wang, l., jalar, a. & dan, l.  (2023).  dynamic precipitation and dynamic recrystallization behaviors of mg-gd-nd-zr magnesium alloy during thermal compression deformation.  - journal of materials research and technology.  7634-7648. 

saraswathy supramaniam, maria abu bakar, a. atiqah, azman jalar, mohd zulhakimi ab. razak.  (2023).  moisture content and early corrosion detection of cu wire bonding in a semiconductor package.  - journal of failure analysis and prevention.  2362-2369. 

maria abu bakar, mohamad solehin mohamed sunar, azman jalar, a atiqah, fakhrozi che ani, ibrahym ahmad, zol effendi zolkefli.  (2023).  effect of sn plating thickness on wettability, solderability, and electrical connections of electronic lead connectors for surface mount technology applications.  - sains malaysiana.  3247-3258. 

naif h m al-hardan, muhammad azmi abdul hamid, azman jalar, mohd firdaus-raih.  (2023).  unleashing the potential of gallium oxide: a paradigm shift in optoelectronic applications for image sensing and neuromorphic computing applications.  - materials today physics.  1-24. 

n. a. azra, a. atiqah, h. fadhlina, m. a. bakar, a. jalar, r. a. ilyas, j. naveen, f. a. sabaruddin, k. k. lim, m. asrofi.  (2023).  oil-palm based nanocellulose reinforced thermoplastic polyurethane for plastic encapsulation of biomedical sensor devices: water absorption, thickness swelling and density properties.  - applied science and engineering progress.  1-9. 

naif h. al-hardan, mohd firdaus-raih, muhammad azmi abdul hamid, azman jalar.  (2023).  real-time viral detection through electrolyte-gated field effect transistors: possibility of rapid covid-19 detection.  - critical reviews in solid state and materials sciences.  194-220. 

n.a. azra, a. atiqah, a. jalar, g. manar, a.b.m. supian, r.a. ilyas.  (2023).  sustainable substrate tin oxide/nanofibril cellulose/thermoplastic starch: dimensional stability and tensile properties.  - journal of materials research and technology.  99-108. 

linghao wang, azman jalar, longhong dan.  (2023).  effect of nd on microstructure and mechanical properties of mg-7gd-0.5zr alloy.  - journal of alloys and compounds.  1-14. 

ensaf mohammed alkhalqi, muhammad azmi abdul hamid, naif h. alhardan, lim kar keng, azman jalar.  (2022).  magnesium doped zno nanorod electrolyte-insulator-semiconductor (eis) sensor for detecting organic solvents..  - ieee sensors journal.  11783-11790. 

n.ismail, a.atiqah, a.jalar, m.a.bakar, r.a.a.rahim, a.g.ismail, a.a.hamzah, l.k.keng.  (2022).  a systematic literature review: the effects of surface roughness on the wettability and formation of intermetallic compound layers in lead-free solder joints.  - journal of manufacturing processes.  68-85. 

fateh amera mohd yusoff, maria abu bakar, azman jalar.  (2022).  temperature-induced thickness reduction of micromechanical properties of sn-0.7cu solder alloy.  - materiali in tehnologije, materials and technology.  373-379. 

adlil aizat ismail, maria abu bakar, abang annuar ehsan, azman jalar, erwan basiron, fakhrozi che ani.  (2022).  cardinal and ordinal directions approach in investigating arrayed solder joints crack propagation of ball grid array semiconductor packages.  - ieee transactions on components packaging and manufacturing technology.  1492-1501. 

adlil aizat ismail, maria abu bakar, abang annuar ehsan, azman jalar, john burke, zol effendi zolkefli, erwan basiron.  (2022).  effect of heat shield locations on rework-induced thermal management in ball grid array solder joint.  - scientific reports.  1-12. 

maria abu bakar, atiqah mohd afdzaluddin, azman jalar.  (2022).  review on corrosion in electronic packaging trends of collaborative between academia-industry.  - sustainability.  1-33. 

ensaf mohammed. al-khalqi, muhammad azmi abdul hamid, naif h. al-hardan, lim kar keng, azman jalar.  (2022).  magnesium-doped zno nanorod electrolyte insulator semiconductor (eis) sensor for detecting calcium ions.  - journal of materials science: materials in electronics.  1618-1630. 

saraswathy supramaniam, maria abu bakar, azman jalar.  (2022).  early corrosion detection of cu-ag wedge bonding in semiconductor package.  - journal of failure analysis and prevention.  2317-2325. 

abdul a omar, azman jalar, maria a bakar, khirullah a hamid.  (2022).  sulfur ingression on encapsulated leadframe of discrete semiconductor package.  - ieee transactions on components, packaging and manufacturing technology.  544-550. 

abdul a. omar, azman jalar, khirullah a.hamid.  (2022).  evolution of discrete semiconductor copper wedge bond in biased temperature humidity chamber.  - jurnal teknologi.  129-135. 

hassan basher ,muhammad nubli zulkifli ,azman jalar , michael daenen.  (2022).  temperature cycling test on ultrasonic aluminum bonds and conductive adhesive of copper indium gallium (di)selenide (cigs) thin-film photovoltaic solar panel.  - ieee journal of photovoltaics.  1418-1427. 

fateh amera mohd yusoff, azman jalar.  (2022).  influence of thermomechanical processing on micromechanical properties of sn-0.7cu solder alloy via nanoindentation approach.  - jurnal teknologi.  25-31. 

nur farisa nadia mohmad lehan, wan yusmawati wan yusoff, ku zarina ku ahmad, norliza ismail, azuraida amat, nor azlian abdul manaf, mohamad faizal abdullah, azman jalar, irman abdul rahman, emee marina salleh.  (2022).  influence of gamma radiation on eutectic phase area and hardness properties of sac305 solder.  - jurnal teknologi.  113-118. 

mohamad solehin mohamed sunar, maria abu bakar, azman jalar, mohamad riduwan ramli, fakhrozi che ani.  (2022).  effect of alloy particle size and stencil aperture shape on solder printing quality.  - microelectronics international.  81-90. 

fateh amera mohd yusoff, maria abu bakar, azman jalar.  (2022).  kesan rawatan termomekanik dengan mampatan tunggal terhadap mikrostruktur dan sifat mikromekanik aloi pateri sn-0.7cu.  - sains malaysiana.  3775-3784. 

hassan basher, muhammad nubli zulkifli, mohd khairil rahmat, muhammad ghazali abdul rahman, azman jalar, michael daenen.  (2021).  bondability of ultrasonic aluminum bonds on the molybdenum (de) selenide and molybdenum of back contact layer of copper indium gallium (de)selenide cigs thin film photovoltaic solar panel.  - solar energy.  516-522. 

ensaf mohammed. al-khalqi, muhammad azmi abdul hamid, roslinda shamsudin, naif h. al-hardan, lim kar keng, azman jalar.  (2021).  zinc oxide nanorods electrolyte insulator semiconductor sensors for enhanced 2-methoxythanol selectivity.  - ieee sensors journal.  6234-6240. 

naif h. al-hardan, muhammad azmi abdul hamid, lim kar keng, ensaf mohammed al-khalqi, azman jalar, wee siong chiu.  (2021).  low-cost fabrication of a ph sensor based on writing directly over parchment-type paper with pencil.  - journal of materials science: materials in electronics.  9431-9439. 

hassan basher , muhammad nubli zulkifli , azman jalar, michael daenen.  (2021).  effect of ultrasonic bonding parameters on the contact resistance and bondability performances of cigs thin film photovoltaic solar panel.  - ieee journal of photovoltaics.  345-353. 

nurul adlin mahadzir, angela amphawan, tendai masunda, p. susthitha menon, azman jalar, maria abu bakar, ahmad ghadafi ismail.  (2021).  tapered waveguide design for mode conversion in mode division multiplexing (mdm).  - optoelectronics and advanced materials rapid communications.  325-331. 

naif h. al-hardan, muhammad azmi abdul hamid, mohd firdaus-raih, lim kar keng, ensaf mohammed al-khalqi, azman jalar.  (2021).  calcium ion-selective electrode based on the facile synthesis of cuo over cu wires.  - journal of materials science: materials in electronics.  1-12. 

norliza ismail, azman jalar, atiqah afdzaluddin, maria abu bakar.  (2021).  electrical resistivity of sn 3.0 ag 0.5cu solder joint with the incorporation of carbon nanotubes.  - nanomaterials and nanotechnology.  1-9. 

syed mohamad mardzukey syed mohamed zain, azman jalar, maria abu bakar, fakhrozi che ani, mohamad riduwan ramli.  (2021).  horizontal crack induced vertical crack formation in epoxy mold compound for electronic packaging.  - journal of microelectronics, electronic components and materials.  261-266. 

a. atiqah, m.n.m ansari, m.s.s. kamal, a. jalar, n.n. afeefah, n. ismail.  (2020).  effect of alumina trihydrate as additive on the mechanical properties of kenaf polyester composite for plastic encapsulated electronic packaging application.  - journal of materials research and technology.  12899-12890. 

azman jalar, maria abu bakar, roslina ismail.  (2020).  temperature dependence of elastic-plastic properties of fine-pitch sac 0307 solder joint using nanoindentation approach.  - metallurgical and materials transactions a-physical metallurgy and material.  1221-1228. 

norliza ismail, azman jalar, wan yusmawati wan yusoff, nur shafiqa safee, ariffin ismail.  (2020).  effect of shock wave on constant load behaviour of pb-free/cnt solder joint.  - sains malaysiana.  3037-3044. 

rabiah al adawiyah ab rahim, muhammad nubli zulkifli, azman jalar, atiqah mohd afdzaluddin, kim siow shyong.  (2020).  effect of isothermal aging and copper substrate roughness on the sac305 solder joint intermetallic layer growth of high temperature storage (hts).  - sains malaysiana.  3045-3054. 

norliza ismail, azman jalar, maria abu bakar, roslina ismail, najib saedi ibrahim.  (2020).  effect of flux functional group for solder paste formulation towards soldering quality of sac305/cnt/cu.  - soldering & surface mount technology.  157-164. 

m. s. rusdi, m. z. abdullah, m. h. h. ishak, m. s. abdul aziz, m. k. abdullah & p. rethinasamy, a. jalar.  (2020).  three-dimensional cfd simulation of the stencil printing performance of solder paste.  - international journal of advanced manufacturing technology.  3351-3359. 

a. s ashikin, g. omar, n. tamaldin, s. jasmee, h. a hamid, a. jalar, f. che ani.  (2020).  thermo-mechanical and adhesion performance of silver-filled conductive polymer composite (sfcp) using thermoplastic polyurethane (tpu) substrate.  - international journal of nanoelectronics and materials.  419-430. 

norliza ismail, azman jalar, maria abu bakar, nur shafiqa safee, wan yusmawati wan yusoff, ariffin ismail.  (2020).  microstructural evolution and micromechanical properties of sac305/cnt/cu solder joint under blast wave condition.  - soldering & surface mount technology.  47-56. 

izhan abdullah, muhammad nubli zulkifli, azman jalar @ jalil, roslina ismail, mohd arrifin ambak.  (2019).  relationship of mechanical and micromechanical properties with microstructural evolution of sn-3.0ag-0.5cu (sac305) solder wire under varied tensile strain rates and temperatures.  - journal of electronic materials.  2826-2839. 

muhammad nubli zulkifli, fuaida harun, azman jalar @ jalil.  (2019).  effect of surface roughness and hardness of leadframe on the bondability of gold wedge bonds.  - microelectronics international.  62-67. 

muhammad nubli zulkifli, azman jalar @ jalil, fuaida harun.  (2019).  effect of conventional and granular capillaries usage on the bondability, reliability, and manufacturability of gold wedge bonds.  - ieee transactions on components packaging and manufacturing technology.  763-769. 

m. a.fatah m. mukhtar, a. abas, m. s. haslinda, f. che ani, azman jalar @ jalil, a. a. saad, m. z. abdullah, r. ismail.  (2019).  effect of different s ac based nanoparticles types on the reflow soldering process of miniaturized component using discrete phase model simulation.  - journal of applied fluid mechanics.  1683-1696. 

hazian mamat, azman jalar, maria abu bakar.  (2019).  characterization on ph-isfet poly bisphenol hydrophobic encapsulation material.  - asm science journal.  65-70. 

norliza ismail, azman jalar, maria abu bakar, roslina ismail, nur shafiqa safee, ahmad ghadafi ismail, najib saedi ibrahim.  (2019).  kesan penuaan sesuhu terhadap sifat mikro kekerasan pempaterian sn-ag-cu/cnt/cu menggunakan pelekukan nano.  - sains malaysiana.  1267-1272. 

izhan abdullah, azman jalar, roslina ismail, maria abu bakar, muhammad nubli zulkifli,emee marina salleh.  (2019).  effect of tensile direction on microstructure evolution of sac305 solder wire.  - asm science journal.  53-59. 

mohd adly rahmat saat, rozaidi rasid, maria abu bakar, azman jalar, emee marina salleh.  (2019).  mechanical properties of pe-pet-ps-pp blends produced by high shear mixing.  - polimery.  676-679. 

wan yusmawati wan yusoff, norliza ismail, nur shafiqa safee, ariffin ismail, azman jalar, maria abu bakar.  (2019).  correlation of microstructural evolution and hardness properties of 99.0sn-0.3ag-0.7cu (sac0307) lead-free solder under blast wave condition.  - soldering & surface mount technology.  102-108. 

maria abu bakar, azman jalar, wan yusmawati wan yusoff, nur shafiqa safee, ariffin ismail, norliza ismail, emee marina salleh, najib saedi ibrahim.  (2019).  kesan gelombang kejutan terhadap sifat mikromekanik sambungan pateri sac 0307/enig menggunakan pendekatan pelekukan nano.  - sains malaysiana.  1273-1279. 

norliza ismail, roslina ismail, azman jalar, ghazali omar, emee marina salleh, norinsan kamil, irman abdul rahman.  (2018).  comparative study of interfacial interaction between aromatic and aliphatic functional group in solder wettability.  - journal of materials science: materials in electronics.  . 

maria abu bakar, azman jalar, mohd zulkifly abdullah, najib saedi ibrahim, mohd ariffin ambak.  (2018).  controlling of intermetallic compound solder interconnection-printed circuit board using nickel coating.  - sains malaysiana.  . 

nor rahafza abdul manap, roslinda shamsudin, mohd norhafsam maghpor, muhammad azmi abdul hamid, azman jalar.  (2018).  adsorption isotherm and kinetic study of gas-solid system of formaldehyde on oil palm mesocarp bio-char: pyrolysis effect.  - journal of environmental chemical engineering.  . 

fakhrozi che ani, azman jalar, abdullah aziz saad, chu yee khor, roslina ismail, zuraihana bachok, mohamad aizat abas, norinsan kamil othman.  (2018).  sac tio2 nano reinforced lead free solder joint characterizations in ultra fine package assembly.  - soldering surface mount technology.  1-13. 

maria abu bakar, azman jalar, mohd zulkifly abdullah, najib saedi ibrahim & mohd ariffin ambak.  (2018).  pengawalan pertumbuhan sebatian antara logam sambungan pateri-papan litar bercetak menggunakan salutan nikel.  - sains malaysiana.  . 

emee marina salleh, norinsan kamil othman & azman jalar.  (2018).  electrochemical migration behaviour of sac305 solder in various concentrations of sodium hydroxide solution.  - sains malaysiana.  . 

f. che ani, a. jalar, r. ismail, z. mustafa, a.a. saad, c.y. khor, n. k. othman, m.y. tura ali, m.a.fatah m.mukhtar, aizat aba.  (2018).  tio2 nanoparticles reinforced lead free 96.5 sn 3.0ag 0.5cu solder paste for ultra fine package assembly in reflow soldering process.  - journal of advanced manufacturing technology.  . 

norliza ismail, azman jalar, maria abu bakar, roslina ismail.  (2018).  kesan penambahan tiubnano karbon terhadap pertumbuhan lapisan sebatian antara logam sistem pateri sn-ag-cu/cu akibat penuaan terma.  - sains malaysiana.  . 

maria abu bakar, azman jalar, roslina ismail.  (2018).  penilaian semula pengukuran kuantitatif stereometri terhadap pertumbuhan sebatian antara logam bagi sambungan pateri.  - sains malaysiana.  . 

f. che ani, a. jalar, a. a. saad, c. y. khor, r. ismail, z. bachok, m. a. abas & n. k. othman.  (2018).  the influence of fe2o3 nano-reinforced sac lead-free solder in the ultra-fine electronics assembly.  - the international journal of advanced manufacturing technology.  . 

izhan abdullah, muhammad nubli zulkifli, azman jalar, r. ismail.  (2018).  deformation behavior relationship between tensile and nanoindentation tests of sac305 lead-free solder wire.  - soldering & surface mount technology.  194-202. 

emee marina salleh, zaifol samsu, norinsan kamil othman, azman jalar.  (2018).  kesan suhu celupan ke atas mikrostruktur dan kekerasan salutan aluminium pada keluli karbon.  - sains malaysiana.  . 

maria abu bakar, azman jalar & roslina ismail.  (2018).  kesan kemasan permukaan berbeza terhadap sifat mikromekanik sambungan pateri sac 0307 menggunakan pendekatan pelekukan nano.  - sains malaysiana.  . 

azman jalar, maria abu bakar, roslina ismail, najib saedi ibrahim, mohd ariffin ambak.  (2018).  kesan pigmen pewarna terhadap pertumbuhan sebatian antara logam sambungan pateri sn-3.0ag-0.5cu.  - sains malaysiana.  . 

maria abu bakar, azman jalar & roslina ismail.  (2018).  kesan pigmen pewarna terhadap pertumbuhan sebatian antara logam sambungan pateri.  - sains malaysiana.  . 

zuraihana bachok, abdullah aziz saad,fakhrozi che ani,azman jalar, mohamad aizat abas.  (2018).  structural assessment of lead free solder joint of miniaturized electronics assembly.  - international journal of integrated engineering.  . 

naif h. al-hardan, muhammad azmi abdul hamid, azman jalar, roslinda shamsudin and norinsan kamil othman.  (2017).  synthesis of magnesium-doped zno rods via hydrothermal method: a study of the structural and optical properties.  - ecs journal of solid state science and technology.  571-577. 

izhan abdullah, muhammad nubli zulkifli, azman jalar, roslina ismail,.  (2017).  deformation behaviour of sn-3.0 ag-0.5 cu (sac305) solder wire under varied tensile strain rates.  - soldering & surface mount technology.  110-117. 

wilfred paulus, irman abdul rahman, azman jalar, norinsan kamil othman, roslina ismail, wan yusmawati wan yusoff, maria abu bakar.  (2017).  the relationship between xrd peak intensity and mechanical properties of irradiated lead-free solder.  - materials science forum.  423-427. 

nor rahafza abdul manap, roslinda shamsudin, mohd norhafsam maghpor, muhammad azmi abdul hamid & azman jalar.  (2017).  sifat kinetik dan isoterma penjerapan formaldehid ke atas komposit serbuk serat kelapa sawit-tio2.  - sains malaysiana.  953-965. 

che ani f., jalar a., ismail r., othman n.k., khor c.y., samsudin z., abdullah m.z., azmi a..  (2016).  backward compatibility solder joint formation at high peak reflow temperature for aerospace applications.  - arabian journal for science and engineering.  1813-1823. 

bakar m.a., jalar a., daud a.r., ismail r., lah n.a.c., ibrahim n.s..  (2016).  nanoindentation approach on investigating micromechanical properties of joining from green solder materials.  - sains malaysiana.  1275-1279. 

abdul aziz m.s., abdullah m.z., khor c.y., jalar a., che ani f., yan n., cheok c..  (2016).  finite volume-based simulation of the wave soldering process: influence of the conveyor angle on pin-through-hole capillary flow.  - numerical heat transfer; part a: applications.  295-310. 

naif h al hardan, muhammad azmi abdul hamid, naser m ahmed, azman jalar, roslinda shamsudin, norinsan kamil othman, lim kar keng, wee siong chiu and hamzah n. al rawi.  (2016).  high sensitivity ph sensor based on porous silicon (psi) extended gate field effect transistor.  - sensors.  1-12. 

nor rahafza abdul manap, roslinda shamsudin, mohd norhafsam maghpor, muhammad azmi abdul hamid, azman jalar.  (2016).  effect of palm oil fiber-tio2 ratio in the composite on the reduction of btx and formaldehyde in the air.  - malaysian journal of analytical sciences.  324-328. 

arash dehzangi, farhad larki and sawal hamid md ali, sabar derita hutagalung, md shabiul islam, mohd nizar hamidon, susthitha menon and azman jalar, jumiah hassan, burhanuddin yeop majlis..  (2016).  study of the side gate junctionless transistor in accumulation region..  - microelectronics international.  61-67. 

m. s. abdul aziz, m. z. abdullah, c. y. khor, a. jalar, f. che ani.  (2015).  finite volume-based simulation of the wave soldering process: influence of the conveyor angle on pin-through-hole capillary flow.  - numerical heat transfer, part a: applications.  295-310. 

muhammad m.m., jalar a., shamsudin r., isa m.c..  (2015).  evaluation of the suitability of fly ash powder for atmospheric plasma spray.  - defence s and t technical bulletin.  1-8. 

ang lingyuen, norinsan kamil othman, azman jalar, ismayadi ismail.  (2015).  the effect of magnetic field on corrosion inhibitor of copper in 0.5 m nacl solution.  - american-eurasian journal of sustainable agriculture.  35-38. 

farhad larki, alam abedini, md. shabiul islam, sahbudin shaari, sawal hamid md ali, p. susthitha menon, azman jalar, elias saion, jahariah sampe, burhanuddin yeap majlis..  (2015).  structural phase transformations in radiolytically synthesized al cu bimetallic nanoparticles..  - journal of materials science.  4348-4356. 

roslina ismail, fuaida harun, muhammad nubli zulkifli, azman jalar, maria abu bakar, and shahrum abdullah.  (2015).  bondability of second copper wire bonds on silver and nickel palladium gold silver metallization.  - ieee transactions on components, packaging and manufacturing technology.  1541-1545. 

fuaida harun, roslina ismail, azman jalar, shahrum abdullah.  (2015).  effect of wire diameter and hook location on second bond failure modes.  - microelectronics international.  32-36. 

naif h. al hardan, muhammad azmi abdul hamid naser m. ahmed, azman jalar, roslinda shamsudin, norinsan kamil othman, lim kar keng and sabah m. mohammed.  (2015).  a study on the uv photoresponse of hydrothermally grown zinc oxide nanorods with different aspect ratios.  - ieee sensors journal.  6811-6818. 

solhan yahya , norinsan kamil othman , abdul razak daud , azman jalar , roslina ismail.  (2015).  the influence of temperature on the inhibition of carbon steel corrosion in acidic lignin.  - anti-corrosion methods and materials.  301-306. 

m z muzakkar, s.ahmad, m a yarmo, a jalar, m bijarimi, ratna.  (2015).  increasing the polarity of the aluminum surface and tpenr matrix with the addition 3-gps and pe-g-mah as a coupling agent to improve the lap shear strength of al-tpenr laminated composit.  - asian journal of applied sciences.  642-651. 

f che ani, a jalar, r ismail, nk othman, mz abdullah, ms abdul aziz, cy khor, m abu bakar.  (2015).  reflow optimization process: thermal stress using numerical analysis and intermetallic spallation in backwards compatibility solder joints.  - arabian journal for science and engineering.  1669-1679. 

ismail r., omar g., jalar a., majlis b.y..  (2015).  the influence of pd-doped au wire bonding on haz microstructure and looping profile in micro-electromechanical systems (mems) packaging.  - journal of electronic materials.  2507-2513. 

muzakkar m.z., ahmad s., yarmo m.a., jalar a., bijarimi m..  (2015).  shear strength of single lap joint aluminium-thermoplastic natural rubber (al-tpnr) laminated composite.  - springer series in materials science.  159-171. 

m s abdul aziz, m z abdullah, c y khor, a jalar, m a bakar, w y w yusoff, f che ani, nobe yan, m zhou & c cheok.  (2015).  effects of pcb thickness on adjustable fountain wave soldering.  - sadhana.  2197-2220. 

siew peng foo, wan yusmawati wan yusoff & azman jalar.  (2014).  dimensional and structural stability of gamma irradiated stacked die quad flat no leads (qfn).  - sains malaysiana.  827-832. 

m.s. abdul aziz, m.z. abdullah, c.y. khor, a. jalar, f. che ani.  (2014).  cfd modeling of pin shape effects on capillary flow during wave soldering.  - international journal of heat and mass transfer.  400-410. 

nurul atikah sharif, azaman jalar, muhamad izhar sahri, norinsan kamil othman.  (2014).  effect of high temperature corrosion on austenitic stainless steel grade 304 in co2 gas at 700ºc.  - sains malaysiana.  1069-1075. 

n.h al hardan, azman jalar, m.a. abdul hamid, lim kar keng, n.m. ahmed, r. shamsudin.  (2014).  a wide -band uv photodiode based on n-zno/p-si heterojunctions.  - sensors and actuators a:physical.  61-66. 

mohd moesli muhammad, mahdi che isa, azman jalar, roslinda shamsudin, syed rosli sayd bakar, mohd subhi din yati, nik hassanuddin nik yussof & hasril naim.  (2014).  study on the effects of atmospheric plasma spray (aps) process parameters on porosities of fly ash deposited coatings.  - defence s&t technical bulletin / science & technology research institute for defence (stride).  73-80. 

solhan yahya, norinsan kamil othman, abd razak daud, azman jalar.  (2014).  effect of scan rate on corrosion inhibition of carbon steel in the presence of rice straw extract-potentiodynamic studies.  - sains malaysiana.  1083-1087. 

wan yusmawati wan yusoff, roslina ismail, azman jalar, norinsan kamil othman, irman abdul rahman.  (2014).  microstructural evolution and micromechanical properties of gamma-irradiated au ball bonds.  - material characterization.  129-135. 

yahya s., othman n.k., daud a.r., jalar a..  (2014).  effect of scan rate on corrosion inhibition of carbon steel in the presence of rice straw extract - potentiodynamic studies.  - sains malaysiana.  1083 - 1087. 

farhad larki, arash dehzangi, sawal hamid md. ali, azman jalar, md. shabiul islam, mohd nizar hamidon, burhanuddin yeop majlis.  (2014).  effect of geometric parameters on the performance of p-type junctionless lateral gate transistors.  - plos one.  1-9. 

rabiahtul zulkafli, norinsan kamil othman*, irman abdul rahman, azman jalar.  (2014).  effect of rice straw extract and alkali lignin on the corrosion inhibition of carbon steel.  - the malaysian journal of analytical sciences.  204-211. 

n. mohamad, a. jalar & n.k. othman.  (2014).  surface morphology study on aluminum alloy after treated with silicate-based corrosion inhibitor from paddy residue.  - sains malaysiana.  935-940. 

rashita abd rashid, roslinda shamsudin, muhammad azmi abdul hamid, azman jalar.  (2014).  in-vitro bioactivity of wollastonite materials derived from limestone and silica sand.  - ceramics international.  40:6847-6853. 

n.h. al-hardan, azman jalar, m.a. abdul hamid, lim kar keng, r shamsudin, b.y. majlis.  (2014).  the room-temperature sensing performance of zno nanorods for 2-methoxyethanol solvent.  - sensors and actuators b: chemical.  223-228. 

azman jalar, nur azida che lah, norinsan kamil othman, roslinda shamsudin, abdul razak daud, and syed roslee sayd bakar.  (2014).  characterization of oxide growth on surface of al-mg-si welded joint.  - advances in materials science and engineering.  1-10. 

m.m. muhammada, m.c. isa, r. shamsudin, a. jalar.  (2014).  plasma spray deposition of fly ash onto mild steel substrates using a fractional factorial design approach.  - ceramics international.  13635-13642. 

m. s. abdul aziz, m. z. abdullah, c. y. khor, a. jalar, m. a. bakar, w. y. w. yusoff, f. che ani, n. yan, m. zhou, c. cheok.  (2014).  implications of adjustable fountain wave in pin through hole soldering process.  - arabian journal for science and engineering.  9101-911. 

m.a bakar, m.a.a hamid, a. jalar and r. shamsudin.  (2013).  morphology and optical prpoperties of zinc oxide films grown on metal coated glass substrates by aqueous chemical growth..  - journal of physics:conference series.  431:012004. 

n.h al hardan, azman jalar, m.a. abdul hamid, lim kar keng and r. shamsudin.  (2013).  structural and optical properties of a bi structured zno film prepared via electrodeposition.  - international journal of electrochemical science.  8:6767-6774. 

n.h.al hardan, m.a.abdul hamid, azman jalar, lim karkeng, r.shamsudin and b.y. majlis.  (2013).  bi-structure zno prepared via cathodic electrodeposition method.  - international journal of electrochemical science.  8: 2430-2439. 

denni asra awizar, norinsan kamil othman, azman jalar, abdul razak daud, i. abdul rahman1 dan n. h. al-hardan.  (2013).  nanosilicate extraction from rice husk ash as green corrosion inhibitor.  - international journal of electrochemical science.  8(2):1759-1769. 

s. yahya, n.k. othman*, a.r. daud & a. jalar.  (2013).  surface morphology studies of low carbon steel treated in aqueous lignin.  - sains malaysiana.  42(12):1793-1798. 

zulkifli, m.n., jalar, a., abdullah, s., rahman, i.a., othman, n.k..  (2013).  effect of applied load in the nanoindentation of gold ball bonds.  - journal of electronic materials.  42(6):1063-1072. 

zulkifli, muhammad nubli; jalar, azman; abdullah, shahrum; rahman, irman abdul; hamid, muhammad azmi abdul.  (2013).  strength distribution of au ball bond using nanoindentation approach.  - materials science and engineering a.  577:189-196. 

hazian mamat, azrul azlan hamzah, azman jalar, jumril yunas, nurfirdaus a. rahim.  (2013).  a comsol model to analyse the structural mechanical problem in an electrostatically controlled prestressed micro-mirror.  - world applied sciences journal.  26(7): 950-956. 

muhammad nubli zulkifli, shahrum abdullah, norinsan kamil othman, azman jalar.  (2012).  some thoughts on bondability and strength of gold wire bonding.  - gold bulletin.  45:115-125. 

muhammad azmi abdul hamid, maria abu bakar, azman jalar, roslinda shamsudin.  (2012).  substrate dependence of the properties of mgo films produced using an aqueous chemical growth method.  - current nanoscience.  8(1):50-54. 

wan yusmawati wan yusoff, azman jalar, norinsan kamil othman, irman abdul rahman.  (2011).  effect of gamma-irradiation towards stress-strain curve of single die qfn package.  - materials science forum.  694:620-624. 

lim, v; amin, n; foong, cs; ahmad, i; zaharim, a; rasid, r; jalar, a.  (2011).  effects of different catalytic activation techniques on the thermal performance of flip chip heat spreader[kesan teknik pengaktifan bermangkin berbeza terhadap prestasi terma penyebar haba cip balikan.  - sains malaysiana.  40(2):181-190. 

victor lim, nowshad amin, c.s. foong, ibrahim ahmad, azami zaharim, rozaidi rasid & azman jalar.  (2011).  kesan teknik pengaktifan bermangkin berbeza terhadap prestasi terma penyebar haba cip balikan.  - sains malaysiana.  40(2):181-190. 

c.l. nur azida, a. jalar, n.k. othman, a.r. daud.  (2011).  oxidation effect on welded aa6061 al alloy using er4043 filler metal.  - journal of applied mechanics and materials.  66-68:46-49. 

h. budiman, m. z. omar, a. jalar.  (2010).  effect of slope length to the sphericity of a356 aluminium alloy.  - international review of mechanical engineering (i.re.m.e.).  4(7):840-845. 

saud, n., jalar, a..  (2010).  sn-rich phase coarsening during isothermal annealing for as-soldered sn-ag-cu solder.  - journal of materials science: materials in electronics.  21(10):1083-1089. 

m. f. m. yunoh, s. abdullah and a. jalar.  (2010).  mechanical properties of qfn semiconductor package using flexural test.  - world applied sciences journal.  9:40-42. 

u. mokhtar, r. rasid, s. ahmad and a. jalar.  (2010).  effects of rubber-modified on thermal and mechanical properties of epoxy mold compound.  - solid state science and technology.  18(1):27-35. 

z. kornain, a. jalar, r. rashid , s. abdullah, b. lee.  (2010).  comparative study of phenolic-based and amine-based underfill materials in flip chip plastic ball grid array package.  - journal of electronic packaging, transactions of the asme.  132(4):1012-1017. 

abdullah, s; ariffin, ak; nizwan, cke; abdullah, mf; jalar, a; yunoh, mfm.  (2010).  failure analysis of a semiconductor packaging leadframe using the signal processing approach.  - international journal of modern physics b.  24(1-2):175-172. 

budiman h., omar m.z., jalar a., jaharah a.g..  (2009).  effect of water cooling on the production of al-si thixotropic feedstock by cooling slope casting.  - european journal of scientific research.  32(2):158-166. 

norliza ismail, muhammad azmi abdul hamid & azman jalar.  (2009).  microstructural characterization of au-in thin film deposited by electron beam evaporation.  - sains malaysiana.  38(1):91-94. 

abdullah s., yunoh m.f.m., kamarudin h., jalar a..  (2009).  role of strain rate on the micromechanical characterization properties of 4n gold micro wire: micro tensile and nanoindentation.  - european journal of scientific research.  28(1):33-43. 

abdullah s., abdullah m.f., ariffin a.k., jalar a..  (2009).  thermal-mechanical analysis of a different leadframe thickness of semiconductor package under the reflow process.  - american journal of applied sciences.  6(4):616-625. 

s. abdullah, m. f. abdullah, a. k. ariffin, a. jalar.  (2009).  effect of leadframe oxidation on the reliability of a quad flat no-lead package.  - journal of electronic packaging (transaction of the asme).  131(3):0310021-0310027. 

saud n., jalar a..  (2009).  sn-rich phase coarsening during isothermal annealing for as-soldered sn-ag-cu solder.  - journal of materials science: materials in electronics.  21(10):1083-1089. 

karen m.c. wong, a.r. daud, and azman jalar.  (2009).  microhardness and tensile properties of a 6xxx alloy through minor additions of zr.  - journal of materials engineering and performance.  18(1):62-65. 

fatimah hasim s.n., abdul hamid m.a., shamsudin r., jalar a..  (2009).  synthesis and characterization of zno thin films by thermal evaporation.  - journal of physics and chemistry of solids.  70(12):1501-1504. 

s. abdullah, z. endut, i. ahmad, a. jalar and s. m. yusof.  (2008).  dicing laminated wafer for qfn 3d stacked die packaging..  - advanced materials research.  31:202-205. 

karen wong mee chu, abdul razak daud & azman jalar.  (2008).  pengaruh unsur zirkonium terhadap sifat mekanik aloi tempaan al-1.2si-0.5mg-0.25fe.  - sains malaysiana.  37(2):189-193. 

a. jalar, m. f. rosle, m. a. a. hamid.  (2008).  die attach film performance in 3d gfn stacked die.  - wseas transaction on applied and theoretical menchanics.  3(3):104-113. 

m.k. md arshad, a. jalar, i. ahmad and g. omar.  (2007).  the characterization of al bond pad surface treatment in electroless nickel immersion gold (enig) deposition.  - american journal of applied sciences.  4(3):133-141.