j mogan, w. s. w. harun, k. kadirgama, d. ramasamy, f. m. foudzi, a. b. sulong, f. tarlochan and f. ahmad.  (2023).  fused deposition modelling of polymer composite: a progress.  - polymers.  1-28. 

minhalina ahmad buhairi, farhana mohd foudzi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, abdul hadi azman, wan sharuzi wan harun, msh al-furjan.  (2023).  review on volumetric energy density: influence on morphology and mechanical properties of ti6al4v manufactured via laser powder bed fusion.  - progress in additive manufacturing.  265-283. 

nurul nadiah mahmud, abu bakar sulong, kei ameyama.  (2023).  powder injection moulded ti6al4v-ha composite for implants.  - sains malaysiana.  1557-1565. 

h. hanizam, m. s. salleh, z. marjom, m. z. omar, a. b. sulong, s. a. sundi, h. boejang, a. h. abdul rasib.  (2023).  effect of heat treatment cycles on tensile performance and microstructural evolution of thixoformed mwcnt-a356 composite.  - journal of engineering science and technology.  1323-1338. 

mohd nur ikhmal salehmin, muhammad farhan hil me, wan ramli wan daud, nazlina haiza mohd yasin, mimi hani abu bakar, abu bakar sulong, swee su lim.  (2023).  construction of microbial electrodialysis cells equipped with internal proton migration pathways: enhancement of wastewater treatment, desalination, and hydrogen production.  - science of the total environment.  1-13. 

fathin iliana jamhari. farhana mohd foudzi, minhalina ahmad buhairi, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, nashrah hani jamadon, kim seah tan.  (2023).  influence of heat treatment parameters on microstructure and mechanical performance of titanium alloy in lpbf: a brief review.  - journal of materials research & technology.  4091-4110. 

al basir, norhamidi muhamad, abu bakar sulong, nashrah hani jamadon, farhana mohd foudzi.  (2023).  recent advances in processing of titanium and titanium alloys through metal injection molding for biomedical applications: 2013-2022.  - materials.  1-33. 

nabilah afiqah mohd radzuan, nisa naima khalid, farhana mohd foudzi, nishata royan rajendran royan and abu bakar sulong.  (2023).  mechanical analysis of 3d printed polyamide composites under different filler loadings.  - polymers.  1-11. 

fathin iliana jamhari, farhana mohd foudzi, minhalina ahmad buhairi, norhamidi muhamad, intan fadhlina mohamed, abu bakar sulong, nabilah afiqah mohd radzuan.  (2023).  impact of hot isostatic pressing on surface quality, porosity and performance of ti6al4v manufactured by laser powder bed fusion: a brief review.  - jurnal tribologi.  1-15. 

wei lin ng, lei zhou, abu bakar sulong, eng-poh ng & soon huat tan.  (2022).  modification of the commercial polyester filter media support with electrospun polyethylene terephthalate fibers and its application for air purification.  - science and technology for the built environment.  928-943. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, david hui.  (2022).  adhesion behaviour of 3d printed polyamide carbon fibre composite filament.  - reviews on advanced materials science.  838-848. 

mohd nur ikhmal salehmin, teuku husaini, jonathan goh, abu bakar sulong.  (2022).  high-pressure pem water electrolyser: a review on challenges and mitigation strategies towards green and low-cost hydrogen production.  - energy conversion and management.  1-28. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi.  (2022).  prestasi bahan polimer komposit dicetak menggunakan pemodelan pemendapan bersatu: suatu ulasan ringkas.  - sains malaysiana.  1545-1556. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2022).  sintering behavior of bi-material micro-component of 17-4ph stainless steel and ysintering behavior of bi-material micro-component of 17-4ph stainless steel and yttria-stabilized zirconia produced by.  - materials.  1-13. 

hedaiat moradpoor, hossein mohammadi, mohsen safaei, hamid reza mozaffari, roohollah sharifi, pourya gorji, abu bakar sulong, norhamidi muhamad, mona ebadi.  (2022).  recent advances on bacterial cellulose-based wound management: promises and challenges.  - international journal of polymer science.  1-24. 

qian wen yeang, abu bakar sulong, soon huat tan.  (2022).  electrospun carboxyl-functionalised multi-walled carbon nanotube/poly(vinyl alcohol) asymmetric pervaporation membrane: application and modeling.  - journal of applied polymer science.  1-19. 

hendra suherman, radwan dweiri, abu bakar sulong, mohd yusuf zakaria, yovial mahyoedin.  (2022).  improvement of the electrical-mechanical performance of epoxy/graphite composites based on the effects of particle size and curing conditions.  - polymers.  1-14. 

lohashenpahan shanmuganantha , azmi baharudin , abu bakar sulong , roslinda shamsudin and min hwei ng.  (2021).  prospect of metal ceramic (titanium-wollastonite) composite as permanent bone implants: a narrative review.  - materials.  1-24. 

shabbah begum, nor yuliana yuhana, noorashikin md saleh, nur hidayatul nazirah kamarudin, abu bakar sulong.  (2021).  review of chitosan composite as a heavy metal adsorbent: material preparation and properties.  - carbohydrate polymers.  1-9. 

hossein mohammadi, norhamidi muhamad, abu bakar sulong, mohsen ahmadipour.  (2021).  recent advances on biofunctionalization of metallic substrate using ceramic coating: how far are we from clinically stable implant?.  - journal of the taiwan institute of chemical engineers.  254-270. 

nabilah afiqah mohd radzuan, abu bakar sulong, iswandi.  (2021).  effect of multi-sized graphite filler on the mechanical properties and electrical conductivity.  - sains malaysiana.  2025-2034. 

nur farhani ismail, nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2021).  the effect of alkali treatment on physical, mechanical and thermal properties of kenaf fiber and polymer epoxy composites.  - polymers.  1-17. 

hossein mohammadi, mohammad majid sepantafar, norhamidi muhamad, abu bakar sulong.  (2021).  how does scaffold porosity conduct bone tissue regeneration?.  - advanced engineering materials.  1-19. 

m.ahsanul haque. abu bakar sulong, l.kee shyuan, e.herianto majlan, t. husaini, r.emilia rosli.  (2021).  synthesis of polymer/mwcnt nanocomposite catalyst supporting materials for high-temperature pem fuel cells.  - international journal of hydrogen energy.  4339-4353. 

nurul nadiah mahmud, abu bakar sulong, bhupendra sharma and kei ameyama.  (2021).  presintered titanium-hydroxyapatite composite fabricated via pim route.  - metals.  1-10. 

nurul nadiah mahmud, farah atiqah abdul azam, mohd ikram ramli, farhana mohd foudzi, kei ameyama, abu bakar sulong.  (2021).  rheological properties of irregular-shaped titanium-hydroxyapatite bimodal powder composite moulded by powder injection moulding.  - journal of materials research and technology.  2255-2264. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2021).  feedstock properties and debinding mechanism of yttria-stabilized zirconia/ stainless steel 17-4ph micro-components fabricated via two-component micro-powder injection molding process.  - ceramics international.  20476-20485. 

tan koon tatt, norhamidi muhamad, andanastuti muchtar, abu bakar sulong & kok yih shia.  (2021).  production of porous stainless steel using the space holder method.  - sains malaysiana.  507-514. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad, ukwueze bonaventure emeka.  (2021).  process parameters used in macro/micro powder injection molding: an overview.  - metals and materials international.  2023-2045. 

mohd yusuf zakaria, mohd ikram ramli, abu bakar sulong, norhamidi muhamad, muhammad hussain ismail.  (2021).  application of sodium chloride as space holder for powder injection molding of alloy titanium - hydroxyapatite composites.  - journal of materials research and technology.  478-486. 

nabilah afiqah mohd radzuan, abu bakar sulong, anil verma, and norhamidi muhamad.  (2021).  layup sequence and interfacial bonding of additively manufactured polymeric composite: a brief review.  - nanotechnology reviews.  1-20. 

nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mohd yusuf zakaria and mohd ikram ramli.  (2020).  study on the influence mechanism of sintering hydroxyapatite (ha).  - journal of ceramic processing research.  662-666. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2020).  effects of high-temperature exposure on the mechanical properties of kenaf composites.  - polymers.  1-13. 

h. hanizam, m.s. salleh, m.z. omar, a.b. sulong, m.a.m. arif.  (2020).  effects of hybrid processing on microstructural and mechanical properties of thixoformed aluminum matrix composite.  - journal of alloys and compounds.  1-12. 

nur fawwaz asri, teuku husaini, abu bakar sulong, edy herianto majlan.  (2020).  effects of the synthesis coating parameters for metal bipolar plates.  - sains malaysiana.  1-20. 

majid niaz akhtar, sumbal javed, mukhtar ahmad, abu bakar sulong, muhammad azhar khand.  (2020).  sol gel derived mnti doped co2 w-type hexagonal ferrites: structural, physical, spectral and magnetic evaluations.  - ceramics international.  7842-7849. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2020).  bi-material micro-part of stainless steel and zirconia by two-component micro-powder injection molding: rheological properties and solvent debinding behavior.  - metals.  1-17. 

farah atiqah abdul azam, nishata royan rajendran royan, nor yuliana yuhana, nabilah afiqah mohd radzuan, sahrim ahmad and abu bakar sulong.  (2020).  fabrication of porous recycled hdpe biocomposites foam: effect of rice husk filler contents and surface treatments on the mechanical properties.  - polymers.  1-14. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad, che hassan che haron.  (2020).  new processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts.  - composites part b: engineering.  1-7. 

youping gong, fei wang, m. s. h. al furjan, lijun shan, jingyang he, xiangjuan bian,zhikai bi, haiqiang liu, wenxin li, huifeng shao, guojin chen and abu bakar sulong 4.  (2020).  experimental investigation and optimal 3d bioprinting parameters of sa gel porous cartilage scaffold.  - applied sciences.  1-22. 

tant koon tatt, norhamidi muhamad, che hassan che haron, abu bakar sulong.  (2020).  parametric optimization of metal injection moulding process using taguchi method.  - the international journal of integrated engineering.  210-219. 

farah 'atiqah abdul azam, zakaria razak, mohd khairul fadzly md radzi, norhamidi muhammad, che hassan che haron, and abu bakar sulong.  (2020).  influence of multiwalled carbon nanotubes on the rheological behavior and physical properties of kenaf fiber reinforced polypropylene composites.  - polymers.  1-13. 

iswandi, abu bakar sulong, teuku husaini.  (2019).  effects of graphite/polypropylene on the electrical conductivity of manufactured bipolar plate.  - malaysian journal of analytical sciences.  355-361. 

nurato, edy herianto majlan, wan ramli wan daud, teuku husaini, masli irwan rosli, abu bakar sulong, darwin sebayang.  (2019).  finite element analysis for stress distribution in a proton exchange membrane fuel cell stack.  - international journal of integrated engineering.  233-240. 

najlaa nazihah masood, abu bakar sulong, norhamidi muhamad, farhana mohd foudzi, farrahshaida mohd salleh.  (2019).  the study of sintering behavior of stainless steel 17-4ph-stainless steel 316l for two materials powders injection molding (2c-pim) process.  - journal of mechanical engineering.  67-77. 

md ahsanul haque, abu bakar sulong, edy herianto majlan, kee shyuan loh, teuku husaini, rosemilia rosli.  (2019).  oxygen reduction reaction behaviours of carbon nanotubes supporting pt catalyst for proton exchange membrane fuel cell.  - malaysian journal of analytical sciences.  147-154. 

lijun shan, abdul amir h. kadhum, m.s.h. al-furjan, wenjian weng, youping gong, kui cheng, maoying zhou, lingqing dong, guojin chen, mohd s. takriff, abu bakar sulong.  (2019).  in situ controlled surface microstructure of 3d printed ti alloy to promote its osteointegration.  - materials.  1-13. 

h. hanizam, m.s. salleh, m.z. omar, a.b. sulong.  (2019).  effects of mechanical stirring and short heat treatment on thixoformed of carbon nanotube aluminium alloy composite.  - journal of alloys and compounds.  83-90. 

nabilah afiqah mohd radzuan, abu bakar sulong, teuku husaini, edy herianto majlan, masli irwan rosli, muhammad firdaus aman.  (2019).  fabrication of multi-filler mcf/mwcnt/sg-based bipolar plates.  - ceramics international.  . 

m. a. haque, a. b. sulong, e. h. majlan, k. s. loh, t. husaini, r. rosli.  (2019).  physiochemical characteristics of solid electrolyte membranes for high-temperature pem fuel cell.  - international journal of electrochemical science.  . 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad, muhammad rafi raza, mohd ikram ramli.  (2019).  incorporation of wollastonite bioactive ceramic with titanium for medical applications: an overview.  - materials science & engineering c.  . 

rosli, r.e., sulong, a.b., daud, w.r.w., zulkifley, m.a., rosli, m.i., majlan, e.h., haque, m.a. & radzuan n.a.m..  (2019).  the design and development of an ht-pemfc test cell and test station.  - international journal of hydrogen energy.  30763-30771. 

zakaria razak, abu bakar sulong, norhamidi muhamad, che hassan che haron, mohd khairul fadzly md radzi, nur farhani ismail, dulina tholibon, izdihar tharazi.  (2019).  effects of thermal cycling on physical and tensile properties of injection moulded kenaf/carbon nanotubes/polypropylene hybrid composites.  - composites part b: engineering.  . 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu, ahmad tajuddin abdullah, teuku husaini, ros emilia rosli, edy herianto majlan, masli irwan rosli.  (2019).  fibre orientation effect on polypropylene/milled carbon fiber composites in the presence of carbon nanotubes or graphene as a secondary filler: application on pem fuel cell bipolar plate.  - international journal of hydrogen energy.  30618-30626. 

nabilah afiqah mohd radzuan, nur farhani ismail, mohd khairul fadzly md radzi, zakaria bin razak, izdihar binti tharizi, abu bakar sulong, che hassan che haron, norhamidi muhamad.  (2019).  kenaf composites for automotive components: enhancement in machinability and moldability.  - polymers.  1-10. 

hashim hanizam, mohd shukor salleh, mohd zaidi omar, abu bakar sulong.  (2019).  optimisation of mechanical stir casting parameters for fabrication of carbon nanotubes-aluminium alloy composite through taguchi method.  - journal of materials research and technology-jmr&t.  2223-2231. 

nabilah afiqah mohd radzuan , abu bakar sulong, david hui and anil verma.  (2019).  electrical conductivity performance of predicted modified fibre contact model for multi-filler polymer composite.  - polymers.  1-12. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2019).  effect of sintering on the microstructure and mechanical properties of alloy titaniumwollastonite composite fabricated by powder injection moulding process.  - ceramics international.  11648-11653. 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad, mohd ikram ramli.  (2019).  rheological properties of titanium-hydroxyapatite with powder space holder composite feedstock for powder injection moulding.  - international journal of advanced manufacturing technology.  2591-2599. 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu.  (2019).  influence the filler orientation on the performance of bipolar plate.  - sains malaysiana.  669-676. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2018).  pengoptimuman parameter pengacuan suntikan terhadap ketumpatan jasad anum untuk komposit aloi titanium-wolastonit.  - sains malaysiana.  . 

majid niaz akhtar, a.b. sulong, m.n. akhtar, muhammad azhar khan.  (2018).  systematic study of ce3þ on the structural and magnetic properties of cu nanosized ferrites for potential applications.  - journal of rare earths.  156-164. 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong.  (2018).  microstructure and physical and mechanical properties of micro cemented carbide injection.  - powder technology.  151-158. 

majid niaz akhtar, abu bakar sulong, a. umer, ammar bin yousaf, muhammad azhar khan.  (2018).  multi-component mwcnt/ng/ep-based bipolar plates with enhanced mechanical and electrical characteristics fabricated by compression moulding.  - ceramics international.  . 

najla nazihah mas'ood, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farhana mohd foudzi, mohd ikram ramli, farrahshaida mohd salleh.  (2018).  flow behavior and injectability of ss17-4ph with ps and pe binders in powder injection molding.  - journal of advanced research in fluid mechanics and thermal sciences.  121-125. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi, mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel hydroxyapatite composite.  - plos one.  1-17. 

qian wen yean, abu bakar sulong, soon huat tan.  (2018).  asymmetric membrane containing electrospun cu-btc/poly(vinyl alcohol) for pervaporation dehydration of 1,4-dioxane.  - separation and purification technology.  . 

majid jafarzadehghoushji, r. alebrahim, rozli zulkifli, abu bakar sulong, shahrum abdullah, che husna azhari.  (2018).  crashworthiness characteristics of natural ramie/bio-epoxy composite tubes for energy absorption application.  - iranian polymer journal.  . 

ukwueze, bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri.  (2018).  solvent de-binding of bi-material green component of two-component powder injection moulded stainless steel and zirconia.  - international journal of mechanical & mechatronics engineering.  . 

n.f. ismail, n. muhamad, a.b. sulong & c.h.c. haron.  (2018).  effects of alkali treatment on mechanical properties of epoxy composites reinforced kenaf fibre using compression moulding process.  - international journal of mechanical & mechatronics engineering.  . 

najlaa nazihah mas'ood, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farhana mohd foudzi, mohd ikram ramli, farrahshaida mohd salleh.  (2018).  flow behavior and injectability of ss17-4ph with ps and pe binders in powder injection molding.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi , mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel-hydroxyapatite composite.  - plos one.  . 

nor nabilla kadiman, muhammad omar abdul rashid, norhamidi muhamad dan abu bakar sulong.  (2018).  effects of sintering temperature on the physical and mechanical properties of injection-molded copper/graphene composite.  - journal of advanced manufacturing technology.  . 

nabilah afiqah mohd radzuan, abu bakar sulong , mahendra rao somalu , edy herianto majlan, teuku husaini and masli irwan rosli.  (2018).  effects of die configuration on the electrical conductivity of polypropylene reinforced milled carbon fibers: an application on a bipolar plate.  - polymers.  . 

mohd yusuf zakaria, abu bakar sulong, mohd ikram ramli, bonaventure ukwueze, wan sharuzi wan harun dan rahimi l. mahmud.  (2018).  fabrication of porous titaniumhydroxyapatite composite via powder metallurgy with space holder method.  - journal of advanced manufacturing technology.  . 

nishata royan rajendran royan, abu bakar sulong, nor yuliana yuhana, ruey shan chen, mohd hafizuddin ab ghani, sahrim ahmad.  (2018).  uv/o3 treatment as a surface modification of rice husk towards preparation of novel biocomposites.  - plos one.  . 

abu bakar sulong, nabilah afiqah mohd radzuan, mohd rizal mamat,izdihar tharazi, dulina tholibon, radwan dweiri, mohannad saleh hammadi.  (2018).  kenaf reinforced pla composite thermoforming: a numerical simulation.  - international journal of integrated engineering.  . 

zakaria razak, abu bakar sulong, norhamidi muhamad, che hassan che haron, mohd khairol fadzly md radzi, dulina tholibon, izdihar tharazi & nur farhani ismail.  (2018).  the effects of maleic anhydride grafted pp (mapp) on the mechanical properties of injection moulded kenaf/cnts/pp composites.  - sains malaysiana.  . 

nor nabilla kadiman, julie elvyana romli, norhamidi muhamad, abu bakar sulong & farhana mohd foudzi.  (2018).  pengoptimuman parameter sonikasi dan pengacauan magnetik bagi mendapatkan penyerakan sebati komposit kuprum-grafin berdasarkan sifat morfologi.  - sains malaysiana.  . 

radwan dweiri, hendra suherman, abu bakar sulong and jafar f. al-sharab.  (2018).  structure-property-processing investigation of electrically conductive polypropylene nanocomposites.  - science and engineering of composite materials.  . 

a a abdullah, h norita, h n azlina, a b sulong, n n masood.  (2018).  preparation of ss316l mim feedstock with biopolymer as a binder.  - iop conference series: materials science and engineering.  . 

hendra suherman, abu bakar sulong, mohd yusuf zakaria, nishata royan, and jaafar sahari.  (2018).  electrical conductivity and physical changes of functionalized carbon nanotube/graphite/stainless steel (ss316l)/polypropylene composites immersed in an acidic solution.  - songklanakarin journal of science and technology.  . 

zakaria razak , abu bakar sulong, norhamidi muhamad, mohd. khairul fadzly md radzi, nur farhani ismail, dulina tholibon and izdihar tharazi.  (2018).  numerical simulation analysis of wood/pp composites for injection-moulded car battery trays.  - international journal of engineering and technology(uae).  . 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu,hendra suherman.  (2018).  electrical conductivity models of die configuration for polypropylene-reinforced milled carbon fibre.  - journal of advanced manufacturing technology.  . 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong.  (2018).  investigation on feedstock preparation for micro-cemented carbide injection molding.  - powder metallurgy progress.  96-102. 

nabilah afiqah mohd radzuan, abu bakar sulong, jaafar sahari.  (2017).  a review of electrical conductivity models for conductive polymer composite.  - international journal of hydrogen energy.  9262-9273. 

ahmad,r.n., muhamad,n., sulong, a.b., wahi, a., salleh, f.m..  (2017).  rheological properties of titanium niobium based feedstocks for metal injection molding.  - journal of mechanical engineering.  139-149. 

nishata royan rajendran royan, abu bakar sulong, nor yuliana yuhana, mohd hafizuddin ab ghani, sahrim ahmad.  (2017).  pengoptimumam pemprosesan komposit rhdpe berpenguat sekam padi dengan kaedah tindak balas permukaan (rsm).  - sains malaysiana.  1749-1756. 

nur fawwaz asri, t. husaini, edy herianto majlan, abu bakar sulong, wan ramli wan daud.  (2017).  electrochemical behaviour and interfacial contact resistance of ti-6al-4v and sus 316l plates with potential application as a bipolar plate in pemfc.  - journal of mechanical engineering.  155-170. 

asri,n.f., husaini,t., majlan, e.h., sulong,a.b., daud, w.r.w..  (2017).  electrochemical behaviour and of ti-6al-4v and sus 316l plates with potential application as a bipolar plate in pemfc.  - journal of mechanical engineering.  155-170. 

majid j ghoushji, rahim a eshkoor, rozli zulkifli, abu b sulong, shahrum abdullah and che h azhari.  (2017).  energy absorption capability of axially compressed woven natural ramie/green epoxy square composite tubes.  - journal of reinforced plastics and composites.  . 

gaaz,t.s., sulong, a.b., kadhum, a.h..  (2017).  influence of sulfuric acid on the tensile properties of halloysite reinforced polyurethane composite.  - journal of mechanical engineering.  1-10. 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri.  (2017).  the characterization and rheological investigation of materials for powder injection molding.  - journal of mechanical engineering.  97-107. 

nor nabilla kadiman, julie elbyana romli, norhamidi muhamad, abu bakar sulong, farhana mohd foudzi.  (2017).  pengoptimuman parameter sonikasi dan pengacauan magnetik bagi mendapatkan penyerakan sebati komposit kuprum-grafin berdasarkan sifat morfologi.  - sains malaysiana.  1039-1043. 

farrahshaida mohd salleh, abu bakar sulong, farhana mohd foudzi, intan fadhlina mohamed, natasha emira azaman, najla nazihah mas'ood, seong jin park.  (2017).  flow behavior characterization of hydroxyapatite for powder injection molding (pim).  - journal of mechanical engineering.  77-88. 

tayser sumer gaaz, abu bakar sulong, abdul amir h. kadhum, mohamed h. nassir and ahmed a. al amiery.  (2017).  optimizing physio mechanical properties of halloysite reinforced polyurethane nanocomposites by taguchi approach.  - science of advanced materials.  1-13. 

nishata royan rajendran royan, abu bakar sulong, nor yuliana yuhana,mohd hafizuddin ab ghani,sahrim ahmad.  (2017).  pengoptimumam pemprosesan komposit rhdpe berpenguat sekam padi dengan kaedah tindak balas permukaan (rsm).  - sains malaysiana.  . 

majid niaz akhtar, a. rahman, a.b. sulong, muhammad azhar khan.  (2017).  structural, spectral, dielectric and magnetic properties of ni0.5mgxzn0.5-xfe2o4 nanosized ferrites for microwave absorption and high frequency applications.  - ceramics international.  4357-4365. 

tayser sumer gaaz, abdul amir h kadhum, patina kiah anak michael, ahmed al amiery, abu bakar sulong, abu bakar sulong, mohamed h nassir, ahmed hameed jaaz.  (2017).  unique halloysite nanotubes polyvinyl alcohol polyvinylpyrrolidone composite complemented with physico chemical characterization.  - polymers.  207-222. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2017).  rheological properties of titanium alloy ti6al4v wollastonite w composite using palm stearin as based binder.  - journal of mechanical engineering.  87-96. 

mohd yusuf zakaria, abu bakar sulong, mohd ikram ramli, muhammad rafi raza.  (2017).  determination of critical powder loading of titanium hydroxyapatite with powder space holder for powder injection molding feedstocks.  - journal of mechanical engineering.  11-21. 

nur farhani ismail, norhamidi muhamad, abu bakar sulong, che hassan che haron, dulina tholibon, izdihar tharazi, mohd khairul fadzly mdradzi, zakaria razak.  (2017).  mechanical properties of compression molded epoxy polymer composites reinforced with kenaf fibers.  - journal of mechanical engineering.  1-12. 

dulina tholibon, abu bakar sulong, norhamidi muhamad, nur farhani ismail, izdihar tharazi, mohd khairul fadzly md radzi.  (2017).  optimization of hot pressing process for unidirectional kenaf polypropylene composites by full factorial design.  - journal of mechanical engineering.  23-35. 

zakaria razak, abu bakar sulong, norhamidi muhamad, mohd khairul fadzly mdradzi, dulina tholibon, izdihar tharazi, nur farhani ismail.  (2017).  effect of multi-walled carbon nanotube on mechanical properties of kenaf/polypropylene composites.  - journal of mechanical engineering.  107-117. 

ghoushji, m.j., eshkoor, r.a., zulkifli, r., sulong, a.b., abdullah, s., azhari, c.h..  (2017).  energy absorption capability of axially compressed woven natural ramie/green epoxy square composite tubes.  - journal of reinforced plastics and composites.  1028-1037. 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu.  (2017).  electrical properties of extruded milled carbon fibre and polypropylene.  - journal of composite materials.  3187-3195. 

salleh, f.m., sulong, a.b., raza, m.r., muhamad,n., fhang, l.t.  (2017).  effect of space holders on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding.  - sains malaysiana.  1651-1657. 

gaaz, ts., sulong, a.b., ansari, m.n.m., kadhum, a.a.h., al-amiery, a.a., nassir, m.h..  (2017).  effects of starch loading on the thermo mechanical and morphological properties of polyurethane composites.  - materials.  1-14. 

amir arifin, abu bakar sulong, lee choy fun, gunawan and irsyadi yani.  (2017).  porous titanium alloy/hydroxyapatite composite using powder compaction route.  - journal of mechanical engineering and sciences.  . 

gaaz, t.s., sulong, a.b., kadhum, a.a.h., al-amiery, a.a., nassir, m.h., jaaz, a.h..  (2017).  the impact of halloysite on the thermo-mechanical properties of polymer composites.  - molecules.  838-858. 

m. ahsanul haque , a.b. sulong, k.s. loh, e. herianto majlan,t. husaini, r. emilia rosli.  (2017).  acid doped polybenzimidazoles based membrane electrode assembly for high temperature proton exchange membrane fuel cell: a review.  - international journal hydrogen energy.  9156-9179. 

raza, m.r., ahmad, f., muhamad, n., sulong, a.b., omar, m.a., akhtar, m.n., aslam, m., sherazi, i..  (2017).  effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 l - stainless steel.  - sains malaysiana.  285-293. 

nur fawwaz asri, teuku husaini, abu bakar sulong, edy herianto majlan, wan ramli wan daud.  (2017).  coating of stainless steel and titanium bipolar plates for anticorrosion in pemfc: a review.  - international journal of hydrogen energy.  9135-9148. 

gaaz, t.s., sulong, a.b., kadhum, a.a.h., nassir, m.h., al-amiery, a.a..  (2017).  surface improvement of halloysite nanotubes.  - applied sciences (switzerland).  291-299. 

salleh f.m., sulong a.b., raza m.r., muhamad n., fhang l.t..  (2017).  effects of space holder on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding.  - sains malaysiana.  . 

tayser sumer gaaz , abu bakar sulong , abdul amir h. kadhum , mohamed h. nassir , ahmed a. al-amiery.  (2017).  absolute variation of the mechanical characteristics of halloysite reinforced polyurethane nanocomposites complemented by taguchi and anova approaches.  - results in physics.  3287-3300. 

m.f.f.a.hamidi, w.s.w.harun, m.samykano, s.a.c.ghani, z.ghazali, f.ahmad, a.b.sulong.  (2017).  a review of biocompatible metal injection moulding process parameters for biomedical applications.  - materials science and engineering c.  1263-1276. 

nabilah afiqah mohd radzuan,mohd yusuf zakaria, abu bakar sulong,jaafar sahari.  (2017).  the effect of milled carbon fibre filler on electrical conductivity in highly conductive polymer composites.  - composites part b : engineering.  153-160. 

r.e. rosli, a.b. sulong, w.r.w. daud, m.a. zulkifley, t. husaini, m.i. rosli, e.h. majlan, m.a. haque.  (2017).  a review of high-temperature proton exchange membrane fuel cell (ht-pemfc) system.  - international journal of hydrogen energy.  9293-9314. 

nishata royan rajendran royan, abu bakar sulong, nor yuliana yuhana mohd, mohd hafizuddin abdul ghani, sahrim ahmad.  (2017).  effect uv/o3 modified rice husk on the mechanical properties of recycle hdpe rice husk composite.  - journal of mechanical engineering.  13-22. 

nurul akidah baharuddin, andanastuti muchtar, mahendra rao somalu, abu bakar sulong, huda abdullah.  (2016).  pengaruh suhu sinter terhadap prestasi elektrokimia katod komposit sel bahan api oksida pepejal (sofc) lscf-sdcc.  - sains malaysiana.  459-465. 

majid niaz akhtar, abu bakar sulong , mukhtar ahmad, muhammad azhar khan,akbar ali, m.u. islam.  (2016).  impacts of gdece on the structural, morphological and magnetic properties of garnet nanocrystalline ferrites synthesized via solegel route.  - journal of alloys and compounds.  486-495. 

majid niaz akhtar, abu bakar sulong, saniah ab karim, che husna azhari, mr raza.  (2016).  evaluation of thermal, morphological and mechanical properties of pmma/nacl/dmf electrospun nanofibers: an investigation through surface methodology approach.  - iranian polymer journal.  1025-1038. 

muhammad rafi raza, faiz ahmad, norhamidi muhamad , abu bakar sulong , m.a. omar,majid niaz akhtar, muhammad aslam.  (2016).  effects of solid loading and cooling rate on the mechanical properties and corrosion behavior of powder injection molded 316 l stainless steel.  - powder technology.  135-142. 

abu bakar sulong, amir arifin, zambri harun.  (2016).  jig prototype for computer-assisted total knee replacement and its flow simulation.  - international journal of technology.  132-140. 

tayser sumer gaaz, abu bakar sulong, abdul amir h. kadhum, mohamed h. nassir and ahmed a. al-amiery.  (2016).  impact of sulfuric acid treatment of halloysite on physico-chemic property modification.  - materials.  1-16. 

majid niaz akhtar, abu bakar sulong, muhammad azhar khan, mukhtar ahmad, ghulam murtaza, m.r. raza, r. raza, m. saleem, m. kashiff.  (2016).  structural and magnetic properties of yttrium iron garnet (yig) and yttrium aluminum iron garnet (yaig) nanoferrites prepared by microemulsion method.  - journal of magnetism and magnetic materials.  425-431. 

tayser sumer gaas, abu bakar sulong, abdul amir h. kadhum, mohamed h. nassir and ahmed a. al amiery.  (2016).  optimizing injection molding parameters of different halloysites type reinforced thermoplastic polyurethane nanocomposites via taguchi complemented with anova.  - materials.  1-19. 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu.  (2016).  pengoptimuman proses penyemperitan gentian karbon terkisar dan polipropilena bagi komposit polimer pengalir.  - sains malaysiana.  1913-1921. 

iswandi, jaafar sahari, abu bakar sulong, teuku husaini.  (2016).  critical powder loading and rheological properties of polypropylene/graphite composite feedstock for bipolar plate application.  - malaysian journal of analytical sciences.  687-696. 

majid niaz akhtara, abu bakar sulong, m.k. fadzly radzi, n.f. ismail, m.r. razab, norhamidi muhamad, muhammad azhar khan.  (2016).  influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications.  - progress in natural science: materials international.  657-664. 

gaaz, t.s., sulong, a.b., ansari,m.n.m., h kadhum, a.a., al-amiery, a.a., al-furjan, m.s.h..  (2016).  effect of halloysite nanotubes loading on thermo-mechanical and morphological properties of polyurethane nanocomposites.  - materials technology.  430-442. 

wahi a., muhamad n., sulong a.b., ahmad r.n..  (2016).  effect of sintering temperature on density, hardness and strength of mim co30cr6mo biomedical alloy.  - funtai oyobi fummatsu yakin/journal of the japan society of powder and powder metallurgy.  434-437. 

baharuddin n.a., muchtar a., somalu m.r., sulong a.b., abdullah h..  (2016).  effects of sintering temperature on the electrochemical performance of solid oxide fuel cell (sofc) composite cathode lscf-sdcc.  - sains malaysiana.  459-465. 

tatt t.k., muhamad n., muchtar a., sulong a.b., cherng n.m..  (2016).  influence of sintering parameters on the compressive yield strength of stainless steel foams produced by the space holder method.  - sains malaysiana.  653-658. 

dulina tholibon, abu bakar sulong, norhamidi muhammad, nur farhani ismail, izdihar tharazi, mohd khairul fadzly md radzi.  (2016).  tensile properties of unidirectional kenaf fiber polypropylene composite.  - jurnal teknologi.  101-106. 

mohd khairul fadzly md radzi, abu bakar sulong, baharuddin mohd zanggi, norhamidi muhammad.  (2016).  mouldability of wood filler reinforced polypropylene composite for injection moulded engine cover using mould filing simulation.  - jurnal teknologi.  75-81. 

tayser sumer gaaz, abu bakar sulong, abdul amir h. kadhum.  (2016).  effect of hnts addition in the injection moulded thermoplastic polyurethane matrix on the mechanical and thermal properties.  - sains malaysiana.  1235-1242. 

ismail, n. f., sulong, a. b.*, muhamad, n., tholibon, d., mdradzi, m. k. f. wan ibrahim, w. a. s..  (2015).  review of the compression moulding of natural fiber reinforced thermoset composites material processing and characterisations.  - pertanika journal of science and technology.  533-547. 

md radzi m. k. f., sulong, a. b., muhamad, n., mohd latiff, m. a., and ismail, n. f..  (2015).  effect of filler loading and naoh addition on mechanical properties of moulded kenaf polypropylene composite.  - pertanika journal tropical agricultural science.  583-590. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif.  (2015).  characterization of hydroxyapatite ti6al4v composite powder under various sintering temperature.  - jurnal teknologi.  27-31. 

wong yee ning, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, muhammad rafi raza.  (2015).  effects of vanadium carbide on sintered wc-10%co produced by micro-powder injection molding.  - sains malaysiana.  1175-1181. 

j. rajabi, a. b. sulong, n. muhamad, m. r. raza.  (2015).  powder compaction of bi-materials:stainless steel 316l and nanocrystaline yttria stabilized zirconia.  - materials technology.  313-320. 

tayser sumer gaaz, abu bakar sulong , majid niaz akhtar , abdul amir h. kadhum, abu bakar mohamad and ahmed a. al amiery.  (2015).  properties and applications of polyvinyl alcohol, halloysite nanotubes and their nanocomposites.  - molecules.  22833-22847. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2015).  powder injection molding of ha ti6al4v composite using palm stearin as based binder for implant material.  - material and design.  1028-1034. 

eshkoor r.a., ude a.u., sulong a.b., zulkifli r., ariffin a.k., azhari c.h..  (2015).  energy absorption and load carrying capability of woven natural silk epoxy - triggered composite tubes.  - composites part b: engineering.  10-18. 

mohd yusuf zakaria, abu bakar sulong, jaafar sahari, hendra suherman,.  (2015).  effect of the addition of milled carbon fiber as a secondary filler on the electrical conductivity of graphite/epoxy composites for electrical conductive materials.  - composite part b.  75-80. 

fayyaz a., muhamad n., sulong a.b., yunn h.s., amin s.y.m., rajabi j..  (2015).  micro-powder injection molding of cemented tungsten carbide: feedstock preparation and properties.  - ceramics international.  3605-3612. 

w.m.f wan mahmood, j.a. ghani, n. saibani, z. harun, a.b. sulong, m.j. ghazali, m.r.a. mansor, s. abdullah.  (2015).  performance of undergraduate students in conducting research in two engineering programmes.  - journal of engineering science and technology.  52-60. 

rajabi j., zakaria h., muhamad n., sulong a.b., fayyaz a..  (2015).  fabrication of miniature parts using nano-sized powders and an environmentally friendly binder through micro powder injection molding.  - microsystem technologies.  1131-1136. 

s.a. muhammed ali, ros emilia rosli, andanastuti muchtar, abu bakar sulong, mahendra rao somalu, edy herianto majlan.  (2015).  effect of sintering temperature on surface morphology and electrical properties of samarium-doped ceria carbonate for solid oxide fuel cells.  - ceramics international.  1323-1332. 

muhammad rafi raza, abu bakar sulong, norhamidi muhamad, majid niaz akhtar, javad rajabi.  (2015).  effects of binder system and processing parameters on formability of porous ti/ha composite through powder injection molding.  - materials and design.  386-392. 

nurul akidah baharuddin, hamimah ab rahman, andanastuti muchtar, abu bakar sulong & huda abdullah.  (2014).  kesan masa pengendapan dan saiz elektrod pembalik dalam penghasilan katod komposit lscf-sdc karbonat sel fuel oksida pepejal.  - sains malaysiana.  43(4): 595-601. 

wan hasbulalfi wan haron, dulina tholibon, abu bakar sulong, nur farhani ismail.  (2014).  composite based mixed recycled plastic with tropical wood dust mechanical and physical properties.  - australian journal of basic and applied sciences.  288-291. 

javad rajabi, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, muhammad rafi raza.  (2014).  the effect of nano-sized stainless steel powder addition on mechanical and physical properties of micropowder injection molded part.  - materials and design.  223-232. 

m. i. ramli, a. b. sulong, n. muhamad, a. muchtar and a. arifin.  (2014).  stainless steel 316l hydroxyapatite composite via powder injection moulding: rheological and mechanical properties characterisation.  - material research innovation.  100-104. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2014).  material processing of hydroxyapatite and titanium alloy (ha/ti) composite as implant materials using powder metallurgy: a review.  - materials and design.  55:165-175. 

hafizawati zakaria, norhamidi muhamad, abu bakar sulong, mohd halim irwan ibrahim, farhana mohd foudzi.  (2014).  moldability characteristics of 3mol yttria stabilized zirconia feedstock for micro-powder injection molding process.  - sains malaysiana.  129-136. 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong, javad rajabi, yee ning wong.  (2014).  fabrication of cemented tungsten carbide components bymicro-powder injection moulding.  - journal of materials processing technology.  214:1436-1444. 

r.a. eshkoor, a.u. ude, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2014).  failure mechanism of woven natural silk/epoxy rectangular composite tubes under axial quasi-static crushing test using trigger mechanism.  - international journal of impact engineering.  53-61. 

s.y. heng, m.r. raza, n. muhamad, a.b. sulong, a. fayyaz.  (2014).  micro powder injection molding (upim) of tungsten carbide.  - international journal of refractory metals and hard materials.  45:189-195. 

baharuddin n.a., rahman h.a., muchtar a., sulong a.b., abdullah h..  (2014).  effects of deposition time and counter-electrode size on the fabrication of lscf-sdc carbonate composite cathode for sofc.  - sains malaysiana.  595 - 601. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2013).  yttria stabilized zirconia formed by micro ceramic injection molding: rheological properties and debinding effects on the sintered part.  - ceramics international.  39(3):2665-2674. 

qian wen yeang, sharif hussein sharif zein, abu bakar sulong, soon huat tan.  (2013).  comparison of the pervaporation performance of various types of carbon nanotube-based nanocomposites in the dehydration of acetone.  - separation and purification technology.  107:252-263. 

r.a. eshkoor, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2013).  comparative research on the crashworthiness characteristics of woven natural silk/epoxy composite tubes.  - materials and design.  47:248-257. 

shye yunn heng, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, sri yulis m. amin.  (2013).  effect of sintering temperature on the mechanical and physical properties of wc-10%co through micro-powder injection molding (mpim).  - ceramics international.  39:4457-4464. 

hendra suherman, jaafar sahari, abu bakar sulong.  (2013).  effect of small-sized conductive filler on the properties of an epoxy composite for a bipolar plate in a pemfc.  - ceramics international.  39(6):7159-7166. 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, ahmad kamal ariffin mohd ihsan, jaharah ab ghani, mohd anas mohd sabri, zainuddin zajuri, shahrum abdullah, abu bakar sulong.  (2013).  direct measurement and evaluation for mechanical engineering programme outcomes: impact on continuous improvement.  - international education studies.  161-167. 

r.a. eshkoor, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2013).  effect of trigger configuration on the crashworthiness characteristics of natural silk epoxy composite tubes.  - composites part b: engineering.  55:5-10. 

abu bakar sulong, mohd ikram ramli, seow liang hau, jaafar sahari, norhamidi muhamad, hendra suherman.  (2013).  rheological and mechanical properties of carbon nanotube/graphite/ss316l/polypropylene nanocomposite for a conductive polymer composite.  - composite: part b.  50:54-61. 

muhammad ilman hakimi chua, abu bakar sulong, mohd fazuri abdullah & norhamidi muhamad.  (2013).  optimization of injection molding and solvent debinding parameters of stainless steel powder (ss316l) based feedstock for metal injection molding.  - sains malaysiana.  42(12):1743-1750. 

hendra suherman, abu bakar sulong, jaafar sahari.  (2013).  effect of the compression molding parameters on the in-plane and through-plane conductivity of carbon nanotubes/graphite/epoxy nanocomposites as bipolar plate material for a polymer electrolyte......  - ceramics international.  39(2):1277-1284. 

royan, nishata rajendran royan; sulong, abu bakar; sahari, jaafar; suherman, hendra.  (2013).  effect of acid- and ultraviolet/ozonolysis-treated mwcnts on the electrical and mechanical properties of epoxy nanocomposites as bipolar plate applications.  - journal of nanomaterials.  Art no.717459. 

muhammed ali s. a., andanastuti muchtar, abu bakar sulong, norhamidi muhamad, edy herianto majlan.  (2013).  influence of sintering temperature on the power density of samarium-doped-ceria carbonate electrolyte composites for low-temperature solid oxide fuel cells.  - ceramics international.  39(5):5813-5820. 

nor kamaliana khamis, abu bakar sulong, baba md deros.  (2012).  a case study on peer review and lecturer evaluations in an academic setting.  - asian social science.  8(16):192-199. 

javad rajabi, norhamidi muhamad, abu bakar sulong.  (2012).  effect of nano-sized powders on powder injection molding: a review.  - microsystem technologies.  18(12):1941-1961. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2012).  yttria stabilized zirconia formed by micro ceramic injection molding: rheological properties and debinding effects on the sintered part.  - ceramics international.  2665-2674. 

eghbal hakimian, abu bakar sulong.  (2012).  analysis of warpage and shrinkage properties of injection-molded micro gears polymer composites using numerical simulations assisted by the taguchi method.  - materials and design.  42:62-71. 

mohd ikram ramli, abu bakar sulong, amir arifin, andanastuti muchtar, norhamidi muhamad.  (2012).  powder injection molding of ss316l/ha composite: rheological properties and mechanical properties of the green part.  - journal of applied sciences research.  8(11):5317-5321. 

amirhossein mansourighasri, n. muhamad, a. b. sulong.  (2012).  processing titanium foams using tapioca starch as a space holder.  - journal of materials processing technology.  212:83-89. 

tan koon tatt, norhamidi muhamad, andanastuti muchtar, abu bakar sulong, heng shye yunn.  (2012).  rheological behaviour of novel feedstock for manufacturing porous stainless steel via (mim)-psh.  - jurnal teknologi.  59:187-191. 

mohd anas mohd sabri, abu bakar sulong, fung kuon chin, jaafar sahari.  (2012).  effect of corrossion on the electrical conductivity of metals and polymer composite.  - jurnal teknologi.  59(2):81-85. 

mohd ruzi harun, norhamidi muhamad, abu bakar sulong, nor hafiez mohamad nor, khairur rijal jamaludin, mohd halimirwan ibrahim.  (2012).  solvent debinding process for zk60 magnesium alloy mim compact.  - jurnal teknologi.  59:165-169. 

saniah abdul karim, abu bakar sulong, che husna azhari, teng her lee, ng min hwei.  (2012).  optimization of electrospinning parameters using response surface methods to enhance fiber diameter, mechanical properties and orientation of nanofibers.  - journal of applied science research.  8(5):250-2517. 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong, heng shye yunn, sri yulis m. amin, javad rajabi.  (2012).  effect of dry and wet ball milling process on critical powder loading and mixture properties of fine wc-10co-0.8vc powder.  - jurnal teknologi.  59:147-150. 

abu bakar sulong, norhamidi muhamad, amir arifin, kuu bi yong.  (2012).  optimizing injection parameter of metal injection molding processes using the feedstock of 16um stainless steel powder (ss316l), peg, pmma and stearic acid.  - journal of applied sciences research.  8(6):2998-3003. 

javad rajabi, norhamidi muhamad, abu bakar sulong, abdolli fayyaz, azizah wahi.  (2012).  advantages and limitations of using nano sized powders for powdew injection molding process: a review.  - jurnal teknologi.  59:143-146. 

sulong, a.b, park, j , azhari, c.h , jusoff, k.  (2011).  process optimization of melt spinning and mechanical strength enhancement of functionalized multi-walled carbon nanotubes reinforcing polyethylene fibers.  - composites part b-engineering.  42(1):11-17. 

mohd h.i. ibrahim, norhamidi muhamad, abu b. sulong, khairur r. jamaludin, nor h.m. nor and sufizar ahmad.  (2011).  optimization of micro metal injection molding with multiple performance characteristics using grey relational grade.  - chiang mai journal of science.  38(2):231-241. 

abu bakar sulong, joohyuk park.  (2011).  alignment of multi-walled carbon nanotubes in polyethylene matrix by extrusion shaer flow: mechanical properties enhancement.  - journal of composite materials.  45(8):931-941. 

m.h.i. ibrahim, n. muhamad, a.b. sulong, k.r. jamaludin, s. ahmad and n.h.m. nor.  (2010).  optimization of micro metal injection molding for highest green strength by using taguchi method.  - international journal of mechanical and materials engineering (ijmme).  5(2):282-289. 

hendra suherman, abu bakar sulong, jaafar sahari.  (2010).  effect of filler loading concentration, curing temperature and molding pressure on the electrical conductivity of cnts/graphite/ epoxy nanocomposites at high loading of conductive fillers.  - international journal of mechanical and materials engineering.  5(1)74-79. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2010).  flow behavior characteristic for injection process using nano-yttria stabilized zirconia for micro metal injection molding.  - applied mechanics and materials.  480-484. 

ibrahim m.h.i., muhamad n., sulong a.b..  (2009).  rheological investigation of water atomised stainless steel powder for micro metal injection molding.  - international journal of mechanical and materials engineering.  4(1):1-8. 

sulong a.b., azhari c.h., zulkifli r., othman m.r., park j..  (2009).  a comparison of defects produced on oxidation of carbon nanotubes by acid and uv ozone treatment.  - european journal of scientific research.  33(2):295-304. 

rizauddin ramli, hidehiko yamamoto, abu bakar sulong, dzuraidah abdul wahab, jaber abu qudeiri.  (2009).  real-time agv action decision in ad-fms by hypothetical reasoning.  - european journal of scientific research.  25(2):310-324. 

sulong a.b., muhamad n., ghazali m.j., jaharah a.g., tan s.h., park j.h..  (2009).  functionalized mwcnts reinforced polyetehylene fiber composite: mechanical strength characterization.  - international journal of modern physics b.  23(6-7):1419-1424. 

rozli zulkifli, che husna azhari, maryam j. ghazali, ahmad rasdan ismail, abu bakar sulong.  (2009).  interlaminar fracture toughness of multi-layer woven silk/epoxy composites treated with coupling agent.  - european journal of scientific research.  27(3):454-462. 

sulong a.b., muhamad n., sahari j., ramli r., deros b.m., park j..  (2009).  electrical conductivity behaviour of chemical functionalized mwcnts epoxy nanocomposites.  - european journal of scientific research.  29(1):13-21. 

m. j. ghazali, a. a. pauzi, c. h. azhari, j. a. ghani, a. b. sulong and r. mustafa.  (2009).  effect of starch binders in alumina coatings on aisi 316 l stainless steel for medical application.  - international journal of modern physics b.  23(6-7):1034-1039. 

a. g. jaharah, c. h. che hassan, m. j. ghazali, a. b. sulong, m. z. omar, m. z.nuawi, a. r. ismail.  (2009).  performance of uncoated carbide cutting tool when machining cast iron in dry cutting condition.  - international journal of modern physics b.  23(6-7):1796-1802. 

joohyuk park and abu bakar sulong.  (2007).  effect of chemically surface modified mwnts on the mechanical and electrical properties of epoxy nanocomposites.  - studies in surface science and catalysis.  165:405-408. 

abu bakar sulung and joohyuk park.  (2007).  fabrication of carbon nanotubes reinforced polyethylene fibers by melt spinning: process optimization and mechanical strength characterization.  - advanced materials research.  26-28:289-292. 

abu bakar sulong and joohyuk park.  (2007).  dynamic thermo-mechanical properties of chemically surface modified mwcnts reinforced polymeric composites.  - advanced materials research.  26-28:285-288.