mahendra rao somalu, nurul akidah baharuddin, andanastuti muchtar, lai jian wei.  (2020).  enhanced performance of lithiated cathode materials of lico0.6x0.4o2 (x = mn, sr, zn) for proton-conducting solid oxide fuel cell applications.  - international journal of energy research.  11783-11793. 

abdullah abdul samat, mahendra rao somalu, andanastuti muchtar, hamimah abd. rahman & nafisah osman.  (2020).  pengaruh agen kimia berbeza terhadap penguraian terma dan pembentukan fasa bahan la0.6sr0.4coo3-d yang disediakan melalui kaedah sol-gel.  - sains malaysiana.  3197-3208. 

siti mariam daud, wan ramli wan daud, mimi hani abu bakar, byung hong kim, mahendra rao somalu, andanastuti muchtar, jamaliah md jahim, s. a. muhammed ali.  (2020).  low-cost novel clay earthenware as separator in microbial electrochemical technology for power output improvement.  - bioprocess and biosystems engineering.  1369-1379. 

nurul ashikin mohd nazrul aman, andanastuti muchtar, masli irwan rosli, nurul akidah baharuddin, mahendra rao somalu, noor shieela kalib.  (2020).  influence of thermal conductivity on the thermal behavior of intermediate-temperature solid oxide fuel cells.  - journal of electrochemical science and technology.  132-139. 

noor faeizah amat, andanastuti muchtar, hsu zenn yew, muhammad sufiyan amril, rahimi l. muhamud.  (2020).  machinability of a newly developed pre-sintered zirconia block for dental crown applications.  - materials letters.  1-4. 

joelle chia wen mah, muhamad isyraf aznam, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali.  (2020).  cr vaporisation and oxidation behaviour of sus430 stainless steel in the simulated cathodic environment of solid oxide fuel cells.  - malaysian journal of microscopy.  124-132. 

ahmad zubair yahaya, mahendra rao somalu, andanastuti muchtar, shaharin anwar sulaiman, wan ramli wan daud.  (2019).  effect of particle size and temperature on gasification performance of coconut and palm kernel shells in downdraft fixed-bed reactor.  - energy.  931-940. 

nur lina rashidah mohd rashid, abdullah abdul samat, abdul azim jais, mahendra rao somalu, andanastuti muchtar, nurul akidah baharuddin, wan nor roslam wan isahak.  (2019).  review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell.  - ceramics international.  . 

mohamed aboras, andanastuti muchtar, che husna azhari, norziha yahaya, joelle c.w. mah.  (2019).  enhancement of the microstructural and mechanical properties of dental zirconia through combined optimized colloidal processing and cold isostatic pressing.  - ceramics international.  1831-1836. 

noor faeizah amat, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali, norziha yahaya.  (2019).  effect of sintering temperature on the aging resistance and mechanical properties of monolithic zirconia.  - journal of materials research technology.  1092-1101. 

mustafa anwar, muhammed ali s.a, andanastuti muchtar, mahendra rao somalu.  (2019).  synthesis and characterization of m-doped ceria-ternary carbonate composite electrolytes (m=erbium , lanthanum and strontium) for low-temperature solid oxide fuel cells.  - journal of alloys and compounds.  571-580. 

muhammed ali s.a., mustafa anwar, lily siong mahmud, noor shieela kalib, andanastuti muchtar, mahendra rao somalu.  (2019).  influence of current collecting and functional layer thickness on the performance stability of la0.6sr0.4co0.2fe0.8o3-s-ce0.8sm0.2o1.9 composite cathode.  - journal of solid state electrochemistry.  1155-1164. 

nurul akidah baharuddin, nurul ashikin mohd nazrul aman, andanastuti muchtar, mahendra rao somalu, abdullah abdul samat, muhamad isyraf aznam.  (2019).  structural, morphological, and electrochemical behavior of titanium-doped srfe1-xtixo3-d (x=0.1-0.5) perovskite as a cobalt-free solid oxide fuel cell cathode.  - ceramics international.  12903-12909. 

mustafa anwar, muhammed ali s.a, andanastuti muchtar, mahendra rao somalu.  (2019).  influence of strontium co-doping on the structural, optical, and electrical properties of erbium-doped ceria electrolyte for intermediate temperature solid oxide fuel cells.  - ceramics international.  5627-5636. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2019).  effect of sintering on the microstructure and mechanical properties of alloy titaniumwollastonite composite fabricated by powder injection moulding process.  - ceramics international.  11648-11653. 

h.a. rahman, k.h. ng, s. ahmad, h. taib, s. mahzan, s. m. salleh, a. ismail and a. muchtar.  (2019).  influence of microstructure on the electrochemical behaviour of lscf-sdcc.  - iop conference series: materials science and engineering.  1-10. 

siti mariam daud, wan ramli wan daud, mimi hani abu bakar, byung hong kim, mahendra roa somalu, jamaliah md jahim, andanastuti muchtar, mostafa ghasemi.  (2019).  a comparison of long-term fouling performance by zirconia ceramic filter and cation exchange in microbial fuel cells.  - international journal of biodeterioration & biodegradation.  . 

nor fatina raduwan, s.a. muhammed ali, mustafa anwar, andanastuti muchtar, mahendra rao somalu.  (2019).  effect of ball milling time on the properties of nickel oxide-samarium-doped cerium composite anodes for solid oxide fuel cells.  - international journal of materials and product technology.  16-254. 

nurul akidah baharuddin, andanastuti muchtar, mahendra rao somalu, noor shieela kalib, nor fatina raduwan.  (2019).  synthesis and characterization of cobalt-free srfe0·8ti0·2o3-d cathode powders synthesized through combustion method for solid oxide fuel cells.  - international journal of hydrogen energy.  30682-30691. 

isyraf aznam, joelle mah chia wen, andanastuti muchtar, nurul akidah baharuddin, mahendra rao somalu, mariyam jameelah ghazali.  (2019).  kelakuan pengoksidaan keluli tahan karat berferit sus430 dan kesan pemeruapan spesies cr bergas kepada permukaan katod lscf dalam suhu operasi sel fuel oksida pepejal.  - sains malaysiana.  861-869. 

muhammad sufiyan amril, noor faeizah amat, yew hsu zenn, andanastuti muchtar, mariyam jameelah ghazali.  (2019).  influences of oral environment on natural enamel and zirconia crown: a short review.  - journal of advanced research in fluid mechanics and thermal sciences.  156-162. 

isyraf aznam, joelle chia wen mah, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali.  (2019).  review on oxidation behavior and chromium volatilization of fe-cr-based interconnects at high operation temperatures of solid oxide fuel cells.  - journal of advanced research in fluid mechanics and thermal sciences.  148-155. 

muhammed ali s. a., mustafa anwar, nor fatina raduwan, andanastuti muchtar, mahendra rao somalu.  (2018).  optical, mechanical and electrical properties of lscf-sdc composite cathode prepared by sol-gel assisted rotary evaporation technique.  - journal of sol-gel science and technology.  . 

fathie kundie, che husna azhari, andanastuti muchtar, zainal arifin ahmad.  (2018).  effects of filler size on the mechanical properties of polymer-filled dental composites: a review of recent developments.  - journal of physical science.  . 

mustafa anwar, muhammed ali s.a., nurul akidah baharuddin, nor fatina raduwan, andanastuti muchtar, mahendra rao somalu.  (2018).  structural, optical and electrical properties of ce0.8sm0.2-xerxo2-d (x=0-0.2) co-doped ceria electrolytes.  - ceramics international.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2018).  pengoptimuman parameter pengacuan suntikan terhadap ketumpatan jasad anum untuk komposit aloi titanium-wolastonit.  - sains malaysiana.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi, mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel hydroxyapatite composite.  - plos one.  1-17. 

chuin hao chin, andanastuti muchtar, che husna azhari, masfueh razali & mohamed aboras.  (2018).  improvement of colloidal stability in colloidal processing for highly translucent, nanosized zirconia.  - sains malaysiana.  . 

abdullah abdul samat, abdul azim jais, mahendra rao somalu, nafisah osman, andanastuti muchtar, kean long lim.  (2018).  electrical and electrochemical characteristics of la0.6sr0.4coo3-d cathode materials synthesized by a modified citrate-edta sol-gel method assisted with activated carbon for proton-conducting ....  - journal of sol-gel science and technology.  . 

chuin hao chin, andanastuti muchtar, che husna azhari, masfueh razali & mohamed aboras.  (2018).  influences of the processing method and sintering temperature on the translucency of polycrystalline yttria-stabilized tetragonal zirconia for dental applications.  - ceramics international.  . 

noor shieela kalib, andanastuti muchtar, mahendra rao somalu, ahmad kamal ariffin mohd ihsan, nurul ashikin mohd nazrul aman, nurul akidah baharuddin.  (2018).  factors influencing thermal stress development in solid oxide fuel cells.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

nur wardah norman, mahendra rao somalu, andanastuti muchtar.  (2018).  a short review on the proton conducting electrolytes for solid oxide fuel cell applications.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

siti mariam daud, wan ramli wan daud, byung hong kim, mahendra rao somalu, mimi hani abu bakar, andanastuti muchtar, jamaliah md jahim, swee su lim, in seop chang.  (2018).  comparison of performance and ionic concentration gradient of two chamber microbial fuel cell using ceramic membrane (cm) and cation exchange membrane (cem) as separators.  - electrochimica acta.  365-376. 

abdullah abdul samat, shazana mohd senari, mahendra rao somalu, andanastuti muchtar, oskar hasdinor hassan, nafisah osman.  (2018).  heat treatment effect on the phase and morphology of nio-bczy prepared by an evaporation and decomposition of solution and suspension method.  - sains malaysiana.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi , mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel-hydroxyapatite composite.  - plos one.  . 

noor faeizah amat, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali and norziha yahaya.  (2018).  preparation of presintered zirconia blocks for dental restorations through colloidal dispersion and cold isostatic pressing.  - ceramics international.  6409-6416. 

isyraf aznam, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali, joelle chia wen mah, nurul akidah baharuddin.  (2018).  interconnect development for solid oxide fuel cell application.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

isyraf aznam, joelle chia wen mah, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali..  (2018).  a review of key parameters for effective electrophoretic deposition in the fabrication of solid oxide fuel cells.  - journal of zhejiang university: science a.  . 

wan nor anasuhah wan yusoff, nur wardah norman, abdullah abdul samat, mahendra rao somalu, andanastuti muchtar, nurul akidah baharuddin.  (2018).  fabrication process of cathode materials for solid oxide fuel cells.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

nor fatina raduwan, andanastuti muchtar, mahendra rao somalu, nurul akidah baharuddin, muhammed ali sa.  (2018).  challenges in fabricating solid oxide fuel cell stacks for portable applications: a short review.  - international journal of integrated engineering.  . 

nurul ashikin mohd nazrul aman, andanastuti muchtar, mahendra rao somalu, masli irwan rosli, nurul akidah baharuddin, noor shieela kalib.  (2018).  a short review on the modeling of solid-oxide fuel cells by using computational fluid dynamics: assumptions and boundary conditions.  - international journal of integrated engineering.  . 

noor faeizah amat, shari lawuo raji, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali, norziha yahaya.  (2018).  influence of presintering parameters on the mechanical properties of presintered dental zirconia block.  - international journal of integrated engineering.  . 

siti fairus mohammad, sufizar ahmad, hamimah abdul rahman, andanastuti muchtar, khalid saluiman abdallah.  (2018).  morphological and physical behaviour on the sm0.5sr0.5coo3-s/sm0.2 ce0.8o1.9 incorporation with binary carbonate as potential cathode materials for sofc.  - key engineering materials.  . 

nurul ashikin mohd nazrul aman, andanastuti muchtar, mahendra rao somalu, masli irwan rosli, noor shieela kalib.  (2018).  overview of computational fluid dynamics modelling in solid oxide fuel cell.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

abdullah abdul samat, wan nor anasuhah wan yusoff, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar, nafisah osman.  (2018).  electrochemical performance of sol-gel derived la0.6sr0.4coo3-d cathode material for proton-conducting fuel cell: a comparison between simple and advanced cell fabrication techniques.  - processing and application of ceramics.  . 

muhammed ali, s.a, anwar, m., baharuddin, n.a., somalu, m.r. muchtar, a..  (2018).  enhanced electrochemical performance of lscf cathode through selection of optimum fabrication parameters.  - journal of solid state electrochemistry.  263-273. 

nurul akidah baharuddin, andanastuti muchtar, mahendra rao somalu, mustafa anwar, muhammed ali shaikh abdul kader abdul hameed, joelle mah.  (2018).  effects of sintering temperature on the structural and electrochemical properties of srfe0.5ti0.5o3-d perovskite cathode.  - international journal of applied ceramic technology.  338-348. 

s.a.muhammed ali, mustafa anwar, nurul ashikin, andanastuti muchtar, mahendra rao somalu.  (2018).  influence of oxygen ion enrichment on optical, mechanical, and electrical properties of lscf perovskite nanocomposite.  - ceramics international.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2017).  rheological properties of titanium alloy ti6al4v wollastonite w composite using palm stearin as based binder.  - journal of mechanical engineering.  87-96. 

mohadeseh seyednezhad, armin rajabi, andanastuti muchtar, mahendra rao somalu, poorya ooshaksaraei.  (2017).  effect of compaction pressure on the performance of a non-symmetrical nio-sdc/sdc composite anode fabricated by conventional furnace.  - journal of asian ceramic societies.  77-81. 

joelle c.w. mah, andanastuti muchtar, mahendra r. somalu, mariyam j. ghazali, jarot raharjo.  (2017).  formation of sol-gel derived (cu,mn,co)3o4 spinel and its electrical properties.  - ceramics international.  7641-7646. 

mariyam jameelah ghazali, ahmad firdaus shamsul baharin, juyana a wahab, andanastuti muchtar.  (2017).  erosive wear resistance of dimpled ceramic coatings on mild steels.  - industrial lubrication and tribology.  155-159. 

mustafa anwar, muhamed ali s.a, abdalla m. abdalla, mahendra somalu, andanastuti muchtar.  (2017).  effect of sintering temperature on the microstructure and ionic conductivity of ce0.8sm0.1ba0.1o2-x electrolyte.  - processing and application of ceramics.  67-74. 

s.a. muhammed ali, mustafa anwar, abdalla m. abdalla, mahendra rao somalu, andanastuti muchtar.  (2017).  ce0.80sm0.10ba0.05er0.05o2-d multi-doped ceria electrolyte for intermediate temperature solid oxide fuel cells.  - ceramics international.  1265-1271. 

nurul akidah baharuddin, andanastuti muchtar,mahendra rao somalu, mohadeseh seyednezhad.  (2017).  influence of mixing time on the purity and physical properties of srfe0.5ti0.5o3-d powders produced by solution combustion.  - powder technology.  382-388. 

joelle c.w. mah, andanastuti muchtar, mahendra rao somalu, mariyam j. ghazali.  (2017).  metallic interconnects for solid oxide fuel cell: a review on protective coating and deposition techniques.  - international journal of hydrogen energy.  9219-9229. 

nurul akidah baharuddin, andanastuti muchtar, mahendra rao somalu.  (2017).  short review on cobalt-free cathodes for solid oxide fuel cells.  - international journal of hydrogen energy.  9149-9155. 

nidal wanis elshereksi, mariyam jameelah ghazali, andanastuti muchtar & che husna azhari.  (2017).  review of titanate coupling agents and their application for dental composite fabrication.  - dental materials journal.  539-552. 

lily siong mahmud, andanastuti muchtar, mahendra rao somalu, abdul azim jais.  (2017).  processing of composites based on nio, samarium-doped ceria and carbonates (nio-sdcc) as anode support for solid oxide fuel cells.  - processing and application of ceramics.  206-212. 

muhammed ali s.a., mustafa anwar, mahendra rao somalu, andanastuti muchtar.  (2017).  enhancement of the interfacial polarization resistance of la0.6sr0.4co0.2fe0.8o3-d cathode by microwave-assisted combustion method.  - ceramics international.  4647-4654. 

muhammad hidayat muhamad daud, yew hsu zenn, jasmina qamaruz zaman, , norziha yahaya, , andanastuti muchtar,.  (2017).  evaluation of shear bond strength of a novel nano-zirconia and veneering ceramics.  - ceramics international.  1272-1277. 

nidal w. elshereksi, mariyam jameelah ghazali, andanastuti muchtar, che husna azhari.  (2017).  studies on the effects of titanate and silane coupling agents on the performance of poly (methyl methacrylate)/barium titanate denture base nanocomposites.  - journal of dentistry.  121-132. 

nurul akidah baharuddin, andanastuti muchtar, mahendra rao somalu.  (2017).  preparation of srfe0.5ti0.5o3-d perovskite-structured ceramic using the glycine-nitrate combustion technique.  - materials letters.  197-201. 

jarot raharjo, sa muhammed ali, oka pradipta arjasa, agustanhakri bakri, damisih, eniya listiani dewi, andanastuti muchtar, mahendra rao somalu.  (2017).  synthesis and characterization of uniform-sized cubic ytterbium scandium co-doped zirconium oxide (1yb10scsz) nanoparticles by using basic amino acid as organic precursor.  - international journal of hydrogen energy.  9274-9283. 

leong chee huan, andanastuti muchtar, tan chou yong, masfueh razali & chin chuin hao.  (2017).  sinteran hidroksiapatit dalam atmosfera nitrogen untuk peningkatan sifat mikrokekerasan.  - sains malaysiana.  1635-1640. 

lily siong mahmud, andanastuti muchtar, mahendra rao somalu.  (2017).  challenges in fabricating planar solid oxide fuel cells: a review.  - renewable & sustainable energy reviews.  105-116. 

noor faeizah amat, andanastuti muchtar, mariyam jameelah ghazali and norziha yahaya.  (2017).  effect of ph of suspension and mechanical treatment on nanosized zirconia dispersion.  - journal of mechanical engineering.  10-19. 

mahendra r. somalu, andanastuti muchtar, and nigel p. brandon.  (2017).  properties of screen-printed nickel/scandia-stabilized-zirconia anodes fabricated using rheologically optimized inks during redox cycles.  - journal of materials science.  7175-7185. 

mahendra r. somalu, andanastuti muchtar, wan ramli wan daud, nigel p. brandon.  (2017).  screen-printing inks for the fabrication of solid oxide fuel cell films: a review.  - renewable and sustainable energy reviews.  426-439. 

abdul azim jais, s.a. muhammed ali, mustafa anwar, mahendra rao somalu, andanastuti muchtar, wan nor roslam wan isahak, chou yong tan, ramesh singh, nigel p. brandon.  (2017).  enhanced ionic conductivity of scandia-ceria-stabilized-zirconia (10sc1cesz) electrolyte synthesized by the microwave-assisted glycine nitrate process.  - ceramics international.  8119-8125. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad & jaharah a. ghani.  (2017).  kesan suhu pensinteran terhadap sifat mekanik dan mikrostruktur alumina zirkonia yang difabrikasi dengan kaedah pengacuan suntikan seramik.  - sains malaysiana.  1979-1986. 

chin chuin hao, andanastuti muchtar, che husna azhari, masfueh razali, mohamed aboras.  (2016).  fabrication of y-tzp for dental crowns applications by combining slip casting and cold isostatic pressing.  - malaysian journal of analytical sciences.  642-650. 

nurul akidah baharuddin, andanastuti muchtar, mahendra rao somalu, muhammed ali s.a., hamimah abd. rahman.  (2016).  influence of sintering temperature on the polarization resistance of la0.6sr0.4co0.2fe0.8o3-d-sdc carbonate composite cathode.  - ceramics-silikaty.  115-121. 

chin chuin hao, andanastuti muchtar, che husna azhari, masfueh razali, mohamed aboras.  (2016).  influence of sintering temperature on translucency of yttria-stabilized zirconia for dental crown applications.  - jurnal teknologi.  13-18. 

s. mahalingam, h. abdullah, i. ashaari, s. shaari, a. muchtar.  (2016).  influence of heat treatment process in in2o3-mwcnts as photoanode in dsscs.  - ionics.  711-719. 

s. mahalingam, h. abdullah, s. shaari, a. muchtar.  (2016).  morphological and electron mobility studies in nanograss in2o3 dssc incorporating multi-walled carbon nanotubes.  - ionics.  1985-1997. 

mohamed aboras, andanastuti muchtar, che husna azhari, norziha yahaya, chin chuin hao.  (2016).  influence of processing on mechanical properties of 3y-tzp for dental applications.  - jurnal teknologi.  7-12. 

c.k. ng, s. ramesh, c.y. tan, c.y. ching, n. lwin, a. muchtar..  (2016).  effect of manganese oxide on the densification and properties of ceria-doped scandia stabilized zirconia.  - journal of ceramic processing research.  443-447. 

nurul akidah baharuddin, andanastuti muchtar, mahendra rao somalu, abu bakar sulong, huda abdullah.  (2016).  pengaruh suhu sinter terhadap prestasi elektrokimia katod komposit sel bahan api oksida pepejal (sofc) lscf-sdcc.  - sains malaysiana.  459-465. 

s.mahalingam, h.abdullah, i.ashaari, s.shaari and a.muchtar.  (2016).  optical, morphology and electrical properties of in2o3 incorporating acid-treated single-walled carbon nanotubes based dssc.  - journal of physics d: applied physics.  075601. 

m.j. ghazali, s.m. forghani, n. hassanuddin, a. muchtar, a.r.daud.  (2016).  comparative wear study of plasma sprayed tio2 and al2o3-tio2 on mild steels.  - tribology international.  681-686. 

f.d. chong, c.y. tan, r. singh, a. muchtar, m.r. somalu, c.k. ng, b.k. yap, y.c. teh, y.m. tan.  (2016).  effect of manganese oxide on the sinterability of 8 mol% yttria-stabilized zirconia.  - materials characterization.  331-336. 

lily siong mahmud, andanastuti muchtar, mahendra rao somalu.  (2016).  influence of sintering temperature on nio-sdcc anode for low-temperature solid oxide fuel cells (lt-sofcs).  - ceramics-silikaty.  317-323. 

mustafa anwar, andanastuti muchtar, mahendra rao somalu.  (2016).  effects of various co-dopants and carbonates on the properties of doped ceria-based electrolytes: a brief review.  - international journal of applied engineering research.  9921-9928. 

abdullah abdul samat, mahendra rao somalu, andanastuti muchtar, oskar hasdinor hassan, nafisah osman.  (2016).  lsc cathode prepared by polymeric complexation method for proton-conducting sofc application.  - journal of sol-gel science and technology.  382-393. 

abdullah abdul samat, mahendra rao somalu, andanastuti muchtar, nafisah osman.  (2016).  preparation of lanthanum strontium cobalt oxide powder by a modified sol-gel method.  - malaysian journal of analytical sciences.  1458-1466. 

shabana p.s. shaikh, mahendra r. somalu, andanastuti muchtar.  (2016).  nanostructured cu-cgo anodes fabricated using a microwave-assisted glycine-nitrate process.  - journal of physics and chemistry of solids.  91-99. 

c.k. ng, s. ramesh, c.y. tan, andanastuti muchtar, mahendra rao somalu.  (2016).  microwave sintering of ceria-doped scandia stabilized zirconia as electrolyte for solid oxide fuel cell.  - international journal of hydrogen energy.  14184-14190. 

baharuddin n.a., muchtar a., somalu m.r., sulong a.b., abdullah h..  (2016).  effects of sintering temperature on the electrochemical performance of solid oxide fuel cell (sofc) composite cathode lscf-sdcc.  - sains malaysiana.  459-465. 

tatt t.k., muhamad n., muchtar a., sulong a.b., cherng n.m..  (2016).  influence of sintering parameters on the compressive yield strength of stainless steel foams produced by the space holder method.  - sains malaysiana.  653-658. 

k.h.ng, s.lidiyawati, mahendra rao somalu, andanastuti muchtar, hamimah abdul rahman.  (2016).  influence of calcination on the properties of nickel oxide-samarium doped ceria carbonate (nio-sdcc) composite anodes.  - procedia chemistry.  267-274. 

mohadeseh seyednezhad, armin rajabi, andanastuti muchtar, mahendra rao somalu.  (2016).  nanostructured and nonsymmetrical niosdc sdc composite anode performance via a microwave assisted route for intermediate temperature solid oxide fuel cells.  - materials and manufacturing processes.  1301-1305. 

chuin hao chin , andanastuti muchtar, che husna azhari, masfueh razali, mohamed aboras..  (2015).  optimization of ph and dispersant amount of y-tzp suspension for colloidal stability.  - ceramics international.  9939-9946. 

kai yuan theng, andanastuti muchtar, norziha yahaya and mariyam jameelah ghazali.  (2015).  development of translucent zirconia for dental crown applications.  - asian journal of scientific research.  342-350. 

mahalingam s., abdullah h., shaari s., muchtar a., asshari i..  (2015).  structural, morphological, and electron transport studies of annealing dependent in2o3 dye-sensitized solar cell.  - scientific world journal.  . 

shabana p.s. shaikh, andanastuti muchtar, mahendra r. somalu.  (2015).  a review on the selection of anode materials for solid-oxide fuel cells.  - renewable and sustainable energy reviews.  1-8. 

s.a. muhammed ali, ros emilia rosli, andanastuti muchtar, abu bakar sulong, mahendra rao somalu, edy herianto majlan.  (2015).  effect of sintering temperature on surface morphology and electrical properties of samarium-doped ceria carbonate for solid oxide fuel cells.  - ceramics international.  1323-1332. 

mohadeseh seyednezhad, armin rajabi, andanastuti muchtar, mahendra rao somalu.  (2015).  characterization of it-sofc non-symmetrical anode sintered through conventional furnace and microwave.  - ceramics international.  5663-5669. 

savisha mahalingam, h abdullah, sahbudin shaari, andanastuti muchtar.  (2015).  optimization of swcnts loading for in2o3 based dye-sensitized solar cell application.  - australian journal of basic and applied sciences.  44-47. 

mohamed aboras, andanastuti muchtar, che husna azhari, norziha yahaya, chin chuin hao.  (2015).  improvement of mechanical properties of y-tzp via ceria addition and cold isostatic pressing method.  - jurnal teknologi.  55-59. 

n. mohamad, m.a. mahamood, y.juliana, a.r. jeefferie, a. muchtar, m.i. shueb, m.s. kassim, m.a. azam, y.m.yuhazri, n.mustafa, a.r. toibah, t.r. sahroni dan q. ahsan.  (2014).  functionalisation of ethylene-propylene copolymer by melt grafting of maleic anhydride using a high shear internal mixer.  - materials research innovations.  36-42. 

cheah g.p., tan c.y., yusof f., muchtar a., lim k.f., yap b.k..  (2014).  the effects of sintering behavior of zirconiadoped hydroxyapatite for clinical applications.  - materials research innovations.  151-154. 

theng kai yuan, andanastuti muchtar, norziha yahaya, mariyam jameelah ghazali.  (2014).  review on the translucency of zirconia (y-tzp) ceramics for dental crown applications.  - australian journal of basic and applied sciences.  252-257. 

m. ahmadrezaei, s. a. muhammed ali, a. muchtar, c.y.tan , m.r. somalu.  (2014).  thermal expansion behavior of the bo0.2sr0.8co0.8fe0.2o3-8 (bscf) with sm0.2ce0.8o1.9.  - ceramics-silikaty.  46-49. 

lim kok fong, andanastuti muchtar, rusnah mustaffa, tan chou yong.  (2014).  synthesis and characterization of hydroxyapatite-zirconia composites for dental applications.  - asian journal of scientific research.  7(4):609-615. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2014).  fabrication of zirconia-toughened alumina parts by powder injection molding process: optimized processing parameters.  - ceramics international.  40: 273-280. 

s.m. forghani, mj ghazali, a. muchtar, a.r. daud.  (2014).  mechanical properties of plasma sprayed nanostructured tio2 coatings on mild steel.  - ceramics international.  40 (2014):7049-7056. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2014).  binder removal via a two-stage debinding process for ceramic injection molding parts.  - ceramics international.  40(2014):2819-2824. 

nurul akidah baharuddin, hamimah ab rahman, andanastuti muchtar, abu bakar sulong & huda abdullah.  (2014).  kesan masa pengendapan dan saiz elektrod pembalik dalam penghasilan katod komposit lscf-sdc karbonat sel fuel oksida pepejal.  - sains malaysiana.  43(4): 595-601. 

m. i. ramli, a. b. sulong, n. muhamad, a. muchtar and a. arifin.  (2014).  stainless steel 316l hydroxyapatite composite via powder injection moulding: rheological and mechanical properties characterisation.  - material research innovation.  100-104. 

leong chee huan, andanastuti muchtar, tan chou yong, masfueh razali, noor faeizah amat.  (2014).  sintering of hydroxyapatite/yttria stabilized zirconia nanocomposites under nitrogen gas for dental materials.  - advances in materials science and engineering.  Art no.367267. 

dedikarni panuh, andanastuti muchtar, norhamidi muhamad, edy herianto majlan, wan ramli wan daud.  (2014).  elektrolit dwi lapisan sm0.2ce0.8o1.90 (sdc)/ y0.25bi0.75o1.5 (ysb) untuk sel fuel oksida pepejal bersuhu sederhana.  - sains malaysiana.  1769-1774. 

nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar, and che h. azhari.  (2014).  perspectives for titanium-derived fillers usage on denture base composite construction: a review article.  - advances in materials science and engineering.  1-13. 

m. m. aboras, k. y. theng, a. muchtar, c. h. azhari, n. yahaya.  (2014).  a review of the low-temperature degradation of dental zirconia.  - applied mechanics and materials.  85-88. 

noraiham mohamad, juliana yaakub, jeefferie abd razak, mohd yuhazri yaakob, mohammed iqbal shueb, andanastuti muchtar.  (2014).  effects of epoxidized natural rubber (enr-50) and processing parameters on the properties of nr/epdm blends using response surface methodology.  - journal of applied polymer science.  8777-8784. 

baharuddin n.a., rahman h.a., muchtar a., sulong a.b., abdullah h..  (2014).  effects of deposition time and counter-electrode size on the fabrication of lscf-sdc carbonate composite cathode for sofc.  - sains malaysiana.  595 - 601. 

dedikarni panuh, andanastuti muchtar, norhamidi muhamad, edy herianto majlan, wan ramli wan daud.  (2014).  fabrication of thin ag-ysb composite cathode film for intermediate temperature solid oxide fuel cells.  - composites part b-engineering.  58 (2014): 193-198. 

noor faeizah amat, andanastuti muchtar, mariyam jameelah ghazali, norziha yahaya.  (2014).  suspension stability and sintering influence on yttria-stabilized zirconia fabricated by colloidal processing.  - ceramics international.  40(4):5413-5419. 

muhammed ali s. a., andanastuti muchtar, abu bakar sulong, norhamidi muhamad, edy herianto majlan.  (2013).  influence of sintering temperature on the power density of samarium-doped-ceria carbonate electrolyte composites for low-temperature solid oxide fuel cells.  - ceramics international.  39(5):5813-5820. 

n.h.n. yusoff, m.j. ghazali, m.c. isa, a.r. daud, a. muchtar.  (2013).  effects of powder size and metallic bonding layer on corrosion behaviour of plasma-sprayed al2o3-13% tio2 coated mild steel in fresh tropical seawater.  - ceramics international.  39(3):2527-2533. 

nurul akidah baharuddin, hamimah abd. rahman, andanastuti muchtar, abu bakar sulong, huda abdullah.  (2013).  development of lanthanum strontium cobalt ferrite composite cathodes for intermediate- low temperature solid oxide fuel cells.  - journal of zhejiang university-science a.  11-24. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad and jaharah a. ghani.  (2013).  pencirian keseragaman campuran dan sifat reologi serbuk alumina-zirkonia untuk pengacuan suntikan seramik.  - sains malaysiana.  42(9):1311-1317. 

hamimah abd. rahman, andanastuti muchtar, norhamidi muhamad, huda abdullah.  (2013).  la0.6sr0.4co0.2fe0.8o3-sdc carbonate composite cathodes for low-temperature solid oxide fuel cells.  - materials chemistry and physics.  141:752-757. 

mojgan ahmadrezaei, andanastuti muchtar, norhamidi muhamad, c.y. tan, edy herianto majlan.  (2013).  electrochemical and microstructural characteristics of nanoperovskite oxides ba0.2sr0.8co0.8fe0.2o3-d (bscf) for solid oxide fuel cells.  - ceramics international.  39(1):439-444. 

s.m. forghani, m.j. ghazali, a. muchtar, a.r. daud, n.h.n. yusoff, c.h. azhari.  (2013).  effects of plasma spray parameters on tio2-coated mild steel using design of experiment (doe) approach.  - ceramics international.  39(3):3121-3127. 

tan koon tatt, norhamidi muhamad, andanastuti muchtar, abu bakar sulong, heng shye yunn.  (2012).  rheological behaviour of novel feedstock for manufacturing porous stainless steel via (mim)-psh.  - jurnal teknologi.  59:187-191. 

mohd najib redzuan lee, andanastuti muchtar, shahrum abdullah & khairul anwar mastor.  (2012).  malaysian students` manifestation of cultural adaptation and resilience during their sojourn in germany.  - asian social science.  8(16):96-103. 

n.h.n. yusoff, m.j. ghazali, m.c. isa, a.r. daud, a. muchtar, s.m. forghani.  (2012).  optimization of plasma spray parameters on the mechanical properties of agglomerated al2o3-13%tio2 coated mild steel.  - materials & design.  39:504-508. 

hamimah abd rahman, andanastuti muchtar, syaharizan haron, norhamidi muhamad & huda abdullah.  (2012).  kesan parameter pemprosesan dan bahan tambah terhadap pengendapan elektroforetik filem lscf6428.  - sains malaysiana.  41(2): 237-244. 

hamimah abdul rahman, andanastuti muchtar, norhamidi muhamad, huda abdullah.  (2012).  structure and thermal properties of la0.6sr0.4co0.2fe0.8o3d-sdc carbonate composite cathodes for intermediate- to low-temperature solid oxide fuel cells.  - ceramics international.  38: 1571-1576. 

dedikarni panuh, andanastuti muchtar*, norhamidi muhamad & wan ramli wan daud.  (2012).  kesan rawatan haba terhadap mikrostruktur katod berliang ag2o3-bi2o3 di atas substrat keluli kalis karat yang disediakan dengan kaedah pengecatan sluri.  - sains malaysiana.  41(1): 121-127. 

jarot raharjo, andanastuti muchtar*, wan ramli wan daud, norhamidi muhamad & edy herianto majlan.  (2012).  pencirian fizikal dan terma komposit seramik elektrolit sdc-(li/na)2co3 (physical and thermal characterisations of sdc-(li/na)2co3 electrolyte ceramic composites).  - sains malaysiana.  41(1): 95-102. 

noor faeizah amat, andanastuti muchtar, norziha yahaya, mariyam jameelah ghazali.  (2012).  a review of zirconia as a dental restorative material.  - australian journal of basic and applied sciences.  6(12):9-13. 

mohd ikram ramli, abu bakar sulong, amir arifin, andanastuti muchtar, norhamidi muhamad.  (2012).  powder injection molding of ss316l/ha composite: rheological properties and mechanical properties of the green part.  - journal of applied sciences research.  8(11):5317-5321. 

n.h.n. yusoff, m.j. ghazali, m.c. isa, a. muchtar, s. m. forghani.  (2011).  effect of particle size and bonding layer on plasma sprayed al 2o 3-13%tio 2 coatings.  - international journal of mechanical and materials engineering.  6(3):385-390. 

m.z. selamat, j. sahari, n. muhamad and a. muchtar.  (2011).  the effects of thickness reduction and particle sizes on the properties graphite - polypropylene composite.  - international journal of mechanical and materials engineering.  6(2):194-200. 

noraiham mohamad, andanastuti muchtar, mariyam jameelah ghazali, dahlan hj. mohd and che husna azhari.  (2010).  correlation of filler loading and silane coupling agent on the physical characteristics of epoxidized natural rubber-alumina nanoparticles composites.  - journal of elastomers and plastics.  . 

s. abdullah, e. adril, a. muchtar and a.k. ariffin.  (2010).  friction reduction in compressed natural gas direct injection engine using piston rings with diffusion chromium coating.  - journal of applied sciences.  10(6):462-470. 

mohamad, n; muchtar, a; ghazali, mj; mohd, dhj; azhari, ch.  (2010).  epoxidized natural rubber-alumina nanoparticle composites: optimization of mixer parameters via response surface methodology.  - journal of applied polymer science.  115(1):183-189. 

ahmad, s; muhamad, n; muchtar, a; sahari, j; jamaludin, kr; ibrahim, mhi; nor, nhm; murtadhahadi.  (2010).  characterisation of titanium foams sintered at different temperatures prepared by the slurry method.  - sains malaysiana.  39(1):77-82. 

s. ahmad, n. muhamad, a. muchtar, j. sahari , m.h.i. ibrahim, k.r. jamaludin and n.h.m. nor.  (2010).  development and characterization of titanium alloy foams.  - international journal of mechanical and materials engineering (ijmme).  Vol. 5, No.2, 244-250. 

andanastuti muchtar, rosadah abdul majid.  (2009).  nurturing creativity in young children for heightened engineering prowess.  - european journal of social sciences.  8(3):406-412. 

a. muchtar, m.z. omar, a. hunger.  (2009).  lessons from the joint ukm-ude (malaysia-germany) student mobility programs.  - european journal of social sciences.  8(3):413-419. 

adril e., abdullah s., ariffin a.k., muchtar a., omar k..  (2009).  comparative study of characteristic of lubricant oils in gasoline and compressed natural gas engines.  - european journal of scientific research.  30(2):282-293. 

miloud souiyah, a. muchtar, abdulnaser alshoaibi and a.k. ariffin.  (2009).  finite element analysis of the crack propagation for solid materials.  - american journal of applied sciences.  6(7):1396-1402. 

abdullah s., rahmat r.a.a.o.k., zaharim a., muhamad n., deros b.m., kofli n.t., abdullah m., mohd. tahir m., muchtar a., azhari c.h..  (2009).  implementing continual review of programme educational objectives and outcomes for obe curriculum based on stakeholders` input.  - european journal of scientific research.  29(1):89-99. 

noorashrina a. hamid, andanastuti muchtar, wan ramli wan daud & norhamidi muhamad.  (2009).  pencirian mikrostruktur katod la-sr-co-fe-o bagi sel fuel oksida pepejal bersuhu sederhana (it-sofc).  - sains malaysiana.  38(6):857-861. 

noraiham mohamad, andanastuti muchtar, mariyam jameelah ghazali, dahlan hj mohd, che husna azhari.  (2008).  the effect of filler on epoxidised natural rubber-alumina nanoparticles composites.  - european journal of scientific research.  24(4):538-547. 

miloud souiyah, abdulnaser alshoaibi, a. muchtar, a.k. ariffin.  (2008).  finite element model for linear-elastic mixed mode loading using adaptive mesh strategy.  - journal of zhejiang university science a.  9(1):32-37. 

rusnah mustaffa, idris besar & andanastuti muchtar.  (2008).  development of a synthetic bone scaffold using porous hydroxyapatite for bone repair.  - the medical journal of malaysia.  63(A):95-96.