ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;dzuraidah binti abd wahab;rizauddin bin ramli;zainuddin bin sajuri;hawa binti hishamuddin;mohammad rasidi bin mohammad rasani;wan fathul hakim bin w. zamri;wan aizon bin w ghopa;abdul hadi bin azman;.  (2023).  reliability and safety engineering and technology for large maritime engineering systems (reset).  - .  . 

salvinder singh a/l karam singh;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;azli bin arifin;abdul hadi bin azman.  (2023).  formulation of reliability life cycle for lattice open and closed cell structures under strain loading spectrum.  - .  . 

abdul hadi bin azman;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;dzuraidah binti abd wahab.  (2023).  mechanical properties and configurations of conformal lattice structures for lightweight parts in the automotive industry .  - .  . 

nurbiha abd shukor, muhammad helmi norman, ahmad kamal ariffin mohd ihsan,, nor rajaie hashim, nurul nadiah ibrahim.  (2023).  laporan pendigitalan pengajaran dan pembelajaran pendidikan tinggi 2023.  - .  342. 

dzuraidah binti abd wahab;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;rizauddin bin ramli;hawa binti hishamuddin;abdul hadi bin azman.  (2023).  analysis of geometric complexities and design configuration for restoration of remanufacturable components using additive manufacturing..  - .  . 

abdul hadi bin azman;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;dzuraidah binti abd wahab;mohd yazid bin bajuri.  (2023).  topology optimisation design framework for customised prostheses fabricated using additive manufacturing.  - .  . 

setia erlila refman adrus, noorhelyna razali, ahmad kamal ariffin, lilia halim.  (2023).  pendidikan perubahan iklim melalui realiti terimbuh.  - impak: kluster transformati sosial & ekonomi siri 1.  50-51. 

lennie abdullah, salvinder singh karam singh, shahrum abdullah, ahmad kamal ariffin, syifa syuhaidah meor zainal.  (2023).  fatigue reliability characterisation of effective strain damage model using extreme value distribution for road load conditions.  - materials.  1-22. 

setia erlila refman adrus, noorhelyna razali, ahmad kamal ariffin, lilia halim.  (2023).  teknologi realiti terimbuh sebagai media pembelajaran perubahan iklim di malaysia.  - persidangan penyelidikan pendidikan kejuruteraan dan alam bina 2023 (peka 2023).  19-20. 

syahiir kamil, mohamad syazwan zafwan mohamad suffian, ahmad kamal ariffin, abdul hadi azman.  (2023).  numerical analysis of structural batteries response with the presence of uncertainty.  - jurnal kejuruteraan.  1329-1339. 

c.h. chin, s. abdullah a, s.s.k. singh, d. schramm, a.k. ariffin.  (2023).  strain generation for fatigue-durability predictions considering load sequence effect of random vibration loading.  - international journal of fatigue.  1-18. 

c.h. chin, s. abdullah, s.s.k. singh, a.k. ariffin, d. schramm.  (2023).  on the need to evaluate the probabilistic of fatigue life assessment of random strain loading considering load sequence effects.  - engineering failure analysis.  1-17. 

saeed h. moghtaderi, alias jedi, ahmad kamal ariffin.  (2023).  a review on nonlocal theories in fatigue assessment of solids.  - materials.  1-29. 

n.s. suhaimi, m.i.m. ahmad, m.z. nuawi, a.k. ariffin, a.z.m. abdullah.  (2023).  structural condition assessment based strain-stress behaviour for railway welded rail joint using rosette fibre bragg grating optical sensor.  - results in engineering.  1-12. 

c.h.chin, s.abdullah, s.s.k.singh, a.k.ariffin, d.schramm.  (2023).  fatigue life modelling of steel suspension coil springs based on wavelet vibration features using neuro-fuzzy methods.  - materials.  1-30. 

l. abdullah , s. s. k. singh , s. abdullah, a. h. azman, a. k. ariffin.  (2023).  fatigue characterization under effective strain damage model on various road load conditions.  - journal of failure analysis and prevention.  529-539. 

mohamad syazwan zafwan mohamad suffian, syahiir kamil, ahmad kamal ariffin.  (2022).  uncertainty analysis of varied meshes of a finite element model using monte carlo simulation.  - international journal of structural integrity.  907-921. 

a.d.h. agosmustaram, m.i.m. ahmad, n.s. suhaimi, m.z.nuawi, z.m. hafizi, a.k. ariffin, a.z.m. abdullah.  (2022).  monitoring for strain-based railway structure assessment approach using optical fiber sensor.  - 6th international conference on recent advances in automotive engineering & mobility research (recar) 2022.  1-12. 

intan fadhlina binti mohamed;ahmad kamal ariffin bin mohd ihsan;mariyam jameelah binti ghazali;abu bakar bin sulong;wan fathul hakim bin w. zamri.  (2022).  extra superplasticity of aa2618 alloy processed by high-pressure torsion.  - .  . 

noorhelyna binti razali;ahmad kamal ariffin bin mohd ihsan;haliza binti othman;zulkifli bin mohd nopiah;nuryazmin binti ahmat zainuri;nurfaradilla binti mohamad nasri;haryanti binti mohd affandi;nazatul aini bte abd majid.  (2022).  integrating augmented reality in problem based learning environment to enhance the performance in engineering mathematics courses.  - .  . 

dzuraidah binti abd wahab;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;rizauddin bin ramli;abdul hadi bin azman.  (2022).  designing remanufacturable cores for repair and restoration using additive manufacturing technology.  - .  . 

azli bin arifin;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;salvinder singh a/l karam singh.  (2022).  kesan kaitan peningkatan nisbah tegasan kepada pertumbuhan retak lesu dan kebocoran fluks magnet.  - .  . 

t prakash g. thamburaja;ahmad kamal ariffin bin mohd ihsan;mohammad rasidi bin mohammad rasani.  (2022).  a novel element birth/erosion-based implicit finite-element framework for brittle elastic materials.  - .  . 

norhamidi bin muhamad;che hassan bin che haron;ahmad kamal ariffin bin mohd ihsan;jaharah bt. a ghani;abu bakar bin sulong.  (2022).  parameter study of metal injection moulding and machining of titanum alloy.  - .  . 

iszan hana kaharudin, mohammad syuhaimi ab-rahman, roslan abd-shukor, azami zaharim, mohd jailani mohd nor, ahmad kamal ariffin mohd ihsan, shahrom md zain, afiq hipni, kamisah osman, ruszymah idrus.  (2022).  how does supervision technique affect research? towards sustainable performance: publication and students from pure and social sciences.  - sustainability.  1-18. 

roslee rajikan, azmul fahimi kamaruzaman, norinsan kamil othman, mohd azman abas, ahmad kamal ariffin mohd ihsan, norizan abd razak, khairul nizam abdul maulud, mohd adib ibrahim, hj. zanudin mohd daud, muhammad rahimi yusop, basir bahir, sharifah zarina.  (2022).  pelan strategik kelestarian universiti kebangsaan malaysia 2030 membudayakan kelestarian masa hadapan.  - pelan strategik kelestarian universiti kebangsaan malaysia 2030 membudayakan kelestarian masa hadapan.  1-55. 

c. h. chin, s. abdullah, s. s. k. singh, a. k. ariffin & d. schramm.  (2022).  probabilistic-based fatigue reliability assessment of carbon steel coil spring from random strain loading excitation.  - journal of mechanical science and technology.  109-118. 

c. h. chin, s. abdullah, a. g. yin & a. k. ariffin.  (2022).  vibration fatigue analysis through frequency response function of variable amplitude loading.  - journal of mechanical science and technology.  33-43. 

nur shufinah suhaimi, meor iqram meor ahmad, mohd zaki nuawi, ahmad kamal ariffin mohd ihsan, nordin jamaludin, nur azam abdullah.  (2022).  a review on modes of failure of rail track structure in railway transportation.  - asean journal of engineering and technology.  7-18. 

n.s. suhaimi, m.i.m. ahmad, m.z.nuawi, z.m. hafizi, a.k. ariffin, a.z.m. abdullah.  (2022).  determination of train vehicle speed using fibre bragg grating sensors for railway application.  - 6th international conference on recent advances in automotive engineering & mobility research, recar 2022.  1-12. 

azli arifin, shahrum abdullah, ahmad kamal ariffin, nordin jamaludin, and salvinder singh karam singh.  (2022).  stress ratio effect on fatigue crack growth rate based on magnetic flux leakage parameters.  - 20th international colloquium on mechanical fatigue of metals.  275-281. 

a. arifin , s. abdullah , a.k. ariffin , n. jamaludin , s.s.k. singh.  (2022).  characterising the stress ratio effect for fatigue crack propagation parameters of sae 1045 steel based on magnetic flux leakage.  - theoretical and applied fracture mechanics.  1-11. 

mohd suhaimi mohamad, siti nora mhd isa, roslee rajikan, ahmad kamal ariffin mohd ihsan, norinsan kamil othman, shazli ezzat ghazali, nasharuddin zainal, fatimah wati halim, mohd adib ibrahim, mohd izham mohd hamzah, raihanah mohd mydin, rozilawati razali.  (2022).  kamus kompetensi kepimpinan.  - .  1-59. 

nur shufinah suhaimi, meor iqram meor ahmad, mohd. zaki nuawi, ahmad kamal ariffin, nordin bin jamaludin, nur azam abdullah.  (2022).  a review on modes of failure of rail tracks structure in railway transportation.  - proceedings of the 2nd virtual conference on computational and experimental mechanics (vccem 2021).  99-100. 

b.t. loom, w.f.h.w. zamri, a.k. ariffin, m.f. md din, a. shamsudeen.  (2022).  angular contact ball bearing modeling with different types of coatings.  - international journal of engineering and advanced technology.  92-97. 

n shieela kalib, a muchtar, v zhen yuan, m rao somalu and a kamal ariffin mohd ihsan.  (2022).  thermal investigation of solid oxide fuel cell ni-ysz anode supported with cooling system: a fem approach.  - iop conference series: materials science and engineering.  1-6. 

mohammad syuhaimi ab-rahman, i-shyan hwang, abdul rahman mohd yusoff, abdul wahab mohamad, ahmad kamal ariffin mohd ihsan, juwairiyyah abdul rahman, mohd jailani mohd nor and iszan hana kaharudin.  (2022).  a global program-educational-objectives comparative study for malaysian electrical and electronic engineering graduates.  - sustainability.  1-29. 

setia erlila refman adrus, noorhelyna razali, ahmad kamal ariffin, alias jedi, lilia halim.  (2022).  kurikulum & instruksi siri 13.  - .  7. 

m.a.i. syauqi, m.i.m ahmad, n.s. suhaimi, m.z.nuawi, z.m. hafizi, a.k. ariffin, a.z.m. abdullah.  (2022).  strain-stress behaviour investigation on railway track based on the fbg wavelength shifting: rectangular rosette configuration.  - 6th international conference on recent advances in automotive engineering & mobility research (recar) 2022.  1-14. 

ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;zulkifli bin mohd nopiah;dzuraidah binti abd. wahab.  (2021).  reliability formulation of fatigue life assessment for powder-bed laser-fused materials.  - .  . 

c. h. chin, s. abdullah, s. s. k. singh, a. k. ariffin & d. schramm.  (2021).  computing low-frequency vibration energy with hölder singularities as durability predictive criterion of random road excitation.  - soft computing.  6469-6487. 

salvinder singh a/l karam singh;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;azli bin arifin.  (2021).  establishing educational design ideation expert system in reliability based design optimization assessment for automotive components.  - .  . 

zainuddin bin sajuri;ahmad kamal ariffin bin mohd ihsan;mohd. zaidi bin omar;shahrum bin abdullah.  (2021).  computationally inverse model for the fatigue and fracture characterization of structural steel materials in corrosive environment.  - .  . 

leong chee yau, wan fathul hakim w. zamri, muhammad faiz md din, ahmad kamal ariffin, intan fadhlina mohamed.  (2021).  influences of coefficient of frictions on the contact behavior for ball bearings.  - solid state technology.  4387-4394. 

helmi norman, ahmad kamal ariffin mohd ihsan, azmin sham rambely, rozli zulkifli.  (2021).  alternative assessment in higher education: a practical guide to assessing learning.  - .  11. 

ahmad kadri junoh, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan.  (2021).  hingar : penilaian pengoptimuman dalam sektor automotif.  - .  181. 

l. abdullah, s.s.k. singh, s. abdullah, a.h. azman, a.k. ariffin.  (2021).  fatigue reliability and hazard assessment of road load strain data for determining the fatigue life characteristics.  - engineering failure analysis.  1-14. 

meor iqram meor ahmad, nur shufinah suhaimi, mohd zaki nuawi, ahmad kamal ariffin, nordin jamaludin and azam abdullah.  (2021).  a review on modes of failure of rail tracks structure in railway transportation..  - virtual conference computational and experimental mechanics 2021.  1-19. 

ramzi adriman, israr bin m. ibrahim, syifaul huzni, syarizal fonna, ahmad kamal ariffin.  (2021).  improving half-cell potential survey through computational inverse analysis for quantitative corrosion profiling.  - case studies in construction materials.  1-13. 

mahammadsalman warimani, muhammad hanafi azami, sher afghan khan, ahmad faris ismail, sanisah saharina, ahmad kamal ariffin.  (2021).  internal flow dynamics and performance of pulse detonation engine with alternative fuels.  - energy.  1-10. 

syahril amir mohd, kok beng gan, ahmad kamal ariffin.  (2021).  development of medical drone for blood product delivery: a technical assessment.  - international journal of online and biomedical engineering.  183-196. 

c.h. chin, s. abdullah, s.s.k. singh, d. schramm, a.k. ariffin.  (2021).  durability prediction of coil spring through multibody-dynamics-based strain generation.  - mechanical systems and signal processing.  580-601. 

c. h. chin, s. abdullah, s. s. k. singh, a. k. ariffin and d. schramm.  (2021).  neuro-fuzzy fatigue life assessment using the wavelet-based multifractality parameters.  - journal of mechanical science and technology.  439-447. 

u. bhardwaj, a.p. teixeira, c. guedes soares, a.k. arifin, s.s. singh.  (2021).  evidence based risk analysis of fire and explosion accident scenarios in fpsos.  - reliability engineering & system safety.  1-16. 

n.j. suang, w.f.h. w. zamri, m.f.m. din, a. shamsudeen, i. f. mohamed, a.k. ariffin.  (2021).  effects of layer addition on hardness of a multi-layered tialn and tin coating.  - solid state technology.  7339-7351. 

a h azman, s abdullah, s s k singh, m r m yazid, w a w ghopa, h hisamuddin, a h shahrir, a k ariffin, d a wahab, a azhar and m s solah.  (2020).  assessing the safety of express bus from passengers' perspective.  - iop conference series: materials science and engineering.  1-8. 

shahrum abdullah, azli arifin, ahmad kamal ariffin mohd ihsan dan sity ainy nor mohamed.  (2020).  mekanik komputeran: eksperimen, model dan simulasi.  - .  15. 

mohamamad rasidi rasani, wan fathul hakim wan zambri, meor iqram meor ahmad, ahmad kamal ariffin mohd ihsan.  (2020).  mekanik komputeran: eksperimen model dan simulasi.  - .  183. 

leong chee yau, wan fathul hakim w. zamri, intan fadhlina mohamed, ahmad kamal ariffin, muhammad faiz md din.  (2020).  an elasto-plastic ball bearing contact with bilinear hardening.  - international journal of innovative technology and exploring engineering.  438-445. 

abdul hadi azman, salvinder singh karam singh, shahrum abdullah, wan aizon w ghopa, hawa hishamuddin, muhamad razuhanafi mat yazid, dzuraidah abd wahab, ahmad kamal ariffin mohd ihsan.  (2020).  safety index mapping system for express bus, international science technology and engineering expo 2020.  - safety index mapping system for express bus, international science technology and engineering expo 2020.  1. 

mohammad rasidi rasani, wan fathul hakim w. zamri, meor iqram meor ahmad, ahmad kamal ariffin mohd ihsan.  (2020).  mekanik komputeran:eksperimen model dan simulasi.  - .  185. 

ahmad kamal ariffin, yazrina yahya, saipulizam a. ghani, hazrul abdul halim, nastura nasir, mas aliza abu, wan noor hayati wan ismail.  (2020).  perubahan kaedah mengajar dalam masa pandemik.  - penerbitan video covid-19.  1-2. 

ahmad kamal ariffin, yazrina yahya, saipulizam a. ghani, hazrul abdul halim, nastura nasir, mas aliza abu, jasril amry abd wahid.  (2020).  pembelajaran di rumah ketika pkp.  - video covid-19.  1-2. 

ahmad kamal ariffin mohd ihsan dan azmin sham rambely.  (2020).  knovasi2020: pembelajaran aktif memperkasa kebolehpasaran graduan universiti.  - lensa ipt di tv1.  . 

ahmad kamal ariffin, muhammad ihsan, muhammad ridha & meor iqram meor ahmad.  (2020).  mekanik komputeran: ekperimen model dan simulasi.  - .  12. 

s.s.k. singh , s. abdullah, a.k. ariffin.  (2020).  fatigue reliability assessment in time domain using stochastic- induced random stress loads due to limited experimental data.  - engineering failure analysis.  1-15. 

gan kok beng;ahmad kamal ariffin bin mohd ihsan;nor azlin binti mohd nordin;devinder kaur a/p ajit singh;chai siaw chui;rosmina jaafar.  (2020).  upper extremity personalized biomechanical model for stroke survivors using wearable sensors.  - .  . 

c.h. chin, s. abdullah, s.s.k. singh, a.k. ariffin, d. schramm.  (2020).  durability assessment of suspension coil spring considering the multifractality of road excitations.  - measurement.  1-14. 

ahmad kamal ariffin, azmin sham rambely, rozli zulkifli, raihanah mohd. mydin, muhammad helmi norman, sufeera rahmad, muhammad fahmi mike abdullah, raja norlilawati raja muda, nur fadzilla yusoff.  (2020).  laporan pelaksanaan pembelajaran aktif ukm sem 1 20192020.  - .  1-85. 

mohammed suleman aldlemy, mohammad rasidi rasani, a. k. ariffin, t. m. y. s. tuan ya.  (2020).  adaptive mesh refinement immersed boundary method for simulations of laminar flows past a moving thin elastic structure.  - journal of hydrodynamics.  148-160. 

lennie abdullah, salvinder singh karam singh, shahrum abdullah, abdul hadi azman, ahmad kamal ariffin and yat sheng kong.  (2020).  the needs of power spectral density in fatigue life prediction of heavy vehicle leaf spring.  - journal of mechanical science and technology.  2341-2346. 

muhamad isyraf bin aznam, wan fathul hakim w zamri, ahmad kamal ariffin, muhammad faiz md din, intan fadhlina mohamed, guanyu deng.  (2020).  the effect of tialn-based and alcrn-based coatings towards mechanical properties on punch tools using finite element method.  - jurnal tribologi.  65-79. 

shahrum abdullah, salvinder singh karam singh, abdul hadi azman, muhamad razuhanafi mat yazid, hawa hishamuddin, wan aizon wan ghopa, aini hazwani shahrir, ahmad kamal ariffin mohd ihsan, dzuraidah abd. wahab.  (2020).  assessing the safety behaviour of the bus express driving condition from the passengers perspective.  - international journal of integrated engineering.  27-33. 

s s k singh, s abdullah, a h azman, n n m nasir, m r m yazid, h hishamuddin, w a w ghopa, a k ariffin, d a wahab, a h shahrir, a azhar and m s solah.  (2020).  responsibility of the bus operator in terms of safety and health: a malaysian case study.  - iop conference series: materials science and engineering.  1-8. 

c. h. chin, s. abdullah, s. s. k. singh, d. schramma. k. ariffin, and n. n. m. nasir.  (2019).  compression of strain load history using holder exponents of continuous wavelet transform.  - proceedings of the 7th international conference on fracture fatigue and wear.  . 

shahrum abdullah, ahmad kamal ariffin, salvinder singh karam singh, noorhelyna razali, muhamad alias md. jedi, meor iqram meor ahmad.  (2019).  proceedings of numerical analysis in engineering 2019.  - proceedings of numerical analysis in engineering 2019.  1-127. 

lennie abdullah, salvinder singh karam singh, abdul hadi azman, shahrum abdullah, ahmad kamal ariffin mohd ihsan and yat sheng kong.  (2019).  fatigue life-based reliability assessment of a heavy vehicle leaf spring.  - international journal of structural integrity.  726-736. 

c. h. chin, s. abdullah, s. s. k. singh, d. schramm, a. k. ariffin, a. a. a. rahim.  (2019).  durability assessment for random load signal of automobile suspension spring force using multibody dynamics.  - international journal of advanced control and automation system.  13-19. 

sinan q. salih, mohammed suleman aldlemy, mohammad rasidi rasani, a. k. ariffin, tuan mohammad yusoff shah tuan ya, nadhir al-ansari, zaher mundher yaseen & kwok-wing chau.  (2019).  thin and sharp edges bodies-fluid interaction simulation using cut-cell immersed boundary method.  - engineering applications of computational fluid mechanics.  860-877. 

c.h. chin, s. abdullah, s.s.k. singh, a.k. ariffin, d. schramm.  (2019).  multifractal analysis for durability predictive criterion of suspension coil spring signal.  - proceedings of mechanical engineering research day.  139-141. 

m.z. umar, v. vavilov, h. abdullah, a.k. ariffin.  (2019).  quantitative study of local heat sources by ultrasonic infrared thermography: an approach for estimating total energy released by low energy impact damage in c/c composite.  - composites part b.  167-173. 

dzuraidah binti abd. wahab;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;azli bin arifin.  (2019).  a new durability analysis for efficient usage of automotive components in multiple life cycles for environmental sustainability.  - .  1-5. 

mohammad rasidi rasani, ahmad kamal ariffin, musa bashir, jin wang.  (2019).  effect of location in a cylinder wake on dynamics of a flexible energy harvesting plate.  - journal of advanced research in fluid mechanics and thermal sciences.  189-198. 

n.i.i. mansor, s. abdullah, a.k. ariffin.  (2019).  effect of loading sequences on fatigue crack growth and crack closure in api x65 steel.  - marine structures.  . 

siti sarah januri, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, shahrum abdullah.  (2019).  the analysis of fatigue lifetime using markov chain model based on randomization paris law equation.  - international journal of innovative technology and exploring engineering.  282-286. 

mohammad rasidi rasani, hazim moria, michael beer, ahmad kamal ariffin.  (2019).  vibration performance of a flow energy converter behind two side-by-side cylinders.  - journal of marine science and engineering.  1-14. 

abdul hadi azman, wan aizon w ghopa, hawa hishamuddin, salvinder singh karam singh, muhamad razuhanafi mat yazid, dzuraidah abd. wahab, shahrum abdullah, ahmad kamal ariffin mohd ihsan.  (2019).  community awareness & education on express bus safety based on ir 4.0 technologies.  - .  1. 

abdul hadi azman, salvinder singh karam singh, wan aizon w ghopa, hawa hishamuddin, muhamad razuhanafi mat yazid, shahrum abdullah, dzuraidah abd. wahab, ahmad kamal ariffin mohd ihsan.  (2019).  driver behaviour characterisation for express bus safety enhancement using smart safety index mapping system.  - the international innovation, invention & designcompetition reinventing the fundamentals proceeding.  80. 

salvinder singh karam singh, abdul hadi azman, wan aizon w ghopa, hawa hishamuddin, muhamad razuhanafi mat yazid, shahrum abdullah, dzuraidah abd. wahab, ahmad kamal ariffin mohd ihsan, mohd syazwan solah, azhar hamzah.  (2019).  smart safety index mapping system for express bus.  - .  1. 

muhamad isyraf bin aznam, wan fathul hakim w zamri, muhammad faiz md din, intan fadhlina mohamed, guanyu deng, ahmad kamal ariffin mohd ihsan.  (2019).  simulation of nanoindentation on thin single layers of tialn and alcrn for piercing and blanking tools.  - 22nd international conference on advances in materials & processing technologies.  130. 

mohammed suleman aldlemy, mohammad rasidi rasani, t. m. y. s. tuan, ahmad kamal ariffin.  (2019).  dynamic adaptive mesh refinement of fluid-structure interaction using immersed boundary method with two-stage corrections.  - scientia iranica transactions b: mechanical engineering.  2827-2838. 

wan fathul hakim w zamri, ng jie suang, intan fadhlina mohamed, ahmad kamal ariffin, muhammad faiz md din.  (2019).  modelling of nanoindentation of tialn and tin thin film coatings for automotive bearing.  - international journal of recent technology and engineering (ijrte).  7197-7199. 

muhamad isyraf bin aznam, wan fathul hakim w zamri, ahmad kamal ariffin, muhammad faiz md din, intan fadhlina mohamed, guanyu deng.  (2019).  the effect of tialn-based and alcrn-based coatings towards mechanical properties on punch tools.  - 6th international conference on advanced processes and systems in manufacturing (apsim 2019).  28. 

wan fathul hakim w. zamri & ahmad kamal arifin.  (2018).  aktiviti pembelajaran luar bilik kuliah: sesi keseronokan dan kecergasan bagi pelajar kursus kaedah unsur terhingga.  - k-novasi 2018 | pendidikan 4.0 : graduan kalis masa hadapan.  1. 

noor shieela kalib, andanastuti muchtar, mahendra rao somalu, ahmad kamal ariffin mohd ihsan, nurul ashikin mohd nazrul aman, nurul akidah baharuddin.  (2018).  factors influencing thermal stress development in solid oxide fuel cells.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

a.h. azman, s.s.k. singh , w.g.w. aizon, h. hishamuddin, m.r.m. yazid, s. abdullah, a.k. ariffin, d. a. wahab, r. atiq, m.s. solah, a. hamzah.  (2018).  the needs to establish an integrated safety system for express bus.  - international journal of engineering & technology.  1537-1540. 

siti sarah kamaludin, prakash thamburaja, ahmad kamal ariffin.  (2018).  atomistic simulations of twist grain boundary structures in aluminum-magnesium alloys.  - international journal of engineering & technology.  . 

siti sarahjanuri, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, and shahrum abdullah.  (2018).  initial probability distribution in markov chain model for fatigue crack growth problem.  - international journal of engineering & technology.  . 

mohd syuhaimi bin ab rahman;mohd. marzuki bin mustafa;ahmad kamal ariffin bin mohd ihsan;ramizi bin mohamed;eddie shahril bin ismail;norngainy binti mohd tawil;norhana binti arsad;nazrul anuar bin nayan.  (2018).  pembangunan sistem komunikasi lebar jalur dikuasakan oleh penjana tenaga hijau dan peranti mesra alam untuk aplikasi dunia kecil pegun.  - .  . 

dinesh ragurajan, mohsen golieskardi, meenaloshini satgunam, md enamul hoque, angela min hwei ng, mariyam jameelah ghazali, ahmad kamal ariffin.  (2018).  advanced 3y-tzp bioceramic doped with al2o3 and mno2 particles potentially for biomedical applications: study on mechanical and degradation properties.  - journal of materials research and technology.  . 

m. mahmud, s. s. k. singh, s. abdullah, a. k. ariffin, z. m. nopiah.  (2018).  determining damaging fatigue cycles under influence of random loadings using the root-mean-square level.  - journal of mechanical engineering.  . 

mohd syuhaimi ab rahman, ahmad kamal arifin mohd ikhsan & abdul wahab mohamad.  (2018).  pemantapan pengurusan akademik.  - .  269. 

a.y.n. yusmye, a.k. ariffin, s. abdullah & s.s.k. singh, m. beer.  (2018).  application of fuzzy finite element method in addressing the presence of uncertainties.  - proceedings of the 28th international european safety and reliability conference (esrel 2018).  . 

d.a. wahab, e. blanco-davis, a.k. ariffin, j. wang.  (2018).  a review on the applicability of remanufacturing in extending the life cycle of marine or offshore components and structures.  - ocean engineering.  . 

ammer ezhar mohd razalli, dzuraidah abd. wahab, ahmad kamal ariffin mohd ihsan.  (2018).  durability studies of remanufacturable components for extended life cycle.  - journal of mechanical engineering.  . 

l. abdullah, s.s.k. singh, s. abdullah, a. h. azman, a.k. arifin, y. s. kong.  (2018).  fatigue life prediction of heavy vehicle leaf spring using statistical approach.  - proceedings of 134th iserd international conference, brussels, belgium.  . 

c. h. chin, s. abdullah, s. s. k. singh, a. k. ariffin.  (2018).  establishing energy-damage relationship for fatigue data editing of strain loading history.  - international review of mechanical engineering (i.re.m.e.).  . 

siti sarah januri, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, shahrum abdullah.  (2018).  the analysis of initial probability distribution in markov chain model for lifetime estimation.  - international journal of integrated engineering.  . 

m. mahmud, s. abdullah, a. k. ariffin & m. z. nopiah.  (2018).  on the need to adopt strain-based probabilistic approach in predicting fatigue life.  - journal of the brazilian society of mechanical sciences and engineering.  1-13. 

m. mahmud, s. abdullah, s. s. k. singh, a. k. ariffin, z. m. nopiah and a. arifin.  (2018).  distribution characterisation of coil spring strain histories using mixed weibull analysis.  - international journal of engineering & technology.  . 

noor shieela kalib, andanastuti muchtar, mahendra r somalu, ahmad kamal ariffin mohd ihsan, nurul ashikin mohd nazrul aman & joelle cw mah.  (2018).  influence of heat transfer on thermal stress development in solid oxide fuel cells: a review.  - international conference on mechanical and manufacturing engineering 2018 (icme 2018).  . 

s. fonna, gunawarman, s. huzni, a.k. ariffin.  (2018).  boundary element inverse analysis for rebar corrosion detection: study on the 2004 tsunami-affected structure in aceh.  - case studies in construction materials.  292-298. 

chin chuin hao, shahrum abdullah, ahmad kamal ariffin and salvinder singh karam singh.  (2018).  durability analysis for coil spring suspension based on strain signal characterization.  - international journal of engineering & technology.  . 

azli bin arifin;nordin bin jamaludin;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;mohd. zaki bin nuawi.  (2018).  quantitative study of self-magnetic flux leakage towards the failure analysis for ferromagnetic components.  - .  . 

m. n. husain, r. daud, k. s. basaruddin, f. mat, m. y. bajuri, a. k. arifin.  (2017).  influence of local meshing size on stress intensity factor of orthopaedic lag screw.  - aip conference proceedings.  1-7. 

m. r. m. akramin, a. k. ariffin, masanori kikuchi & s. abdullah.  (2017).  sampling method in probabilistic s-version finite element analysis for initial flaw size.  - journal of the brazilian society of mechanical sciences and engineering.  357-365. 

mashitah mahmud, salvinder singh karam singh, shahrum abdullah, ahmad kamal ariffin mohd ihsan, zulkifli mohd nopiah.  (2017).  determining damaging fatigue cycles under influence of random loadings using the root-mean-square level.  - 5th international conference on advances in mechanical engineering.  . 

n n mansor, r.daud, k s basaruddin, f mat, y bajuri and a k ariffin.  (2017).  elastic interactions between single microcrack and single osteon microstructure of human femur cortical bone.  - aip conference proceedings.  1-7. 

chin chuin hao, shahrum abdullah, ahmad kamal ariffin & salvinder singh karam singh.  (2017).  durability analysis for coil spring suspension based on strain signal characterisation.  - international conference on recent advances in automotive engineering & mobility research recar 2017.  . 

siti sarah januri, zulkifli mohd nopiah, mohd akramin mohd romlay, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, shahrum abdullah.  (2017).  statistical distribution for initial crack and number of loading in fatigue crack growth process.  - international journal of advanced and applied sciences.  . 

m. z. umara, v. p. vavilov, h. abdullah, and a. k. ariffin.  (2017).  detecting low-energy impact damages in carbon-carbon composites by ultrasonic infrared thermography.  - russian journal of nondestructive testing.  530-538. 

shahrum abdullah, salvinder singh karam singh, ahmad kamal ariffin, najihah abdul rahman & mazian mohammad.  (2017).  proceedings of symposium on damage mechanisms in materials and structures 2017 (sdmms 2017).  - proceedings of symposium on damage mechanisms in materials and structures 2017.  1-60. 

ammar adil al-bakri, zainuddin sajuri, ahmad kamal ariffin, mohammed abdul razzaq and mohd salehudin fafmin.  (2017).  fatigue properties of strained thin 304 stainless steel sheets.  - international journal of automotive and mechanical engineering.  4171-4182. 

fonna s., ibrahim i.m., ridha m., huzni s., ariffin a.k..  (2016).  simulation of the ill-posed problem of reinforced concrete corrosion detection using boundary element method.  - international journal of corrosion.  1-5. 

othman a., abdullah s., ariffin a.k., mohamed n.a.n..  (2016).  investigating the crushing behavior of quasi-static oblique loading on polymeric foam filled pultruded composite square tubes.  - composites part b: engineering.  493-514. 

rashid s., islami n., ariffin a.k., ridha m., fauna s..  (2016).  the effect of immersion time on the corrosion behavior of sus304 in brine using half-cell potential measurement.  - jurnal teknologi.  91-99. 

d. ragurajan, m. satgunam, m. golieskardi, a.k. ariffin and m.j. ghazali.  (2016).  effect of air sintering on microstructural and mechanical properties of aluminum oxide / manganese oxide doped y- tzp.  - journal of the australian ceramic society.  128-133. 

mastura markom, ahmad kamal ariffin mohd ikhsan & roszilah hamid.  (2016).  penambahbaikan kualiti berterusan dalam pendidikan kejuruteraan.  - .  160. 

s.a.n. mohamed, s. abdullah, a. arifin, a.k. ariffin, and m.m. padzi.  (2016).  characterization of the biaxial fatigue behaviour on medium carbon steel using the strain-life approach.  - international journal of automotive and mechanical engineering.  3262-3277. 

s.a.n. mohamed, a. arifin, s. abdullah and a.k. ariffin.  (2016).  charactering self magnetic flux leakage associated to biaxial fatigue life estimation using weibull-based method.  - international journal of fracture fatigue and wear.  21-26. 

al-bakri a.a., sajuri z., ariffin a.k., razzaq m.a., fafmin m.s..  (2016).  tensile and fracture behaviour of very thin 304 stainless steel sheet.  - jurnal teknologi.  45-50. 

zulkifli mohd nopiah, siti sarah januri, ahmad kamal ariffin, nurulkamal masseran, shahrum abdullah.  (2016).  transition probabilities matrix of markov chain in the fatigue crack growth model.  - the 4th international conference on quantitative sciences and its applications (icoqsia 2016).  1-6. 

djamaluddin f., abdullah s., ariffin a.k., nopiah z.m..  (2016).  finite element analysis and crashworthiness optimization of foam-filled double circular under oblique loading.  - latin american journal of solids and structures.  2176-2189. 

chandra d., putra i.s., ariffin a.k., mardi n.a., nukman y., purbolaksono j..  (2016).  fatigue growth analysis of a surface crack in a solid cylinder under combined cyclic axial-torsion loading.  - experimental techniques.  1397-1407. 

senin a., nopiah z.m., ihsan a.k.a.m., abdullah s., wahab d.a., jamaludin m.j., zakaria a..  (2016).  johnson cook constitutive modeling for austenite metal in hot forming process.  - jurnal teknologi.  71-75. 

ab-rahman m.s., nor m.j.m., ihsan a.k.a.m., zaharim a., hipni a..  (2015).  young lecturers' catalyst technique towards excellent research culture in malaysia scenario.  - asian social science.  1-13. 

djamaluddin f., abdullah s., ariffin a.k., nopiah z.m..  (2015).  optimization of foam-filled double circular tubes under axial and oblique impact loading conditions.  - thin-walled structures.  1-11. 

nopiah z.m., junoh a.k., ariffin a.k..  (2015).  vehicle interior noise and vibration level assessment through the data clustering and hybrid classification model.  - applied acoustics.  9-22. 

djamaluddin f., abdullah s., ariffin a.k., nopiah z.m..  (2015).  non-linear finite element analysis of bitubal circular tubes for progressive and bending collapses.  - international journal of mechanical sciences.  228-236. 

m.r. jamli, a.k. ariffin, d.a. wahab.  (2015).  incorporating feedforward neural network within finite element analysis for l-bending springback prediction.  - expert systems with applications.  2604-2614. 

eshkoor r.a., ude a.u., sulong a.b., zulkifli r., ariffin a.k., azhari c.h..  (2015).  energy absorption and load carrying capability of woven natural silk epoxy - triggered composite tubes.  - composites part b: engineering.  10-18. 

zulkifli mohd nopiah, ahmad kadri junoh and ahmad kamal ariffin.  (2015).  a novel hybrid fuzzy nonlinear weighted goal programming for optimising interior acoustics level in car cabin.  - journal of vibration and control.  1721-1744. 

mohammad syuhaimi ab-rahman, mohd jailani mohd nor, ahmad kamal ariffin mohd ihsan, azamin zaharim & afiq hipni.  (2015).  young lecturers` catalyst technique towards excellent research culture in malaysia scenario.  - asian social science.  1-13. 

m. imran, s.f. eric lim, i.s. putra, a.k. ariffin, c.j. tan, j. purbolaksono.  (2015).  assessment of a planar inclusion in a solid cylinder.  - engineering failure analysis.  236-246. 

mohammad syuhaimi ab-rahman, shahrom md zain, mohd jailani mohd nor, ahmad kamal ariffin mohd ihsan, azamin zaharim, muhamad fadhil sukarna & afiq hipni.  (2015).  achieving quality in research through stimulated publication technique.  - asian social science.  14-25. 

a. arifin, w.z.w. jusoh, s. abdullah, n. jamaluddin and a.k. ariffin.  (2015).  investigating the fatigue failure characteristics of a283 grade c steel using magnetic flux detection..  - steel and composite structures.  601-614. 

f. djamaluddin, s. abdullah, a.k. arrifin and z.m. nopiah.  (2015).  modeling and optimization of aluminum foam cylindrical double tubes under axial impact.  - journal of mechanical engineering and sciences.  1383-1392. 

al emran ismail, ahmad kamal ariffin, s. abdullah, m.j ghazali and a.l mohd tobi.  (2015).  j-integral prediction for semi-elliptical surface cracks in round bars subjected to torsion moment.  - applied mechanics and materials.  295-299. 

othman a., abdullah s., ariffin a.k., mohamed n.a.n..  (2014).  investigating the quasi-static axial crushing behavior of polymeric foam-filled composite pultrusion square tubes.  - materials and design.  446 - 459. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2014).  ungkapan kamiran-j retak permukaan pada bar silinder padu kenaan beban ragam i.  - jurnal teknologi (sciences and engineering).  7 - 17. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2014).  j-integral evaluation of surface cracks in round bar under mode iii loadings.  - research journal of applied sciences, engineering and technology.  1985 - 1993. 

nopiah z.m., junoh a.k., ariffin a.k..  (2014).  computational method for predicting the effects of vibrations to acoustical comfort in vehicle cabin.  - international journal of vehicle noise and vibration.  150 - 170. 

m.r. jamli, a.k. ariffin, d.a. wahab.  (2014).  integration of feedforward neural network and finite element in the draw-bend springback prediction.  - expert systems with applications.  3662-3670. 

a.u. ude, r.a. eshkoor, r. zulkifili, a.k. ariffin, a.w. dzuraidah, c.h. azhari.  (2014).  bombyx mori silk fibre and its composite: a review of contemporary developments.  - materials and design.  57(2014):298-305. 

zuria mahmud, salleh amat, mohd izham hamzah,a. rahman jamal, w. zurinah w. ngah, zainab ismail, ahmad kamal ariffin mohd ihsan, salina a.samad.  (2014).  modul mentoran ahli akademik.  - .  . 

r.a. eshkoor, a.u. ude, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2014).  failure mechanism of woven natural silk/epoxy rectangular composite tubes under axial quasi-static crushing test using trigger mechanism.  - international journal of impact engineering.  53-61. 

a. shamsudeen, s. abdullah, a.k. ariffin, m.r.m. rasani and y. ali.  (2014).  design and simulation of a cylinder head structure for a compressed natural gas direct injection engine.  - international journal of automotive and mechanical engineering.  9:1620-1629. 

m. b. ali, s. abdullah, m. z. nuawi, a. k. ariffin, z. m. nopiah.  (2014).  evaluating instrumented charpy impact strain signals using curve fitting equations.  - journal of central south university.  21(2):600-609. 

n. i. i. mansor, s. abdullah, a. k. ariffin & j, syarif.  (2014).  a review of the fatigue failure mechanism of metallic materials under a corroded environment.  - engineering failure analysis.  42 (2014) 353-365. 

a. m. t. ariffin, s. abdullah, md. rafiquzzaman, r. zulkifli, d. a. wahab & a. k. ariffin.  (2014).  investigation of the behaviour of a chopped strand mat/woven roving/foam-klegecell composite lamination structure during charpy testing.  - materials and design.  59:475-485. 

ahmad kadri junoh, zulkifli mohd nopiah and ahmad kamal ariffin.  (2014).  application of feed-forward neural networks for classifying acoustics levels in vehicle cabin.  - applied mechanics and materials.  . 

ude, a.u., ariffin, a.k., azhari, c.h..  (2013).  an experimental investigation on the response of woven natural silk fiber/epoxy sandwich composite panels under low velocity impact.  - fibers and polymers.  14(1):127-132. 

oshkovr, sa; taher, st; oshkour, aa; ariffin, ak; azhari, ch.  (2013).  finite element modelling of axially crushed silk/epoxy composite square tubes.  - composite structures.  95:411-418. 

m. j. ghazali, a. jemat, z. sajuri, a. k. a. mohd ihsan, j. a. ghani, w. m. f. w. mahmood, t. i. mohamad.  (2013).  taught masters of engineering programme student perceptions on research methodology course in research project.  - international conference on engineering education (icee) 2013.  . 

zulkifli mohd nopiah, ahmad kadri junoh, ahmad kamal ariffin.  (2013).  formulation of weighted goal programming using the data analysis approach for optimising vehicle acoustics levels.  - international journal of acoustics and vibration.  18(3):124-133. 

zulkifli mohd nopiah, ahmad kadri junoh, ahmad kamal ariffin.  (2013).  optimisation of acoustical comfort in vehicle cabin using goal programming.  - international journal of vehicle noise and vibration.  9(3):194-215. 

hasan asmz, hamid r and ariffin ak.  (2013).  specimen size, slenderness ratio and loading rate effect on the dynamic simulation of hpc.  - journal of civil and environmental engineering.  1-6. 

nuraini, aa; ihsan, akam; nor, mjm; jamaluddin, n.  (2013).  vibro-acoustic analysis of free piston engine structure using finite element and boundary element methods.  - journal of mechanical science and technology.  26(8):2405-2411. 

r. daud, a.k. ariffin and s. abdullah.  (2013).  validation of crack interaction limit model for parallel edge cracks using two-dimensional finite element analysis.  - international journal of automotive and mechanical engineering.  993-1004. 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, ahmad kamal ariffin mohd ihsan, jaharah ab ghani, mohd anas mohd sabri, zainuddin zajuri, shahrum abdullah, abu bakar sulong.  (2013).  direct measurement and evaluation for mechanical engineering programme outcomes: impact on continuous improvement.  - international education studies.  161-167. 

zulkifli mohd nopiah, ahmad kadri junoh and ahmad kamal ariffin.  (2013).  noise annoyance fuzzy index in passenger car cabin.  - international journal vehicle noise and vibration.  216-233. 

r.a. eshkoor, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2013).  effect of trigger configuration on the crashworthiness characteristics of natural silk epoxy composite tubes.  - composites part b: engineering.  55:5-10. 

a.p. rahmadi, w.h. wan badaruzzaman and a.k. ariffin.  (2013).  prediction of deflection of the composite profiled steel sheet mdf-board (pssmdfb) floor system.  - procedia engineering.  . 

m. ihsan, s. fonna, m. ridha, s. huzni and a. k. ariffin.  (2013).  the influence of anode profiles for three dimensions numerical simulation of reinforced concrete corrosion using boundary element method.  - advanced materials research.  . 

s. fonna, s. huzni, m. ridha, a.k. ariffin.  (2013).  inverse analysis using particle swarm optimization for detecting corrosion profile of rebar in concrete structure.  - engineering analysis with boundary elements.  37:585-593. 

r.a. eshkoor, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2013).  comparative research on the crashworthiness characteristics of woven natural silk/epoxy composite tubes.  - materials and design.  47:248-257. 

a.u. ude, a.k. ariffin, c.h. azhari.  (2013).  impact damage characteristics in reinforced woven natural silk/epoxy composite face-sheet and sandwich foam, coremat and honeycomb materials.  - international journal of impact engineering.  58:31-38. 

mohammad syuhaimi ab-rahman, kasmiran jumari, shahrom md zain, mohd jailani mohd nor, ahmad kamal ariffin mohd ihsan and azami zaharim.  (2012).  easy research: strategy towards excellency and unstressful research.  - journal of engineering and applied sciences.  7(1):53-59. 

mohammad syuhaimi ab-rahman, nor shaadah roslani, kasmiran jumari, shahrom md zain, afiq hipni, mohd jailani mohd nor, ahmad kamal ariffin mohd ihsan and azami zaharim.  (2012).  requirements for a postgraduate engineering student before and during starting research.  - journal of engineering and applied sciences.  7(1):17-22. 

n.a. khadim, s. abdullah & a.k. ariffin.  (2012).  effective strain damage model associated with finite element modelling and experimental validation.  - international journal of fatigue.  36(1):194-205. 

bahari, a.r., nuawi, m.z., abdullah, s., ihsan, a.k.a.m., ali, m.b..  (2012).  characterisation of the sound and vibration signal of impact testing on automotive component materials.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials).  . 

fonna s., ridha m., huzni s., israr, ariffin a.k..  (2012).  boundary element inverse analysis by using particle swarm optimization for reinforced concrete corrosion identification.  - 2011 international conference on materials and products manufacturing technology, icmpmt 2011; chengdu.  . 

a. e. ismail, a. k. ariffin, s. abdullah & m. j. chazali.  (2012).  stress intensity factors under combined tension and torsion loadings.  - indian journal of engineering & materials sciences.  19:5-16. 

m.z nuawi, a.r. bahari, s. abdullah, a.k.a.m. ihsan, m.b. ali.  (2012).  mesokurtosis zonal nonparametric signal analysis for dynamic characterisation of metallic material.  - jurnal kejuruteraan.  24:21-27. 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali.  (2012).  stress intensity factors for surface cracks in round bar under single and combined loadings.  - meccanica.  47:1141-1156. 

mohammad syuhaimi ab-rahman, norsyuhadah norzalwi, kasmiran jumari, shahrom md zain, ahmad kamal ariffin mohd ihsan, azami zaharim and mohd jailani mohd nor.  (2012).  publication factor : strategies and planning.  - journal of engineering and applied sciences.  7(2):198-201. 

mohammad syuhaimi ab-rahman, norsyuhadah norzalwi, kasmiran jumari, shahrom md zain, ahmad kamal ariffin mohd ihsan, azami zaharim, mohd jailani mohd nor.  (2012).  research unit: definition and resurrection strategy.  - journal of engineering and applied sciences.  7(2):202-206. 

s.a. oshkovr, r.a. eshkoor, s.t. taher, a.k. ariffin, c.h. azhari.  (2012).  crashworthiness characteristics investigation of silk/epoxy composite square tubes.  - composite structures.  94(8):2337-2342. 

ja`afar sahari, syazrin aklili, dzuraidah abd wahab, ruhizan mohd yasin, shahrum abdullah, ahmad kamal ariffin mohd ihsan, shahrir abdullah, mohd zaidi omar, norhamidi muhamad.  (2012).  mercu kesarjanaan pengajaran dan pembelajaran, penyelidikan tindakan di institusi pengajian tinggi.  - .  175-189. 

n. a. akeel, z. sajuri and a. k. ariffin.  (2012).  prediction of fatigue crack propagation of rail material using 2d finite element modeling.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials).  . 

roszilah hamid, r. jamalluddin, a. s. m. z. hasan, mudiono kasmuri, and ahmad kamal ariffin.  (2012).  size effect for hpc with silica fume under drop-weight impact.  - 3rd international technical conference (itc2012) : green technology and entrepreneurship towards sustainable development.  . 

baba md deros, azah mohamed, norhamidi mohamed, ahmad kamal ariffin mohd ihsan.  (2012).  a study of alumni feedback on outcome based education in the faculty of engineering & built environment, universiti kebangsaan malaysia.  - procedia social and behavioral sciences - ukm teaching and learning congress 2011.  . 

mohd anas mohd sabri, nor kamaliana khamis, mohd faizal mat tahir, zaliha wahid, ahmad kamal ariffin mohd ihsan, abu bakar sulong, shahrum abdullah..  (2012).  pembangunan kurikulum berdasarkan kaedah penilaian gambar besar untuk program kejuruteraan mekanikal.  - kongres pengajaran & pembelajaran ukm 2012 - seminar pendidikan kejuruteraan & alam bina (peka 2012).  . 

mohd anas mohd sabri, nor kamaliana khamis, mohd faizal mat tahir, zaliha wahid, ahmad kamal ariffin mohd ihsanb, abu bakar sulong & shahrum abdullah.  (2012).  pembangunan kurikulum berdasarkan kaedah penilaian gambaran besar untuk program kejuruteraan pembuatan.  - kongres pengajaran & pembelajaran ukm 2012 - seminar pendidikan kejuruteraan & alam bina (peka 2012).  . 

nor kamaliana khamis, zambri harun, mohd faizal mat tahir, zaliha wahid, mohd anas mohd sabri, ahmad kamal ariffin mohd ihsan, shahrum abdullah, abu bakar sulong dan nizaroyani saibani.  (2012).  faktor motivasi dan kekangan memohon jurutera professional di kalangan ahli akademik : satu kajian empirikal.  - kongres pengajaran & pembelajaran ukm 2012.  . 

mohd faizal mat tahir, zaliha wahid, zainuddin sajuri, shahrum abdullah, jaharah ab. ghani, ahmad kamal ariffin mohd ihsan, abu bakar sulong, mohd anas mohd sabri, norkamaliana khamis.  (2012).  pengukuran dan penilaian secara langsung bagi hasil pembelajaran kursus di jabatan kejuruteraan mekanik dan bahan : kesan terhadap penambahbaikan berterusan..  - kongres pengajaran dan pembelajaran ukm 2012 - seminar pendidikan kejuruteraan dan alam bina 2012.  . 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, zainuddin sajuri, shahrum abdullah, ahmad kamal ariffin mohd ihsan, abu bakar sulong, jaharah ab ghani, mohd anas mohd sabri.  (2012).  pengukuran dan penilaian secara langsung bagi hasil program kejuruteraan mekanik : kesan terhadap penambahbaiakan berterusan.  - kongres pengajaran dan pembelajaran ukm 2012 -seminar pendidikan kejuruteraan dan alam bina 2012.  . 

nor kamaliana khamis, ahmad kamal ariffin mohd ihsan, shahrum abdullah, nur farah liza ramli, dan zainuddin sajuri.  (2012).  soal selidik pencapaian objektif program dan hasil pembelajaran program alumni jabatan kejuruteraan mekanik dan bahan melalui kaedah atas talian.  - kongres pengajaran & pembelajaran ukm 2012.  . 

s. ataollahi, s.t. taher, r.a. eshkoor, a.k. ariffin, c.h. azhari.  (2012).  energy absorption and failure response of silk/epoxy composite square tubes: experimental.  - composites: part b.  43(2):542-548. 

ruslizam daud, ahmad kamal ariffin, shahrum abdullah and al emran ismail.  (2012).  applied fracture mechanics.  - .  13(359-380). 

eshkour, ra; ariffin, ak; zulkifli, r; sulong, ab; azhari, ch.  (2012).  the failure mode of natural silk epoxy triggered composite tubes.  - 1st international conference on mechanical engineering research 2011 (icmer);kuantan ( iop conference series-materials science and engineering).  . 

ali, m.b., abdullah, s., nuawi, m.z., ariffin, a.k..  (2012).  investigation of energy absorbed from an instrumented charpy impact on automotive specimens.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials).  . 

kadhim, n.a., abdullah, s., ariffin, a.k., nikabdullah, n..  (2012).  experimental and analytical durability assessment of sae 1045 steel under service loadings.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials).  . 

zulkifli mohd nopiah, ahmad kadri junoh, wan zuki azman wan muhamad, mohd jailani mohd nor, ahmad kamal ariffin mohd. ihsan, mohammad hosseini fouladi.  (2012).  linear programming: optimization of noise and vibration model in passenger car cabin.  - international journal of soft computing and software engineering (jscse).  2(1):1-13. 

ahmad kadri junoh, zulkifli mohd nopiah, abdull halim abdul, mohd. jaliani mohd nor, ahmad kamal ariffin mohd ihsan, mohammad hosseini fouladi.  (2012).  a study to predict the effects of tyres vibration to sound quality in passenger car cabin.  - international journal of engineering.  6(1):53-69. 

beden, s.m., abdullah, s., ariffin, a.k..  (2012).  fatigue crack growth rate of api x70 steel pipelines under spectrum loading.  - international journal of pressure vessels and piping.  96-97:7-12. 

mohammad hosseini fouladi, mohd. jailani mohd. nor, othman inyatullah, ahmad kamal.  (2011).  evaluation of seat vibration sources in driving condition using spectral analysis.  - journal of engineering science and technology.  6(3):342-358. 

ihsan a.k.a.m..  (2011).  key engineering materials: preface.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials).  . 

fonna, s., ridha, m., huzni, s., israr, ariffin, a.k..  (2011).  pre and post processing for boundary element method (bem) 3d reinforced concrete corrosion simulation.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur.  . 

mohammad syuhaimi ab-rahman, kasmiran jumari, shahrom md zain et al....  (2011).  introduction to research, sub-breaking and ethics: the first knowledge before starting the research empire.  - the social sciences.  6(5):386-390. 

mohammad syuhaimi ab-rahman, shahrom md zain, afiq hipni, mohd jailani mohd nor, ahmad kamal ariffin mohd ihsan, nur farah liza ramli, muhamad fadhil che sukarna, nor shaadah roslani, nurul huda abdul.  (2011).  high quality students by improving research supervision.  - the social sciences.  6(5):344-349. 

m.h. nahi, a. ismail & a.k. ariffin.  (2011).  analysis of asphalt pavement under nonuniform tire-pavement contact stress using finite element method.  - journal of applied sciences.  11(14): 2562-2569. 

beden s.m., abdullah s., ariffin a.k., al-asady n.a..  (2011).  simulation and experimental analysis of fatigue crack growth under cyclic loading.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials).  . 

a. e. ismail, a. k. ariffin, s. abdullah. m. j. ghazali and r. daud.  (2011).  j-integral analysis of surface cracks in round bars under bending moments.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket (applied mechanics and materials).  . 

m. abdulrazzaq, a. k. ariffin, s. abdullah, z. sajuri, a.e ismail and a. ariffin.  (2011).  fatigue crack growth prediction of thick wall cylinder under variable amplitude loading.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials).  . 

m. abdulrazzaq, a. k. ariffin, s. abdullah, z. sajuri.  (2011).  crack closure behavior under high-load ratio for aisi 4340 steel.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials).  . 

s. y. ang and a. k. ariffin.  (2011).  structural fatigue reliability assessment using modified monte carlo simulation.  - journal of the institution of engineers malaysia (iem).  72(1):2-10. 

zulkifli a., ariffin a.k., ismail a.e., daud r., akramin m.r.m..  (2011).  stress and probabilistic study of the lumbar vertebra under compression loading.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket (applied mechanics and materials).  . 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali, r. daud.  (2011).  j-integral analysis of surface cracks in round bars under bending moment.  - applied mechanics and materials.  52-54:43-48. 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali, r. daud, m. abdulrazzaq and a. zulkifli.  (2011).  j-integral analysis of surface cracks in round bars under tension loadings.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket (applied mechanics and materials).  . 

a. e. ismail, a. k. ariffin, s. abdullah and m. j. ghazali.  (2011).  off-set crack propagation analysis under mixed mode loadings.  - international journal of automotive technology.  12(2):225-232. 

a.e ismail, a.k ariffin, s. abdullah, m.j ghazali and r. daud.  (2011).  mode iii stress intensity factors of surface crack in round bars.  - 2011 international conference on key engineering materials, ickem 2011; sanya(advanced materials research).  . 

a.e ismail, a.k ariffin, s. abdullah, m.j ghazali and r. daud.  (2011).  j-integral analysis of surface cracks in round bars under combined loadings.  - 2011 international conference on key engineering materials, ickem 2011; sanya (advanced materials research).  . 

r a eshkour, a k ariffin, r zulkifli, a b sulong and c h azhari.  (2011).  the failure mode of natural silk epoxy triggered composite tubes.  - 1st international conference in mechanical engineering research (icmer) 2011.  . 

n.h. mohamad nor, n. muhamad, a.k. ariffin, m. ruzi, k.r. jamaludin and a. sufizar.  (2011).  injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for multiple performance using grey relational analysis.  - journal of applied sciences.  11(10):1833-1838. 

a.u. ude, a.k. ariffin, a.a. lashlem and c.h. azhari.  (2011).  drop weight impact response of woven natural silk/epoxy laminated composite plates.  - australian journal of basic and applied sciences.  5(6):289-295. 

sity daud, zainol mustafa, nur riza mohd suradi, ahmad kamal ariffin, noor rahamah abu bakar and rashila ramli.  (2011).  compliance to thesis examination procedure in the iso quality management system for teaching and learning.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka (procedia - social and behavioral sciences).  . 

huzni s., ridha m., ariffin a.k..  (2011).  stress distribution analysis on four types of stress corrosion cracking specimen.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials).  . 

m.m. rahman, a.k. ariffin, s.s.m. nor & h.y. rahman.  (2011).  powder material parameters establishment through warm forming route.  - materials and design.  32(1):264-271. 

ismail, a.e., ariffin, a.k., abdullah, s., ghazali, m.j..  (2011).  probabilistic assessments of the plate using monte carlo simulation.  - conference on advanced materials and nanotechnology, caman 2009 (iop conference series: materials science and engineering); kuala lumpur.  . 

ali, m.b., abdullah, s., nuawi, m.z., ariffin, a.k..  (2011).  test simulation using finite element method.  - conference on advanced materials and nanotechnology, caman 2009; kuala lumpur (iop conference series: materials science and engineering).  . 

akeel, n.a., sajuri, z., ariffin, a.k., abdulrazzaq, m..  (2011).  three dimensional simulations on stress distribution and fatigue damage life of wheel/rail contact region.  - 2011 international conference on advanced engineering materials and technology, aemt 2011; sanya (advanced materials research).  . 

daud r., ariffin a.k., abdullah s., ismail a.e..  (2011).  computation of mixed mode stress intensity factor for parallel edge cracks.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket(applied mechanics and materials).  . 

ridha m., fonna s., huzni s., fachrizal, ariffin a.k..  (2011).  application of bem for improving corrosion assessment of public building stricken by tsunami aceh 2004.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur; 7 june 2010 through 9 june 2010 (key engineering materials).  . 

safuadi, ridha m., huzni s., fonna s., ariffin a.k., daud a.r..  (2011).  optimization of cathodic protection system design for pipe-lines structure with ribbon sacrificial anode using bem and ga.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials).  . 

ali, mb; abdullah, s; nuawi, mz; ariffin, ak.  (2011).  analysis of an instrumented charpy impact using power spectrum density.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials).  . 

ariffin a.k., ramli n.f.l., abdul n.a., husain h., abd wahab d..  (2011).  faculty of engineering and built environment academicians` actual hours of workload.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka.  . 

ariffin a.k., mustafa m.m., md idrus r., abdul n.a., ramli n.f.l..  (2011).  implication of the budget allocation reduction on teaching and learning process.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka.  . 

daud r., ariffin a.k., abdullah s., ismail a.e., zulkifli a..  (2011).  computation of stress intensity factor for multiple cracks using singular finite element.  - 2011 international conference on key engineering materials, ickem 2011(advanced materials research).  . 

rahman m.m., tarlochan f., ramesh s., ariffin a.k., nor s.s.m..  (2011).  numerical simulation and experimentation of warm metal powder compaction process.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials).  . 

beden s.m., abdullah s., ariffin a.k., kadhim n.a..  (2011).  observing load sequence effects on simulated and experimental fatigue crack growth occurrence.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials).  . 

abdulrazzaq m., ariffin a.k., el-shafie a., abdullah s., sajuri z., akeel n.a..  (2011).  adaptive neural network modelling in fatigue life prediction under load history effects.  - 2011 international conference on advanced engineering materials and technology, aemt 2011; sanya; 29 july 2011 through 31 july 2011 (advanced materials research).  . 

shahrom md zain, mohd syuhaimi ab-rahman, ahmad kamal ariffin mohd ihsan, azami zahrim, mohd jailani mohd nor, mohd fauzi mohd zain, afiq hipni, nurfarah liza ramli & wan aizon wan ghopa.  (2011).  motivation for research and publication: experience as a researcher and an academic.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka.  . 

miloud souiyah, a. muchtar and a.k. ariffin.  (2011).  finite element analysis of indentation cracks for brittle materials under static loading.  - key engineering materials.  . 

n. a. kadhim, s. abdullah, a. k. ariffin and s. m. beden.  (2011).  fatigue failure behaviour study of automotive lower suspension arm.  - key engineering materials.  . 

miloud souiyah, a. muchtar and a. k. ariffin.  (2011).  on the crack propagation trajectory of central cracked plates under mixed mode loading conditions.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials).  . 

saibani. n, arsad. n, ariffin. a. k, wahab, d. a, azrilah. a. a.  (2011).  course outcomes measurement analysis using rasch model for an engineering course.  - 2011 3rd international congress on engineering education (iceed), kuala lumpur, ieee catalog number: cfp1168h-cdr.  . 

baba md deros, azah mohamed, norhamidi mohamed & ahmad kamal ariffin mohd ihsan.  (2011).  a study of alumni fedback on outcome based education: master of engineering in manufacturing systems.  - kongres pengajaran & pembelajaran ukm2011, hotel vistana, pulau pinang             .  . 

s. abdullah, m. b. ali, m. z. nuawi, z. m. nopiah and a. k. ariffin.  (2011).  evaluating charpy impact signals with different frequencies using power spectrum densities.  - 2010 international conference on advances in materials and manufacturing processes, icammp 2010; shenzhen(advanced materials research).  . 

mohammad syuhaimi ab-rahman, shahrom md zain, ahmad kamal ariffin mohd ihsan, azami zahrim, mohd jailani mohd nor, mohd fauzi mohd zain, nor shaadah roslani, afiq hipni, nurfarah liza, mohd fadhil.  (2011).  effective supervision strategies in improving the quality and quantity of research.  - international business management.  5(6):312-318. 

amiruddin ismail, mohammed hadi nahi, a. k. ariffin, ramez al-ezzi al-mansob.  (2011).  finite element analysis of asphalt pavement rutting using viscoplastic model.  - international transport research conf. (irtc 2011) & 6th. malaysian universities transport research forum conf. 2011 (6th. mutrfc), usm p. pinang..  . 

m. abdulrazzaq, a. k. ariffin, ahmed el-shafie, s. abdullah, z. sajuri & n.a. akeel.  (2011).  adaptive neural network modelling in fatigue life prediction under load history effects.  - advanced materials research.  . 

abdul razzaq m., ariffin a.k., al-shafie a., abdullah s., sajuri z., kadhim n.a..  (2011).  fatigue life modelling under constant amplitude loading using adaptive neuro - fuzzy (anfis) application.  - australian journal of basic and applied sciences.  5(8):1194-1204. 

ridha, m., safuadi, huzni, s., israr, ariffin, a.k., daud, a.r..  (2011).  the evaluation of cathodic protection system design by using boundary element method.  - 2011 international conference on materials and products manufacturing technology, icmpmt 2011; chengd (advanced materials research).  . 

akeel, n.a., sajuri, z., ariffin, a.k..  (2011).  analysis of rolling contact fatigue damage initiation at the wheel-rail interface.  - australian journal of basic and applied sciences.  5(12):937-945. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2011).  probabilistic high cycle multiaxial fatigue analysis using finite element method.  - transactions hong kong institution of engineers.  18(2):13-18. 

ali, m.b., abdullah, s., nuawi, m.z., ariffin, a.k., mohammad, m..  (2011).  evaluating charpy impact signals using power spectrum densities: a finite element method approach.  - international journal of mechanical and materials engineering.  6(1):92-101. 

abdullah, s; beden, sm; ariffin, ak; nopiah, zm.  (2011).  effects of load sequence on fatigue crack growth in pressure vessels.  - 2011 international conference on materials science and engineering applications, icmsea 2011; xi`an(advanced materials research).  . 

ahmad kadri j., wan zuki azman w.m., zulkifli m.n., nor m.j.m., kamal ariffin a., hosseini fouladi m..  (2011).  a study on the effects of tyre to vehicle acoustical comfort in passenger car cabin.  - 2011 3rd international conference on computer research and development, iccrd 2011; shanghai; 11 march 2011 through 15 march 2011.  . 

kadhim n.a., abdullah s., ariffin a.k..  (2011).  effect of the fatigue data editing technique associated with finite element analysis on the component fatigue design period.  - materials and design.  32(2):1020-1030. 

sabri m., ariffin a.k., nor m.j.m..  (2011).  free vibration of tire road contact.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials).  . 

daud r., ariffin a.k., abdullah s., ismail a.e..  (2011).  j-integral evaluation in two dimensional interacting cracks.  - 2011 international conference on key engineering materials, ickem 2011; sanya (advanced materials research).  . 

ahmad kamal ariffin, nur farah liza ramli, nasrul amir abdul,
hafizah husain dan dzuraidah abd wahab.  (2010).  beban jam notional pensyarah fakulti kejuruteraan & alam bina.  - prosiding seminar pendidikan kejuruteraan dan alam bina 2010 (peka2010) sempena kongres pengajaran dan pembelajaran ukm 2010.  . 

a.e.ismal, a.k.ariffin, s.abdullah dan m.j.ghazali.  (2010).  stress intensity factors for surface cracks in round bars under combined bending and torsion loadings.  - international review of mechanical engineering (ireme).  4(7):827-832. 

r. daud, a.k. ariffin, s.abdullah.  (2010).  an investigation of stress intensity factor for two equal parallel cracks using analytical and numerical formulation.  - regional engineering postgraduate conference (epc) 2010, fakulti kejuruteraan dan alam bina, universiti kebangsaan malaysia.  . 

s.m. beden, s. abdullah, a.k. ariffin, n.a. al-asady.  (2010).  fatigue crack growth simulation of aluminium alloy under spectrum loadings.  - materials and design.  31(7):3449-3456. 

s.m. tahir, a.k. ariffin, m.s. anuar.  (2010).  finite element modelling of crack propagation in metal powder compaction using mohr-coulomb and elliptical cap yield criteria.  - powder technology.  202:162-170. 

s. abdullah, e. adril, a. muchtar and a.k. ariffin.  (2010).  friction reduction in compressed natural gas direct injection engine using piston rings with diffusion chromium coating.  - journal of applied sciences.  10(6):462-470. 

a. s. m. z. hasan, r. hamid, a. k. ariffin and r. gani.  (2010).  stress-strain behavior of normal strength concrete subjected to high strain rate.  - asian journal of applied sciences.  145-152. 

romlay, f.r.m., ouyang, h., ariffin, a.k., mohamed, n.a.n..  (2010).  modeling of fatigue crack propagation using dual boundary element method and gaussian monte carlo method.  - engineering analysis with boundary elements.  34(3):297-305. 

ahmad kamal ariffin, mohd. marzuki mustafa, rosafizah md idrus, nasrul amir abdul, nur farah liza ramli.  (2010).  implikasi pengurangan peruntukkan fakulti terhadap proses pengajaran dan pembelajaran.  - kongres pengajaran dan pembelajaran ukm 2010.  . 

mohammed hadi, amiruddin ismail and ahmad kamal ariffin bin mohd ihsan.  (2010).  calculating the primary response of flexible pavement`s layers using finite element theory.  - world engineering congress 2010 (wec2010)- conference on buildings and infrastructure technology, kuching, sarawak.  . 

shahrom md zain, mohd shuhaimi abd rahman, ahmad kamal ariffin mohd ihsan, azami zahrim , mohd jailani mohd nor, mohd fauzi mohd zain, mohd afiq hipni, nurfarah liza ramli dan wan aizon wan ghopa.  (2010).  motivasi penyelidikan dan penerbitan: pengalaman sebagai penyelidik & pengajar.  - prosiding seminar pendidikan kejuruteraan dan alam bina 2010 (peka2010) sempena kongres pengajaran dan pembelajaran ukm 2010.  . 

mohammed hadi nahi, amiruddin ismail and a. k. ariffin.  (2010).  prediction of asphalt pavement rutting using finite element theory.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia.  . 

m. b. ali, s. abdullah, m.z. nuawi, a.k. ariffin and k.a. zakaria.  (2010).  statistical analysis to evaluate charpy impact signals: a finite element method approach.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia.  . 

r. hamid, a. s. m. z. hasan, and a. k. ariffin.  (2010).  sensivity of model parameter on dynamic behavior simulation of hpc.  - journal of materials in civil engineering.  22(12):1244-1251. 

a.u. ude, a.k. ariffin, k. sopian, a. arifin and c.h. azhari.  (2010).  the impact damage response of plain woven natural silk/epoxy laminated composite plates.  - international journal of engineering, science and technology.  2(5):128-140. 

r. hamid, a. s. m. z. hasan, and a. k. ariffin.  (2010).  sensitivity of model parameter on dynamic behavior simulation of hpc.  - journal of materials in civil engineering.  22(12):1244-1251. 

n. a. akeel, m. a. aziman, z. sajuri, a. k. ariffind and a. w. ikhsan.  (2010).  identification of damages and stress analysis of rail/wheel rolling contact region.  - key engineering materials - 8th international conference on fracture and strength of solids 2010.  . 

a. e. ismail, a. k. ariffin, s. abdullah, m. j. ghazali dan z. ahmad.  (2010).  analisis kamiran-j pada bar yang mengandungi retak permukaan kenaan momen lentur.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia.  . 

albert uchenna ude, ahmad kamal ariffin, kamaruzzaman sopian and che husna azhari.  (2010).  energy attenuation capability of woven natural silk/epoxy composite plates subjected to drop-weight impacts.  - arpn journal of engineering and applied sciences.  5(8):75-87. 

a.e ismail, a.k ariffin, s. abdullah, m.j ghazali.  (2009).  numerical modeling of surface cracks under combined loadings.  - seminar on engineering mathematics 2009 (emas`09).  . 

m. abdulrazzaq, a. k. ariffin, s. abdullah and z. sajuri.  (2009).  fatigue crack growth life of thick-walled cylinder with circumferential cracks under different loading.  - proceeding of enginneering mathematics seminar 2009, penerbit ukm.  . 

s. abdullah, m. f. abdullah, a. k. ariffin, a. jalar.  (2009).  effect of leadframe oxidation on the reliability of a quad flat no-lead package.  - journal of electronic packaging (transaction of the asme).  131(3):0310021-0310027. 

aouache mustapha, aini hussain, salina abd samad,
hamzaini bin abdul hamid, and ahmad kamal ariffin.  (2009).  visual informatics: bridging research and practice.  - .  122-135. 

miloud souiyah, abdulnaser alshoaibi, a. muchtar, a.k. ariffin.  (2009).  two-dimensional finite element method for stress intensity factor using adaptive mesh strategy.  - acta mechanica.  204(1-2):99-108. 

s. m. beden, s. abdullah and a. k. ariffin.  (2009).  modeling of fatigue crack growth under constant and variable amplitude loading.  - international journal of mechanical and materials engineering.  4(2):131-135. 

norie a. akeel, z. sajuri, a. k. ariffin.  (2009).  analysis of stresses and fatigue crack initiation life of wheel / rail contact.  - mini symposium (pre-conference) on fracture and strength of solids feofs 2009.  . 

adril e., abdullah s., ariffin a.k., muchtar a., omar k..  (2009).  comparative study of characteristic of lubricant oils in gasoline and compressed natural gas engines.  - european journal of scientific research.  30(2):282-293. 

rahman, mm; ariffin, ak; jamaludin, n; haron, chc.  (2009).  finite element based vibration fatigue analysis for a new free piston engine component.  - arabian journal for science and engineering.  34(1B):231-246. 

abdullah s., beden s.m., ariffin a.k., al-asady n.a..  (2009).  fatigue crack growth modelling of aluminium alloy under constant and variable amplitude loadings.  - sdhm structural durability and health monitoring.  5(2):109-131. 

beden, s.m., abdullah, s., ariffin, a.k..  (2009).  review of fatigue crack propagation models for metallic components.  - european journal of scientific research.  28(3):364-397. 

al-asady, n.a., abdullah, s., ariffin, a.k., beden, s.m., rahman, m.m..  (2009).  comparison between experimental road data and finite element analysis data for the automotive lower suspension arm.  - european journal of scientific research.  29(4):557-571. 

abdulnaser m. alshoaibi, a.k. ariffin and m.n. almaghribi.  (2009).  development of efficient finite element software of crack propagation simulation using adaptive mesh strategy.  - american journal of applied sciences.  6(4):661-666. 

m.m. rahman, a.k. ariffin, s. abdullah, m.m. noor, rosli a. bakar and m. a. maleque.  (2009).  assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach.  - american journal of applied sciences.  6(4):715-725. 

m.m. rahman, a.k. ariffin, s. abdullah, m.m. noor and rosli a.b.  (2009).  durability assessment of cylinder block for two stroke free piston linear engine using random loading.  - american journal of applied sciences.  6(4):726-735. 

mohammad hosseini fouladi, mohd. jailani mohd. nor, ahmad kamal ariffin, shahrir abdullah.  (2009).  inverse combustion force estimation based on response measurements outside the combustion chamber and signal processing.  - mechanical systems and signal processing.  23(8):2519-2537. 

m.m. rahman, a.k. ariffin, s.s.m. nor.  (2009).  development of a finite element model of metal powder compaction process at elevated temperature.  - applied mathematical modelling.  33(11):4031-4048. 

m.m. rahman, a.k. ariffin, m.r.m. rejab, k. kadirgama and m.m. noor.  (2009).  multiaxial fatigue behavior of cylinder head for a free piston linear engine.  - journal of applied sciences.  9(15):2725-2734. 

h. syifaul & a.k. ariffin.  (2009).  modeling of elastoplastic crack propagation using finite element method with adaptive mesh.  - journal of mechanical engineering uitm.  Vol.5(2),pp.1-13. 

miloud souiyah, a. muchtar, abdulnaser alshoaibi and a.k. ariffin.  (2009).  finite element analysis of the crack propagation for solid materials.  - american journal of applied sciences.  6(7):1396-1402. 

herman pratikno, ahmad kamal ariffin and mariyam jameelah ghazali.  (2009).  influence of injection dc current and seawater salinity to performance several anodes on impressed current cathodic protection (iccp) in marine environment.  - international journal of material science.  4(3):177-189. 

ahmad kadri junoh, zulkifli mohd. nopiah, mohammad hosseini fouladi, mohd. jailani mohd. nor, a.k. ariffin.  (2009).  study to predict noise annoyance level in passenger car cabin interior.  - international conference on applications and design in mechanical engineering (icadme).  . 

s. m. beden, s. abdullah and a. k. ariffin.  (2009).  towards standardising the fatigue crack simulation studies on metallic materials.  - icces.  10(2):41-50. 

mohammad hosseini fouladi, mohd. jailani mohd. nor, ahmad kamal ariffin.  (2009).  spectral analysis methods for vehicle interior vibro-acoustic identification.  - mechanicsl systems and signal processing (mssp).  23(2):489-500. 

n. a. al-asady, s. abdullah, a. k. ariffin, s. m. bedenand m. m. rahman.  (2009).  fea based durability using strain-life models for different medium carbon steel as fabrication materials for an automotive component.  - international journal of mechanical and materials engineering (ijmme).  4(2):141-146. 

ahmad kamal ariffin, kamaruddin abu taib, meor zainal meor talib,shahrir abdullah, hafizah husain, dzuraidah abdul wahab & rosafizah mohamed idrus.  (2009).  pengukuran penilaian pengajaran kursus pensyarah fakulti kejuruteraan & alam bina.  - prosiding seminar pendidikan kejuruteraan dan alam bina 2009.  . 

alshoaibi a.m., hadi m.s.a., ariffin a.k..  (2008).  finite element simulation of fatigue life estimation and crack path prediction of two-dimensional structures components.  - transactions hong kong institution of engineers.  15(1):1-6. 

s. abdullah, n. a. al-asady, a. k. ariffin, m. m. rahman.  (2008).  a review on finite element analysis approaches in durability assessment of automotive components.  - journal of applied sciences.  8(12): 2192-2201. 

a.s.m.z. hasan, r. hamid and a.k. ariffin.  (2008).  damage intensification model of high performance concrete subjected to blast.  - proceedings of the international technical conference jkas-jpz-cau.  . 

a. m. alshoaibi, a. k. ariffin.  (2008).  finite element modeling of fatigue crack propagation using a self adaptive mesh strategy.  - international review of mechanical engineering (ireme).  2(4):537-544. 

hadi m.s.a., ariffin a.k..  (2008).  ki evaluation using displacement etrapolation technique under adaptive dense mesh with parallel finite element.  - proceedings - international symposium on information technology 2008, itsim.  . 

rahman, m.m., arrifin, a.k., nor, m.j.m., abdullah, s..  (2008).  fatigue analysis of spot-welded joint for automative structures.  - sdhm structural durability and health monitoring.  4(3):173-180. 

r. hamid, a. k. ariffin, h. sanusi, s. a. osman, mudiono, rikki vitria.  (2008).  development of method for dynamic characterization of concrete subjected to high strain rate load.  - seminar pemantauan projek gup 2007.  . 

akramin m.r.m., alshoaibi a.m., hadi m.s.a., ariffin a.k., mohamed n.a.n..  (2008).  probabilistic assessment for cracked structures analysis.  - international journal of mechanical and materials engineering.  3(1):1-6. 

nor s.s.m., rahman m.m., tarlochan f., shahida b., ariffin a.k..  (2008).  the effect of lubrication in reducing net friction in warm powder compaction process.  - journal of materials processing technology.  207(1-3):118-124. 

m.j. ghazali, w.m. rainforth, s. abdullah, a.k.a. ihsan & m. hassan.  (2008).  subsurface deformation of worn al-cu and al-mg alloys.  - advanced materials research.  33-37:483-488. 

abu sufian md. zia hasan, roszilah hamid and a. k. ariffin.  (2008).  effect of friction angle and flow ratio on dynamic behaviour of high performance concrete.  - proceedings of international conference on civil engineering 2008(icce`08).  . 

a. k. ariffin, m. r. m. akramin, s. huzni, s. abdullah and m. j. ghazali.  (2008).  probabilistic analysis of cracked structures with uncertainty parameters.  - advanced materials research.  33-37(1):223-228. 

tulus, ahmad kamal ariffin, s. abdullah and norhamidi muhamad.  (2008).  heat transfer analysis in magnet housing of linear generator using finite element method.  - jurnal kejuruteraan.  20:125-133. 

shahrum abdullah, mohamad faizal abdullah and ahmad kamal ariffin.  (2008).  the effect of leadframe oxidation of a quad flat no-lead semiconductor package under cyclic loading.  - journal of applied sciences.  8(9):1676-1683. 

s. abdullah, s. m. beden, a. k. ariffin, m. m. rahman.  (2008).  fatigue life assessment for metallic structure: a case study of shell structure under variable amplitude loading.  - journal of applied sciences.  8(9):1622-1631. 

m. m. rahman, a. k. ariffin, n. jamaludin, c. h. c. haron, rosli a. bakar.  (2008).  fatigue life prediction of two-stroke free piston engine mounting using frequency response approach.  - european journal of scientific research.  22(4):480-493. 

s. abdullah, m.f. abdullah, a.k. ariffin, m.n. baharin, z.a. aziz and m.f. mod yunoh.  (2008).  effect of package delamination under 3-points bending test: a case study using cyclic loading.  - solid state science and technology.  16(2):72-82. 

s. abdullah, m. f. abdullah, a. k. ariffin, m. n. baharin, z. a. aziz and m.f. mod yunoh.  (2008).  comparison in between good and oxidized leadframe: a case study in package delamination analysis.  - solid state science and technology.  16(2):223-231. 

ahmad kamal ariffin, kamaruddin abu taib, meor zainal meor talib.  (2008).  penambahbaikan kaedah soal selidik sppk dan pengajaran pengiraan berangka.  - pendidikan kejuruteraan dan alam bina 2008.  . 

m. s. a. hadi & a. k. ariffin.  (2008).  elastic crack simulation using parallel finite element method.  - seminar on engineering mathematics proceedings. engineering fundamental unit, faculty of engineering & built environment, ukm, 43600 bangi, selangor, malaysia..  . 

syifaul huzni, akramin m. r. m. & a. k. ariffin.  (2008).  crack propagation model for ductile fracture.  - seminar on engineering mathematics proceedings. engineering fundamental unit, faculty of engineering & built environment, ukm, 43600 bangi, selangor, malaysia..  . 

s. abdullah, m.f.abdullah, a.k.ariffin, z.a. aziz, m.j. ghazali.  (2008).  thermal mechanical analysis of a qfn stacked-die leadframe under reflow process.  - international conference of manufacturing engineering and engineering management, world congress on engineering 2008 (wce 2008).  . 

suraya mohd. tahir, ahmad kamal ariffin, norhamidi muhamad and nik abdullah nik mohamed.  (2008).  crack propagation of metal powder compact.  - jurnal kejuruteraan.  20:115-124. 

y. burhanuddin, c.h. che haron, j.a. ghani dan a. k. m. ariffin.  (2008).  taksiran hayat perkakas pada pelarikan aloi titanium dengan perkakas pemotong cbn menggunakan kaedah faktoran pecahan.  - seminar amreg 08, 12 jun 2008.  . 

nuraini abdul aziz, ahmad kamal ariffin mohd. ihsan, mohd. jailani mohd. noor and nordin jamaluddin.  (2008).  application of monte carlo simulation for free piston engine cylinder block design.  - jurnal kejuruteraan.  20: 83-93. 

tulus dan ahmad kamal ariffin.  (2008).  simulation of combustion chamber pressures of two-stroke linear engine.  - jurnal teknik mesin.  8(1):66-77. 

r. hamid, a.k. ariffin, h.sanusi, s.a. osman, mudiono, rikki vitria.  (2008).  development of method for dynamic characterization of concrete subjected to high strain rate load.  - seminar pemantauan projek penyelidikan (gup) 2007.  . 

m. m. rahman, a. k. ariffin, n. jamaludin, s. abdullah & m. m. nor.  (2008).  finite element based fatigue life prediction of a new free piston engine mounting.  - journal of applied sciences.  8(9):1612-1621. 

miloud souiyah, abdulnaser alshoaibi, a. muchtar, a.k. ariffin.  (2008).  finite element model for linear-elastic mixed mode loading using adaptive mesh strategy.  - journal of zhejiang university science a.  9(1):32-37. 

s. ataollahi, c.h. azhari, s.t. taher, a.a. oshkour, a.k. ariffin r. zulkifli.  (2008).  collapse modes of square tube silk/epoxy composite under quasi-static load.  - indonesian nanoletter.  2(3):1-4. 

abdulnaser m. alshoaibi and ahmad kamal ariffin.  (2008).  evaluation of stress intensity factor using displacement correlation techniques.  - jurnal kejuruteraan.  20:75-81. 

alshoaibi a.m., ariffin a.k..  (2008).  fatigue life and crack path prediction in 2d structural components using an adaptive finite element strategy.  - international journal of mechanical and materials engineering.  3(1):97-104. 

abdullah, s; beden, sm; ariffin, ak; nopiah, zm; zaharim, a; rahman, mm.  (2008).  fatigue life assessment of a shell structure from different steel types: a case study using variable amplitude loadings.  - smo 08: proceedings of the 8th wseas international conference on simulation, modeling and optimization.  . 

abdullah, s; refngah, fna; jalar, a; chua, lb; ariffin, ak; zaharim, z.  (2008).  fea-based durability assessment: a case study using a parabolic leaf spring.  - proceedings of the 7th wseas international conference on system science and simulation in engineering (icossse `08) - recent advances in systems science and simulation in engineering.  . 

souiyah miloud, muchtar a., ariffin a.k..  (2008).  the finite element analysis for crack propagation of the elastic materials.  - engineering postgraduate conference 2008, ukm.  . 

m. souiyah, a. alshoaibi, a. muchtar, a. k. ariffin.  (2008).  stress intensity factor evaluation for crack emanating from circular-hole using finite element method.  - international review of mechanical engineering (ireme).  2(4):545-549. 

akramin m.r.m., ariffin a.k., alshoaibi a., hadi m.s.a., huzni s., mohamed n..  (2008).  probabilistic finite element for fracture mechanics.  - transactions hong kong institution of engineers.  15(2):1-8. 

ahmad kamal ariffin mohd ihsan, nik abdullah nik mohamed, fadhlur rahman mohd romlay.  (2008).  dual boundary element method in modeling of fatigue crack propagation.  - jurnal kejuruteraan.  20:45-55. 

mohammad hosseini fouladi, mohd. jailani mohd. nor, ahmad kamal ariffin & shahrir abdullah.  (2007).  mobility analysis of vehicle crankshaft.  - proceedings of noise, vibration and comfort (nvc) 2007, bangi, malaysia.  . 

s. abdullah, m. f. abdullah and a. k. ariffin.  (2007).  fatigue test method for observing the delamination effect in a qfn package.  - proceedings of the 9th electronics packaging technology conference, 11-12 december 2007, singapore.  . 

a. shamsudeen, s. abdullah and a.k. ariffin.  (2007).  numerical analysis of a compressed natural gas direct injection cylinder head engine.  - proceedings of computational & experimental mechanics (cem) 2007, bangi, malaysia.  . 

m. m. rahman; a. k. ariffin and s. abdullah.  (2007).  finite element based vibration fatigue analysis of a new two-stroke linear generator engine component.  - international journal of mechanical and materials engineering.  2(1):63-74. 

rahman m.m., ariffin a.k., abdullah s., rosli a.b..  (2007).  effect of nitriding treatment on fatigue life for free piston linear engine component using frequency response method: a finite element approach.  - sdhm structural durability and health monitoring.  3(4):197-209. 

m. aouache, a. hussain, s. a. samad, hamzaini a.h., a. k. ariffin.  (2007).  active shape modeling of medical images for vertebral fracture computer assisted assessment system.  - the 5th student conference on research and development, scored 2007.  . 

a.k. ariffin, m. r. m. akramin, s. huzni, s. abdullah and m. j. ghazali.  (2007).  probabilistic analysis of cracked structures with uncertainty parameters.  - 7th international conference on fracture & strength of solid, urumiqi china..  . 

rahman m.m., ariffin a.k., mohamed n.a.k..  (2007).  investigate the influences of shot peening on the fatigue life of vibrating cylinder block for a new free piston linear engine.  - international journal of mechanical and materials engineering.  2(1):19-28. 

jaharah a. ghani, baba md deros, jaafar sahari & ahmad kamal ariffin mohd ihsan.  (2007).  pelaksanaan penggunaan rubrik projek ilmiah program sarjana muda kejuruteraan mekanik dan pembuatan.  - seminar pendidikan kejuruteraan dan alam bina 2007.  . 

abu sufian md zia hassan, roszilah hamid, ahmad kamal ariffin mohd ihsan and helmi sanusi.  (2007).  development method for dynamic characterization of high strength concrete.  - seminar penyelidikan siswazah 2007, bangi selangor.  . 

a. k. ariffin and abdulnaser m. alshoaibi.  (2007).  crack propagation simulation and fatigue reliability.  - 3rd asian-pacific congress on computational mechanics.  . 

ahmad kamal ariffin.  (2007).  pengiraan berangka kejuruteraan.  - .  1-131. 

a. hussain, m. a. hannan, a. mohamed, h. sanusi, a.k. ariffin.  (2006).  vehicle crash analysis for airbag deployment decision.  - international journal of automotive technology.  7(2):179-185. 

m a hannan, aini hussain, azah mohamed , hilmi sanusi, a k ariffin, m jailani m noor.  (2006).  prediction of seat occupancy based on class and position for airbag deployment decision.  - european journal of scientific research.  14(2):302-310. 

a. hussain, m. a. hannan, a. mohamed, h. sanusi and a. k. ariffin.  (2006).  vehicle crash analysis for airbag deployment decision.  - international journal of automotive technology.  7(2):179-185. 

a. k. ariffin, n. a. n. mohamed and s. fonna.  (2006).  simulation of free piston linear engine motion with different intake and exhaust port position.  - jurnal kejuruteraan ukm.  18:97-106. 

s. abdullah and a. k. ariffin.  (2006).  accelerated fatigue tests of bs 080a42 steel using the wbe mission loadings.  - key engineering materials.  326-328:1023-1026. 

andanastuti muchtar, mariyam jameelah ghazali, ahmad kamal ariffin mohd. ihsan.  (2006).  pandangan pelajar: isu bahasa pengantar, waktu kuliah dan pengajaran pensyarah.  - seminar pengajaran dan pembelajaran berkesan 2006, esset, bangi.  . 

m. a. hannan, a. hussain, s. a. samad, a. mohamed, d. a. wahab and a. k. ariffin.  (2006).  development of occupant classification and position detection for intelligent safety system.  - international journal of automative technology.  7(7):827-832. 

zaleha binti mohamad, ahmad kamal ariffin mohd ihsan & andanastuti muchtar.  (2006).  simulation of crack propagation trajectory with hole under mode i loading.  - seminar penyelidikan siswazah (sps2006), ukm.  . 

m. m. rahman, a. k. ariffin, n. jamaluddin and c.h.c. haron.  (2005).  vibration fatigue analysis of linear generator engine using frequency response approach.  - proceedings of seminar on advances in malaysian noise vibration and comfort (nvc 2005), 17-18 may 2005.  . 

a.k. ariffin & s.m. tahir.  (2005).  modelling fracture metal powder compaction process.  - viii international conference on computational plasticity complas viii.  . 

m.m. rahman, a.k. ariffin, m.z. yusoff and s. shahriman.  (2003).  establishment of a temperature dependent yield criterion for metal powder.  - 3rd international conference on advances in strategic technologies, kuala lumpur, malaysia.  . 

ahmad kamal ariffin & shahrir abdullah.  (2000).  kaedah berangka kejuruteraan.  - .  256. 

ahmad kamal ariffin mohd. ihsan dan shahrir abdullah.  (2000).  kaedah berangka kejuruteraan.  - .  257.