armin rajabi, peter hodgson, mariyam j. ghazali, zainuddin sajuri, alireza almaslow, hamid ahmad mehrabi, amir hossein baghdadi.  (2022).  challenges and solutions in the synthesis of nano-ticn: a review.  - ceramic international.  8921-8929. 

nurulhuda mohd, masfueh razali, mariyam jameelah ghazali, noor hayaty abu kasim.  (2022).  3d-printed hydroxyapatite and tricalcium phosphates-based scaffolds for alveolar bone regeneration in animal models: a scoping review.  - materials.  1-16. 

nurulhuda mohd, masfueh razali, mariyam jameelah ghazali, noor hayaty abu kasim.  (2022).  current advances of three-dimensional bioprinting application in dentistry: a scoping review.  - materials.  1-25. 

nilofar asim, mohd sukor suait, marzieh badiei, masita mohammad, md. akhtaruzzaman, armin rajabi, nowshad amin and mariyam jameelah ghazali.  (2022).  perspectives in biopolymer-graphene-based composite application: advances, challenges, and recommendations.  - nanotechnology reviews.  1525-1554. 

nilofar asim , marzieh badiei, masita mohammad, halim razali , armin rajabi , lim chin haw, mariyam jameelah ghazali.  (2022).  sustainability of heating, ventilation and air-conditioning (hvac) systems in buildings-an overview.  - international journal of environmental research and public health.  1-16. 

m.a. abdelgnei, m.z. omar, m.j. ghazali, m.n. mohammed.  (2022).  microstructure evaluation and mechanical properties of thixoformed al-5.7si-2cu-0.3mg aluminum alloys.  - international journal of metalcasting.  370-384. 

yusliza yusuf, mariyam jameelah ghazali, jariah mohamad juoi, toibah abd rahim, zaleha mustafa.  (2022).  plasma-sprayed tio2 coatings: hydrophobicity enhanced by zno additions.  - international journal of applied ceramic technology.  2213-2221. 

isyraf aznam, joelle c.w. mah, andanastuti muchtar, mahendra r. somalu, mariyam j. ghazali.  (2021).  electrophoretic deposition of (cu,mn,co)3o4 spinel coating on sus430 ferritic stainless steel: process and performance evaluation for solid oxide fuel cell interconnect applications.  - journal of the european ceramic society.  1360-1373. 

mariyam j. ghazali, xu ren, armin rajabi, wan fathul hakim w. zamr, nadia mohd mustafah and jing ni.  (2021).  finite element analysis of cushioned diabetic footwear using ethylene vinyl acetate polymer.  - polymer.  1-12. 

elaine zi fan soh, ohnmar htwe, amaramalar selvi naicker, armin rajabi nasirabadi, mariyam jameelah ghazali, nadia mohd mustafah, irraivan elamvazuthi, brenda saria yuliawiratman, manimalar selvinaicker.  (2020).  stepease diabetic socks: an answer to efficacious indoor foot pressure relief - a prospective study.  - journal of tissue viability.  104-109. 

zahra mahmoudi, seyed hadi tabaian, hamid reza rezaie, farzad mahboubi, mariyam jameelah ghazali.  (2020).  synthesis of ti2alc and ti3alc2 max phases by arc-pvd using tial target in c2h2/ ar gas mixture and subsequent annealing.  - ceramics international.  4968-4975. 

yusliza yusuf, mariyam jameelah ghazali, yuichi otsuka, kiyoshi ohnuma, sarita morakul, susumu nakamura, mohd fadzli abdollah.  (2020).  antibacterial properties of laser surface-textured tio2/zno ceramic coatings.  - ceramics international.  3949-3959. 

m.a. abdelgnei, m.z. omar, m.j. ghazali, m.n. mohammed, b. rashid.  (2020).  dry sliding wear behaviour of thixoformed al-5.7si-2cu-0.3 mg alloys at high temperatures using taguchi method.  - wear.  1-12. 

ahmad afiq pauzi, mariyam jameelah ghazali, wan fathul hakim w. zamri and armin rajabi.  (2020).  wear characteristics of superalloy and hardface coatings in gas turbine applications - a review.  - metals.  1-14. 

armin rajabi, mariyam jameelah ghazali, intan fadhlina mohamed, norhamidi muhamad.  (2020).  novel precursor of nitrogen for the synthesis of tic0.7n0.3 through vacuum oven-induced combustion.  - ceramics international.  9271-9280. 

armin rajabi, mariyam jameelah ghazali, ebrahim mahmoudi, amir hossein baghdadi, abdul wahab mohammad, nadia mohd mustafah, htwe ohnmar, amaramalar selvi naicker.  (2019).  synthesis, characterization, and antibacterial activity of ag2o-loaded polyethylene terephthalate fabric via ultrasonic method.  - nanomaterials.  450-462. 

juyana abdul wahab, mariyam jameelah ghazali.  (2019).  erosion resistance of laser textured plasma-sprayed al2o3-13%tio2 coatings on mild steel.  - wear.  2029-2037. 

noor faeizah amat, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali, norziha yahaya.  (2019).  effect of sintering temperature on the aging resistance and mechanical properties of monolithic zirconia.  - journal of materials research technology.  1092-1101. 

hasrawati abu hassan, mariyam jameelah ghazali, cevdet meric, che husna azhari.  (2019).  wettability effect of the surface morphologies of musa acuminata leaves.  - bioresources.  8331-8344. 

dinesh ragurajan, mohsen golieskardi, meenaloshini satgunam, md enamul hoque, angela min hwei ng, mariyam jameelah ghazali, ahmad kamal ariffin.  (2018).  advanced 3y-tzp bioceramic doped with al2o3 and mno2 particles potentially for biomedical applications: study on mechanical and degradation properties.  - journal of materials research and technology.  . 

kin yuen leong, idayu razali, k.z. ku ahmad, hwai chyuan ong, m.j. ghazali, mohd rosdzimin abdul rahman.  (2018).  thermal conductivity of an ethylene glycol/water-based nanofluid with copper-titanium dioxide nanoparticles: an experimental approach.  - international communications in heat and mass transfer.  23-28. 

a. jemat, m.j. ghazali, m. razali, y. otsuka, a. rajabi,.  (2018).  effects of tio2 on microstructural, mechanical properties and in-vitro bioactivity of plasma sprayed yttria stabilised zirconia coatings for dental application.  - ceramics international.  4271-4281. 

a.rajabi, m.j. ghazali, e. mahmoudi, s. azizkhani, n.h. sulaiman, a.w. mohammad, n.m. mustafah, h. ohnmar, a.s. naicker.  (2018).  development and antibacterial application of nanocomposites: effects of molar ratio on ag2o-cuo nanocomposite synthesised via the microwave-assisted route.  - ceramics international.  21591-21598. 

isyraf aznam, joelle chia wen mah, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali..  (2018).  a review of key parameters for effective electrophoretic deposition in the fabrication of solid oxide fuel cells.  - journal of zhejiang university: science a.  . 

noor faeizah amat, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali and norziha yahaya.  (2018).  preparation of presintered zirconia blocks for dental restorations through colloidal dispersion and cold isostatic pressing.  - ceramics international.  6409-6416. 

n.h. sulaiman, m.j. ghazali, j. yunas, a. rajabi, b.y. majlis, m. razali.  (2018).  synthesis and characterization of cafe2o4 nanoparticles via co-precipitation and auto-combustion methods.  - ceramic international.  46-50. 

bushra rashid, zulkiflle leman, mohammad jawaid, mariyam jameelah ghazali, mohamad ridzwan ishak.  (2017).  influence of treatments on the mechanical and thermal properties of sugar palm fibre reinforced phenolic composites.  - bioresources.  1447-1462. 

b rashid, z leman, m jawaid, mj ghazali, mr ishak.  (2017).  effect of treatments on the physical and morphological properties of spf/phenolic composites.  - journal of natural fibers.  1-13. 

nidal w. elshereksi, mariyam jameelah ghazali, andanastuti muchtar, che husna azhari.  (2017).  studies on the effects of titanate and silane coupling agents on the performance of poly (methyl methacrylate)/barium titanate denture base nanocomposites.  - journal of dentistry.  121-132. 

j. a. wahab,m. j. ghazali, z. sajuri, y. otsuka, m. jayaprakash, s. nakamura, a. f. s. baharin.  (2017).  effects of micro-grooves on tribological behaviour of plasma-sprayed alumina-13%titania coatings.  - ceramic international.  6410-6416. 

armin rajabi, mariyam j. ghazali.  (2017).  quantitative analyses of tic nanopowders via mechanical alloying method.  - ceramics international.  14233-14242. 

joelle c.w. mah, andanastuti muchtar, mahendra rao somalu, mariyam j. ghazali.  (2017).  metallic interconnects for solid oxide fuel cell: a review on protective coating and deposition techniques.  - international journal of hydrogen energy.  9219-9229. 

b rashid, z leman, m jawaid, mj ghazali, mr ishak, ma abdelgnei.  (2017).  dry sliding wear behavior of untreated and treated sugar palm fiber filled phenolic composites using factorial technique.  - wear.  26-35. 

bushra rashid, mohammed zulkiflle leman, mohammad jawaid, mariyam jameelah ghazali, mohamad ridzwan ishak.  (2017).  dynamic mechanical analysis of treated and untreated sugar palm fibre-based phenolic composites.  - bioresources.  3448-3462. 

ky leong, kz ku ahmad, hwai chyuan ong, mj ghazali, azizah baharum.  (2017).  synthesis and thermal conductivity characteristic of hybrid nanofluids: a review.  - renewable & sustainable energy reviews.  868-878. 

sh hamdan, wwf chong, j-h ng, mj ghazali, rjk wood.  (2017).  influence of fatty acid methyl ester composition on tribological properties of vegetable oils and duck fat derived biodiesel.  - tribology international.  76-82. 

joelle c.w. mah, andanastuti muchtar, mahendra r. somalu, mariyam j. ghazali, jarot raharjo.  (2017).  formation of sol-gel derived (cu,mn,co)3o4 spinel and its electrical properties.  - ceramics international.  7641-7646. 

k.s. alhawari, m.z. omar, m.j. ghazali, m.s. salleh, m.n. mohammed.  (2017).  microstructural evolution during semisolid processing of al-si-cu alloy with different mg contents.  - transactions of nonferrous metals society of china.  1483-1497. 

mohd fadzli bin abdollah, noritsugu umehara, mariyam jameelah binti ghazali and mohamed el mansori.  (2016).  introduction-advances and challenges in carbon-based tribomaterials.  - journal of materials research.  1. 

ping chuan siow, jaharah abdul ghani, che hassan che haron, mariyam jameelah ghazali and talib ria jaafar.  (2016).  effect of carbon content in ticxn1
x coating on the adhesivity of carbide cutting tools and machining performance.  - journal of material research.  1880-1884. 

j. a. wahab, m. j. ghazali, w. m. w. yusoff and z. sajuri.  (2016).  enhancing material performance through laser surface texturing: a review.  - transactions of the imf.  193-198. 

m.j. ghazali, s.m. forghani, n. hassanuddin, a. muchtar, a.r.daud.  (2016).  comparative wear study of plasma sprayed tio2 and al2o3-tio2 on mild steels.  - tribology international.  681-686. 

d. ragurajan, m. satgunam, m. golieskardi, a.k. ariffin and m.j. ghazali.  (2016).  effect of air sintering on microstructural and mechanical properties of aluminum oxide / manganese oxide doped y- tzp.  - journal of the australian ceramic society.  128-133. 

bushra rashid, zulkiflle leman, mohammad jawaid, mariyam jameelah ghazali and mohamad ridzwan ishak.  (2016).  the mechanical performance of sugar palm fibres (ijuk) reinforced phenolic composites.  - international journal of precision engineering and manufacturing.  1001-1008. 

bushra rashid, z. leman, m. jawaid, m. j. ghazali, m. r. ishak.  (2016).  physicochemical and thermal properties of lignocellulosic fiber from sugar palm fibers: effect of treatment.  - cellulose.  2905-2916. 

k.s. alhawari, m.z. omar, m.j. ghazali, m.s. salleh, m.n. mohammed.  (2015).  evaluation of the microstructure and dry sliding wear behaviour of thixoformed a319 aluminium alloy.  - materials and design.  169-180. 

karim z., nuawi m.z., ghani j.a., ghazali m.j., abdullah s., mansor n.i.i..  (2015).  sliding wear evaluation of aluminum alloy (7075-t6) on hardened steel (aisi4340) via non-contact technique by i-kaz™ multi-level analysis.  - wear.  99-104. 

rajabi a., ghazali m.j., daud a.r..  (2015).  chemical composition, microstructure and sintering temperature modifications on mechanical properties of tic-based cermet : a review.  - materials & design.  95-106. 

a. rajabi, m.j. ghazali, j. syarif , a.r. daud.  (2014).  development and application of tool wear: a review of the characterization of tic-based cermets with different binders.  - chemical engineering journal.  255: 445-452. 

s.m. forghani, mj ghazali, a. muchtar, a.r. daud.  (2014).  mechanical properties of plasma sprayed nanostructured tio2 coatings on mild steel.  - ceramics international.  40 (2014):7049-7056. 

noor faeizah amat, andanastuti muchtar, mariyam jameelah ghazali, norziha yahaya.  (2014).  suspension stability and sintering influence on yttria-stabilized zirconia fabricated by colloidal processing.  - ceramics international.  40(4):5413-5419. 

ping chuan siow, jaharah a. ghani, mariyam jameelah ghazali, talib ria jaafar, mohamad asri selamat, che hassan che haron.  (2013).  characterization of ticn and ticn/zrn coatings for cutting tool application.  - ceramics international.  39(4):1293-1298. 

a. almaslow, m.j. ghazali, r.j. talib, c.t. ratnam, c.h. azhari.  (2013).  effects of epoxidized natural rubber-alumina nanoparticles (enran) composites in semi-metallic brake friction materials.  - wear.  302:1392-1396. 

k.a. zakaria, s. abdullah, m.j. ghazali.  (2013).  comparative study of fatigue life behaviour of aa6061 and aa7075 alloys under spectrum loadings.  - materials and design.  49:48-57. 

k.a. zakaria, s. abdullah, m.j. ghazali, c.h. azhari.  (2013).  influence of spectrum loading sequences on fatigue life in a high-temperature environment.  - engineering failure analysis.  30:111-123. 

s.m. forghani, m.j. ghazali, a. muchtar, a.r. daud, n.h.n. yusoff, c.h. azhari.  (2013).  effects of plasma spray parameters on tio2-coated mild steel using design of experiment (doe) approach.  - ceramics international.  39(3):3121-3127. 

n.h.n. yusoff, m.j. ghazali, m.c. isa, a.r. daud, a. muchtar.  (2013).  effects of powder size and metallic bonding layer on corrosion behaviour of plasma-sprayed al2o3-13% tio2 coated mild steel in fresh tropical seawater.  - ceramics international.  39(3):2527-2533. 

m.j. ghazali, n.i.i. mansor, m.z. nuawi, j.a. ghani.  (2013).  facile wear failure monitoring of commercial bearing alloys using i-kaz method.  - engineering failure analysis.  35:545-553. 

a. almaslow, c.t. ratnam, m.j. ghazali, r.j. talib, c.h. azhari.  (2013).  effects of electron-beam and sulfur crosslinking of epoxidized natural rubber on the friction performance of semimetallic friction materials.  - composites part b: engineering.  54:377-382. 

n.h.n. yusoff, m.j. ghazali, m.c. isa, a.r. daud, a. muchtar, s.m. forghani.  (2012).  optimization of plasma spray parameters on the mechanical properties of agglomerated al2o3-13%tio2 coated mild steel.  - materials & design.  39:504-508. 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali.  (2012).  stress intensity factors for surface cracks in round bar under single and combined loadings.  - meccanica.  47:1141-1156. 

j.a. ghani, m. rizal, m.z. nuawi, m.j. ghazali, c.h.c. haron.  (2011).  monitoring online cutting tool wear using low-cost technique and user-friendly gui.  - wear.  271(9-10):2619? 2624. 

mohamad, n; muchtar, a; ghazali, mj; mohd, dhj; azhari, ch.  (2010).  epoxidized natural rubber-alumina nanoparticle composites: optimization of mixer parameters via response surface methodology.  - journal of applied polymer science.  115(1):183-189. 

anasyida a.s., daud a.r., ghazali m.j..  (2010).  dry sliding wear behaviour of al-12si-4mg alloy with cerium addition.  - materials and design.  31(1):365-374.