meor iqram meor ahmad*, zainuddin sajuri, zambri harun, rizauddin ramli, wan fathul hakim wan zamri, abdul hadi azman, nor kamaliana khamis, mohd faizal mat tahir dan mohd anas mohd sabri.  (2023).  pemantauan prestasi akademik pelajar bagi jkmp ukm berdasarkan sistem ihpp.  - persidangan pendidikan kejuruteraan dan alam bina (peka) 2023.  1-13. 

meor iqram meor ahmad, zainuddin sajuri, zambri harun, rizauddin ramli, wan fathul hakim wan zamri, abdul hadi azman, nor kamaliana khamis, mohd faizal mat tahir, mohd anas mohd sabri, norhidayah mat taib.  (2023).  pemantauan prestasi akademik pelajar bagi jabatan kejuruteraan mekanikal dan pembuatan (jkmp) ukm berdasarkan sistem ihpp.  - persidangan penyelidikan pendidikan kejuruteraan dan alam bina 2023 (peka 2023).  143-146. 

matin vafaei, amirhossein mashhuriazar, hamid omidvar, zainuddin sajuri.  (2023).  in-service welding of x70 steel gas pipeline: numerical and experimental investigations.  - journal of materials research and technology.  6907-6918. 

mohammad azlan aripin, zainuddin sajuri, nashrah hani jamadon, amir hossein baghdadi, intan fadhlina mohamed, junaidi syarif, ahmad muhammad aziz, fathin iliana jamhari.  (2023).  microstructure and mechanical properties of selective laser melted 17-4 ph stainless steel; build direction and heat treatment processes.  - materials today communications.  1-13. 

m.a. aripin, z. sajuri, j. syarif, a.h. baghdadi and i.f. mohamed.  (2022).  evaluation of microstructure and porosity for 3d printed stainless steel.  - materials today: proceedings.  3082-3086. 

amro h. altoyuri, junaidi syarif, zainuddin sajuri.  (2022).  deformation behavior of single-crystal magnesium during nano-ecap simulation.  - heliyon.  1-10. 

mohammad azlan aripin, zainuddin sajuri, nashrah hani jamadon, amir hossein baghdadi, junaidi syarif, intan fadhlina mohamed and ahmad muhammad aziz.  (2022).  effects of build orientations on microstructure evolution, porosity formation, and mechanical performance of selective laser melted 17-4 ph stainless steel.  - metals.  1-24. 

faridzah jamaluddin,nizaroyani saibani ,siti maisarah mohd pisal ,dzuraidah abd wahab,hawa hishamuddin ,zainuddin sajuri, rasyikah md khalid.  (2022).  end-of-life vehicle management systems in major automotive production bases in southeast asia: a review.  - sustainability.  1-23. 

mohd. zaidi bin omar;zainuddin bin sajuri;intan fadhlina binti mohamed.  (2022).  effect of equal channel angular pressing on microstructural development and tensile properties of er-modified al-15%mg2si metal matrix composite.  - .  . 

intan fadhlina binti mohamed;mohd. zaidi bin omar;shahrum bin abdullah;zainuddin bin sajuri;wan fathul hakim bin w. zamri;nashrah hani binti jamadon.  (2022).  giant straining of highly commercial aluminum alloys via high-pressure torsion process for vehicle applications.  - .  . 

zainuddin sajuri, nor fazilah mohamad selamat.  (2022).  kimpalan kacau geseran aloi aluminium.  - .  261. 

amir hossein baghdadi, zainuddin sajuri, azadeh keshtgar, nurulakmal mohd sharif and armin rajabi.  (2022).  mechanical property improvement in dissimilar friction stir welded al5083/al6061 joints: effects of post-weld heat treatment and abnormal grain growth.  - materials.  1-14. 

armin rajabi, peter hodgson, mariyam j. ghazali, zainuddin sajuri, alireza almaslow, hamid ahmad mehrabi, amir hossein baghdadi.  (2022).  challenges and solutions in the synthesis of nano-ticn: a review.  - ceramic international.  8921-8929. 

meor iqram meor ahmad, zainuddin sajuri, zambri harun, rizauddin ramli, wan fathul hakim wan zamri, abdul hadi azman, nor kamaliana khamis, mohd faizal mat tahir, mohd anas mohd sabri.  (2022).  pelaksanaan sistem ihpp sebagai kaedah pengukuran dan penilaian hasil pembelajaran: jabatan kejuruteraan mekanikal dan pembuatan ukm.  - knovasi 2022 ukm.  116-119. 

meor iqram meor ahmad, zainuddin sajuri , zambri harun, rizauddin ramli, wan fathul hakim wan zamri , abdul hadi azman, nor kamaliana khamis, mohd faizal mat tahir, mohd anas mohd sabri.  (2022).  pelaksanaan sistem ihpp sebagai kaedah pengukuran dan penilaian hasil pembelajaran: jabatan kejuruteraan mekanikal dan pembuatan ukm.  - knovasi 2022 ukm.  116-119. 

nur shufinah suhaimi, meor iqram meor ahmad, mohd zaki nuawi, mohd hafizi zohari, zainuddin sajuri, aidie zeid muhammad abdullah.  (2022).  the effect of railways speed on the rail track structure strain behaviour using fibre optical sensor.  - 5th international conference on automotive innovation and green energy vehicle (aigev) 2022.  1-15. 

ali ebrahimzadeh pilehrood, amirhossein mashhuriazar, amir hossein baghdadi, zainuddin sajuri, and hamid omidvar.  (2021).  effect of laser metal deposition parameters on the characteristics of stellite 6 deposited layers on precipitation-hardened stainless steel.  - materials.  1-14. 

a.m. aziz, m.z. omar, z. sajuri.  (2021).  strength of thixoformed a319 alloy at elevated temperature.  - metals and materials international.  2416-2429. 

wan aizon w ghopa, zainuddin sajuri, mohd radzi abu mansor, azhari shamsudeen, shahrum abdullah, mohd zaidi omar, mohd esa baruji & mohd atif sholehuddin.  (2021).  statistik kemalangan pekerjaan melibatkan jentera berat di malaysia.  - jurnal kejuruteraan.  773-783. 

amirhossein mashhuriazar, c. hakan gur, zainuddin sajuri, hamid omidvar.  (2021).  effects of heat input on metallurgical behavior in haz of multi-pass and multi-layer welded in-939 superalloy.  - journal of materials research & technology.  1590-1603. 

hardip singh gendeh; salina husain; zainuddin sajuri.  (2021).  perisai untuk pakar bedah ent.  - harian metro newspaper.  41. 

n.a. alang, j. alias, z. sajuri, s. nur atiqah.  (2021).  finite element modelling of creep rupture on grade 91 steel using monkman-grant ductility based damage model.  - international journal of integrated engineering.  108-118. 

zainuddin bin sajuri;ahmad kamal ariffin bin mohd ihsan;mohd. zaidi bin omar;shahrum bin abdullah.  (2021).  computationally inverse model for the fatigue and fracture characterization of structural steel materials in corrosive environment.  - .  . 

zainuddin sajuri, shahrum abdullah, mohd zaidi omar, mohd radzi abu mansor, wan aizon w ghopa, azhari shamsudeen, mohd atif sholehuddin, mohd esa baruji.  (2021).  kajian kompetensi pekerja terhadap jentera berat (heavy machinery) laporan akhir.  - .  1-193. 

andanastuti muchtar;masfueh binti razali;zainuddin bin sajuri;yew hsu zenn;nashrah hani binti jamadon.  (2021).  wear resistance and mucotoxicity evaluation of novel nanozirconia for dental applications.  - .  . 

mohd radzi abu mansor, zainuddin sajuri, wan aizon w ghopa, azhari shamsudeen, shahrum abdullah, mohd zaidi omar, mohd esa baruji, mohd atif sholehuddin.  (2021).  safety competency on heavy machinery: a comparison study between the importance and practices from site supervisor perceptions.  - journal of occupational safety and health.  57-66. 

n.f.m. selamat, a.h. baghdadi, z. sajuri, s. junaidi and a.h. kokabi.  (2020).  rolling effect on dissimilar friction stir welded aa5083-aa6061 aluminium alloy joints.  - journal of advanced manufacturing technology.  49-61. 

zainuddin bin sajuri;mastor bin surat;mazlan bin mohd tahir;rizauddin bin ramli;nor haslina binti ja`afar.  (2020).  mereka bentuk dan membina purwarupa kediaman bagi tujuan mendapatkan tajaan dana untuk pembinaan kediaman sementara bagi mangsa banjir.  - .  . 

norhamidi bin muhamad;abu bakar bin sulong;zainuddin bin sajuri;zaliha binti wahid;intan fadhlina binti mohamed;farhana binti mohd foudzi.  (2020).  magnetic – non-magenetic layered bi-material through co-powder injection moulding (co-pim).  - .  . 

zainuddin bin sajuri;che husna bt. azhari;andanastuti muchtar;rozli bin zulkifli;mohd. zaidi bin omar;shahrum bin abdullah;mariyam jameelah binti ghazali;abu bakar bin sulong;intan fadhlina binti mohamed.  (2020).  development of light weight materials for ballistic applications in tropical climates.  - .  . 

lyu yao, yu lih jiun, khairiah haji badri, zuliani zulkoffli, zainuddin sajuri, muhammad zhafarin firdaus zulkefly, mouad a. tarawneh.  (2020).  characterization of biomass-reinforced biopolyol-based polyurethane foams.  - international journal of nanoelectronics and materials.  95-106. 

fadzilah adnan, zainuddin sajuri, amir hossein baghdadi, mohd zaidi omar.  (2020).  effects of rapid heating and uniaxial loading on the phase transformation and mechanical properties of direct partial remelted butt joint of aisi d2 tool steel.  - materials science & engineering a.  1-12. 

junaidi syarif, mohammad h. yousuf, zainuddin sajuri, amir hossein baghdadi, mahdi merabtene and mohd zaidi omar.  (2020).  effect of partial solution treatment temperature on microstructure and tensile properties of 440c martensitic stainless steel.  - metals.  1-14. 

m.n. mohammed, m.z. omar, z. sajuri, and salah al-zubaidi.  (2020).  characterization of metallurgical and mechanical properties of thixowelded aisi d2 and aisi 304 steels.  - journal of materials engineering and performance.  739-749. 

m. a. m. arif, m. z. omar, z. sajuri, m. s. salleh.  (2020).  effects of cu and mg on thixoformability and mechanical properties of aluminium alloy 2014.  - transactions of nonferrous metals society of china.  275-287. 

ali ebrahimzadeh pilehrood, hamid omidvar, ali shamsipur, zainuddin sajuri.  (2020).  influence of transient liquid phase bonding followed by homogenization on the fatigue lifetimes of inconel 738 at elevated temperature.  - journal of manufacturing processes.  348-358. 

zainuddin sajuri, nor fazilah mohamad selamat, amir hossein baghdadi, armin rajabi, mohd zaidi omar, amir hossein kokabi and junaidi syarif.  (2020).  cold-rolling strain hardening effect on the microstructure, serration-flow behaviour and dislocation density of friction stir welded aa5083.  - metals.  1-16. 

davood zamani, azmah hanim mohamed ariff, ghasem dini, zainuddin sajuri and nur ismarrubie zahari.  (2020).  tensile properties and microstructure of fe-17mn-2al-0.6c twip steel.  - malaysian journal of microscopy.  56-65. 

amirhossein mashhuriazar, hamid omidvar, c. hakan gur, zainuddin sajuri.  (2020).  effect of welding parameters on the liquation cracking behavior of high-chromium ni-based superalloy.  - journal of materials engineering and performance.  7843-7852. 

amir hossein baghdadi, zainuddin sajuri, mohd zaidi omar and armin rajabi.  (2020).  friction stir welding parameters: impact of abnormal grain growth during post weld heat treatment on mechanical properties of al-mg-si welded joints.  - metals.  1-18. 

nora osman, zainuddin sajuri, intan fadhlina mohameda, mohd zaidi omara & syarif junaidi.  (2020).  effect of intercritical annealing on the microstructural and mechanical behaviours of dual-phase steels.  - jurnal kejuruteraan.  629-636. 

zainuddin sajuri, shahrum abdullah, mohd zaidi omar, mohd radzi abu mansor, wan aizon wan ghopa, azhari shamsudeen.  (2020).  kajian kompetensi kajian kompetensi pekerja terhadap jentera berat (heavy machinery).  - laporan perundingan ukm-niosh.  1-163. 

amirhossein mashhuriazar, hamid omidvar, zainuddin sajuri, c. hakan gur and amir hossein baghdadi.  (2020).  effects of pre-weld heat treatment and heat input on metallurgical and mechanical behaviour in haz of multi-pass welded in-939 superalloy.  - metals.  1-17. 

zainuddin sajuri, intan fadhlina mohamed.  (2020).  analisis fraktografi dan metalografi bagi struktur header steel duplex.  - .  1-33. 

m.a.m arif, m.z. omar & z. sajuri.  (2020).  kebolehbentukan-tikso aloi 2014 dengan penambahan si dan pengurangan cu.  - sains malaysiana.  179-188. 

zainuddin sajuri, wan fathul hakim w zamri, nor kamaliana khamis, mariyam jameelah ghazali, hawa hishamuddin, azhari shamsudeen, farhana mohd foudzi.  (2019).  book of abstracts : apsim 2019.  - 6th international conference on advanced processes and systems in manufacturing.  1-38. 

fadzilah adnan, zainuddin sajuri, mohd zaidi omar.  (2019).  effect of uniaxial load on microstructure and mechanical properties of thixo-joint aisi d2 tool steel.  - journal of mechanical engineering and sciences.  5006-5020. 

amir hossein baghdadi, zainuddin sajuri, nor fazilah mohamad selamat, mohd zaidi omar, yukio miyashita, and amir hossein kokabi.  (2019).  effect of intermetallic compounds on the fracture behavior of dissimilar friction stir welding joints of mg and al alloys.  - international journal of minerals, metallurgy and materials.  1285-1298. 

amir hossein baghdadi, armin rajabi, nor fazilah mohamad selamat, zainuddin sajuri, mohd zaidi omar.  (2019).  effect of post-weld heat treatment on the mechanical behavior and dislocation density of friction stir welded al6061.  - materials science & engineering a.  728-734. 

nora osman, zainuddin sajuri, amir hossein baghdadi and mohd zaidi omar.  (2019).  effect of process parameters on interfacial bonding properties of aluminium copper clad sheet processed by multi-pass friction stir welding technique.  - metals.  1-19. 

nor fazilah mohd selamata, amir hossein baghdadi, zainuddin sajuri, amir hossein kokabi.  (2019).  weldability and mechanical properties of dissimilar al-mgsi to pure aluminium and al-mg using friction stir welding process.  - jurnal teknologi.  143-149. 

mohd anif mohd arif, mohd zaidi omar & zainuddin sajuri.  (2018).  pembentukan mikrostruktur berbentuk sfera dalam keadaan separa pepejal aloi aluminium al-4.8si-2.8cu-0.5mg.  - jurnal kejuruteraan.  . 

junaidi syarif, nofriady handra, zainuddin sajuri, mohd zaidi omar.  (2018).  change in tensile properties of dual-phase steels by cu addition.  - transactions of the indian institute of metals.  513-519. 

norfazilah mohd selamat, amir hossein baghdadi, zainuddin sajuri, amir hossein kokabi, syarif junaidi.  (2018).  effect of rolling on strength of friction stir welded joint of aluminium alloys.  - jurnal kejuruteraan.  9-15. 

amir hossein baghdadi, nor fazilah mohamad selamat, zainuddin sajuri and amir hossein kokabi.  (2018).  effect of travel speed on quality and welding efficiency of friction stir welded az31b magnesium alloy.  - international journal of engineering & technology.  94-99. 

mohd. zaidi bin omar;shahrum bin abdullah;mariyam jameelah binti ghazali;zainuddin bin sajuri;wan aizon bin w ghopa.  (2018).  thixoforming of novel aluminium alloys.  - .  . 

najihah abdul rahman, shahrum abdullah, mohamad faizal abdullah, wan fathul hakim zamri, mohd zaidi omar and zainuddin sajuri.  (2018).  experimental and numerical investigation on the layering configuration effect to the laminated aluminium/steel panel subjected to high speed impact test.  - metals.  . 

hend ali omar, nur izzi md. yusoff, halil ceylan, irman abdul rahman, zainuddin sajuri, fauzan mohd jakarni, amiruddin ismail.  (2018).  determining the water damage resistance of nano-clay modified bitumens using the indirect tensile strength and surface free energy methods.  - construction and building materials.  391-402. 

nora osman, zainuddin sajuri and mohd zaidi omar.  (2018).  multi-pass friction stirred clad welding of dissimilar joined aa6061 aluminium alloy and brass.  - journal of mechanical engineering and sciences.  4285-4299. 

fadzilah adnan, zainuddin sajuri and zaidi omar.  (2018).  a study of microstructural evolution of aisi d2 tool steel during direct partial remelting method.  - international journal of mechanical engineering and robotics research.  689-693. 

ukwueze, bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri.  (2018).  solvent de-binding of bi-material green component of two-component powder injection moulded stainless steel and zirconia.  - international journal of mechanical & mechatronics engineering.  . 

mohd najib muhamed, mohd zaidi omar, shahrum abdullah, zainuddin sajuri and wan fathul hakim wan zamri.  (2018).  investigation of low-velocity impact and flexural loading on ar500 steel/aa7075 aluminum alloy brazed joint.  - songklanakarin journal of science and technology.  . 

m.f. abdullah, s. abdullah, m.z. omar, z. sajuri & m.s. risby.  (2018).  observing the behaviour of reinforced magnesium alloy with carbon-nanotube and lead under 976 m/s projectile impact.  - journal of mechanical engineering.  . 

hawa hishamuddn, nizaroyani saibani, dzuraidah abdul wahab & zainuddin sajuri.  (2018).  effectiveness of simulation games to enhance student understanding in current manufacturing systems.  - k novasi p&p ukm 2018.  1-4. 

zambri harun, wan fathul hakim wan zamri, abu bakar sulong dan zainuddin sajuri.  (2018).  implementation of cornerstone courses in order to enhance complex problem solving attributes.  - prosiding peka 2017. k-novasi pengajaran dan pembelajaran ukm 2018: pendidikan 4.0: graduan kalis masa depan.  . 

mohd najib muhamed, mohd zaidi omar, shahrum abdullah, zainuddin sajuri, wan fathul hakim wan zamri and mohd faizal abdullah.  (2018).  brazed joint interface bonding strength of ar500 steel and aa7075 aluminium alloy.  - metals.  . 

farah hafizah hamka, nizaroyani saibani, mohd nizam ab rahman, hawa hishamuddin, zainuddin sajuri, zambri harun.  (2018).  development of a physical simulation game in global supply chain issues.  - prosiding peka 2017. k-novasi pengajaran dan pembelajaran ukm 2018: pendidikan 4.0: graduan kalis masa depan.  . 

najihah abdul rahman, shahrum abdullah, mohamad faizal abdullah, mohd zaidi omar, zainuddin sajuri, wan fathul hakim zamri.  (2018).  ballistic limit of laminated panels with different joining materials subjected to steel-hardened core projectile.  - international journal of integrated engineering.  . 

zambri harun, nizaroyani saibani, mohd rasidi rasani, zainuddin sajuri.  (2017).  how realistic are the eac measurements?.  - journal of engineering science and technology.  58-66. 

j. a. wahab,m. j. ghazali, z. sajuri, y. otsuka, m. jayaprakash, s. nakamura, a. f. s. baharin.  (2017).  effects of micro-grooves on tribological behaviour of plasma-sprayed alumina-13%titania coatings.  - ceramic international.  6410-6416. 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri.  (2017).  the characterization and rheological investigation of materials for powder injection molding.  - journal of mechanical engineering.  97-107. 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri & farrahshaida salleh.  (2017).  two component injection moulding of bimaterial of stainless steel and yttria stabilized zirconia green part.  - jurnal kejuruteraan.  49-55. 

hend ali omar, nur izzi md yusoff, zainuddin sajuri, halil ceylan, fauzan mohd jakarni, amiruddin ismail.  (2017).  advances in materials processing and integrity: non metals and hybrids.  - .  22. 

shahrum abdullah, mohd zaidi omar, zainuddin sajuri, baba md deros, kamal halili hassan, rozanah ab rahman, mohd radzi abu mansor, wan aizon w ghopa, wan fathul hakim w zamri & azhari shamsudeen.  (2017).  laporan interim 2: kajian penambahbaikan sistem pengurusan keselamatan kren menara di sektor pembinaan.  - .  . 

m. n. muhamed, m. z. omar, s. abdullah , z. sajuri, w. f. h. w. zamri.  (2017).  the effect of surface texture on the joint shear strength of ar500 steel and aa7075.  - journal of mechanical engineering.  . 

zambri harun, nizaroyani saibani, mohd rasidi rasani and zainuddin sajuri.  (2017).  how realistic are the eacs competencies measurements?.  - prosiding k-novasi pengajaran dan pembelajaran ukm (pendidikan kejuruteraan dan alam bina) 2017.  242-250. 

ammar adil al-bakri, zainuddin sajuri, ahmad kamal ariffin, mohammed abdul razzaq and mohd salehudin fafmin.  (2017).  fatigue properties of strained thin 304 stainless steel sheets.  - international journal of automotive and mechanical engineering.  4171-4182. 

amir hossein baghdadi, nor fazilah mohamad selamat, zainuddin sajuri.  (2017).  effect of tool offsetting on microstructure and mechanical properties dissimilar friction stir welded mg-al alloys.  - joining and welding symposium 2017 (iop conf. series: materials science and engineering).  1-9. 

w. n. m. jamil, z. sajuri, s. abdullah, m. a. aripin, m. z. omar, m.f. abdullah, w. f. h. zamri.  (2017).  effect of steel fibres and wire mesh reinforcement on flexural strength and strain energy steel-epoxy-aluminium composite laminates.  - journal of mechanical engineering.  10-20. 

n.a. rahman, m.f. abdullah, s. abdullah, w.f.h. zamri, m.z. omar, z. sajuri.  (2017).  characterising ballistic limits of lightweight laminated-structure as a protective panel for armoured vehicle.  - journal of mechanical engineering.  20-34. 

shahrum abdullah, mohd zaidi omar, zainuddin sajuri, baba md deros, azhari shamsudeen, mohd radzi abu mansor, wan aizon wan ghopa, wan fathul hakim w. zamri, kamal halili hassan & rozanah ab rahman.  (2017).  kajian penambahbaikan sistem pengurusan keselamatan kren menara di sektor pembinaan.  - .  . 

shahrum abdullah, mohd zaidi omar, zainuddin sajuri, baba md deros, azhari shamsudeen, mohd radzi abu mansor, wan aizon wan ghopa, wan fathul hakim w. zamri, kamal halili hassan & rozanah ab rahman.  (2017).  profil kemalangan kren menara.  - .  . 

muhamed m.n., omar m.z., abdullah s., sajuri z., zamri w.f.h., rahman m.a.i.a., abdullah m.f..  (2016).  investigation on brazing interface bonding characteristic of aa7075 and aa6061 aluminum alloy with ar500 steel using al-si-zn filler metal.  - jurnal teknologi.  129-135. 

muhammad reza, zainuddin sajuri, jumril yunas and syarif junaidi.  (2016).  effect of sputtering target`s grain size on the sputtering yield, particle size and coercivity (hc) of ni and ni20al thin films.  - iop conf. series: materials science and engineering/2nd international manufacturing engineering conference and 3rd asia-pacific conference on manufacturing systems (imec-apcoms 2015).  1-6. 

reza m., sajuri z., yunas j., syarif j..  (2016).  effect of sputtering target`s grain size on the sputtering yield, particle size and coercivity (hc) of ni and ni20al thin films.  - iop conference series: materials science and engineering.  1-6. 

w.n.m. jamil, m.a. aripin, z. sajuri, s. abdullah, m.z. omar, m.f. abdullah and w.f.h. zamri.  (2016).  mechanical properties and microstructures of steel panels for laminated composites in armoured vehicles.  - international journal of automotive and mechanical engineering.  3742-3753. 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad & zainuddin sajuri.  (2016).  rheological investigation of powder injection molding materials using polyethylene with palm stearin binder system.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

abdullah m.f., abdullah s., omar m.z., sajuri z., sohaimi r.m..  (2016).  fatigue life of the magnesium alloy az31b under specific spectrum loading.  - materialpruefung/materials testing.  200-205. 

latif n.a., sajuri z., syarif j., miyashita y..  (2016).  effect of loading rate on fracture behaviour of mg-al-zn alloys.  - jurnal teknologi.  83-89. 

ahmad muhammad aziz, mohd zaidi omar, zainuddin sajuri and mohd shukor salleh.  (2016).  microstructural morphology of rheocast a319 aluminium alloy.  - advances in mechanical engineering.  1-10. 

hend ali omar, nur izzi md. yusoff, halil ceylan, zainuddin sajuri, fauzan mohd jakarni, amiruddin ismail.  (2016).  investigation of the relationship between fluidity and adhesion strength of unmodified and modified bitumens using the pull-off test method.  - construction and building materials.  140-148. 

j. a. wahab, m. j. ghazali, w. m. w. yusoff and z. sajuri.  (2016).  enhancing material performance through laser surface texturing: a review.  - transactions of the imf.  193-198. 

hend ali omar, nur izzi md. yusoff, zainuddin sajuri, halil ceylan, fauzan mohd jakarni and amiruddin ismail.  (2016).  determining the effects of ageing on halloysite nano-tube modified binders through the pull-off test method.  - construction and building materials.  245-252. 

n.f.m. selamat, a.h. baghdadi, z. sajuri and a.h. kokabi.  (2016).  friction stir welding of similar and dissimilar aluminium alloys for automotive applications.  - international journal of automotive and mechanical engineering (ijame).  3401-3412. 

shahrum abdullah, mohd zaidi omar, zainuddin sajuri, baba md deros, kamal halili hassan, rozanah ab rahman, mohd radzi abu mansor, wan aizon wan ghopa, wan fathul hakim w. zamri & azhari shamsudeen.  (2016).  laporan awal: kajian penambahbaikan sistem pengurusan keselamatan kren menara di sektor pembinaan.  - .  . 

shahrum abdullah, mohd zaidi omar, zainuddin sajuri, baba md deros, kamal halili hassan, rozanah ab rahman, mohd radzi abu mansor, wan aizon wan ghopa, wan fathul hakim w zamri & azhari shamsudeen.  (2016).  laporan interim 1: kajian penambahbaikan sistem pengurusan keselamatan kren menara di sektor pembinaan.  - .  . 

rahman m.a.i.a., omar m.z., abdullah s., sajuri z., zamri w.f.h., muhamed m.n., abdullah m.f..  (2016).  effects of wetting time on properties of steel-aluminium brazed joint.  - jurnal teknologi.  51-55. 

al-bakri a.a., sajuri z., ariffin a.k., razzaq m.a., fafmin m.s..  (2016).  tensile and fracture behaviour of very thin 304 stainless steel sheet.  - jurnal teknologi.  45-50. 

aziz a.m., omar m.z., sajuri z., salleh m.s..  (2016).  microstructural changes of aluminium alloy a319 on cooling slope plate.  - jurnal teknologi.  121-127. 

rahman n.a., abdullah s., zamri w.f.h., abdullah m.f., omar m.z., sajuri z..  (2016).  ballistic limit of high-strength steel and al7075-t6 multi-layered plates under 7.62-mm armour piercing projectile impact.  - latin american journal of solids and structures.  1658-1676. 

aripin m.a., sajuri z., abdullah s., omar m.z., zamri w.f.h., jamil w.n.m., abdullah m.f..  (2016).  microscale groove effect on shear strength of epoxy-bonded dissimilar metal plate.  - journal of adhesion science and technology.  2001-2012. 

mohamad faizal abdullah, shahrum abdullah, mohd zaidi omar, zainuddin sajuri and risby mohd sohaimi.  (2015).  failure observation of the az31bmagnesium alloy and the effect of leadaddition content under ballistic impact.  - advances in mechanical engineering.  1-13. 

hend ali omar, nur izzi md. yusoff, zainuddin sajuri, halil ceylan, fauzan mohd jakarni and amiruddin ismail.  (2015).  evaluating the effect of mixing process on nano-clay modified binders using the pull-off test method.  - applied mechanics and materials.  357-362. 

m. n. mohammed, m. z. omar, z. sajuri, m. s. salleh and k. s. alhawari.  (2015).  trend and development of semisolid metal joining processing.  - advances in materials science and engineering.  1-13. 

wan fathul hakim w zamri, zainuddin sajuri.  (2015).  numerical computations v-lecture competition (ncvc).  - karnival inovasi pengajaran dan pembelajaran (k-novasi) - pingat emas.  . 

m.n. mohammed, m. z. omar, j. syarif, z. sajuri, m. s. salleh, k. s. alhawari.  (2015).  semi-solid joining of d2 cold-work tool steel.  - solid state phenomena.  355-360. 

abdullah m.f., abdullah s., omar m.z., sajuri z., risby m.s..  (2015).  analysis of variable strain amplitude response caused by impact loading of carbon nanotube reinforced magnesium alloy az31b.  - procedia engineering.  10-17. 

shahrum abdullah, jaharah ab ghani, norhamidi muhamad, dzuraidah abd wahab, zainuddin sajuri, abu bakar sulong, wan fathul hakim w. zamri, abdullah zawawi mohamad, zaliha wahid.  (2014).  kkkp 4415 projek industri : kajian kes penilaian kejuruteraan kompleks dalam program pembuatan.  - kongres pengajaran dan pembelajaran ukm 2013 / pusat penyelidikan pendidikan kejuruteraan, fakulti kejuruteraan dan alam bina ukm.  . 

zainuddin sajuri, amirhossein baghdadi, muhammad faisal mahmod and junaidi syarif.  (2014).  fatigue and mechanical properties of aluminium-copper bi-metal tubes.  - advanced materials research / trans tech publications.  . 

m.n. mohammed, m.z. omar, j. syarif, z. sajuri, m.s. salleh & k.s. alhawari.  (2014).  microstructural properties of semisolid welded joints for aisi d2 tool steel.  - jurnal kejuruteraan.  31-34. 

shahrum abdullah, jaharah a ghani,wan mohd faizal wan mahmood, zainuddin sajuri, abu bakar sulong, wan fathul hakim w. zamri, abdullah zawawi mohamad.  (2014).  cadangan pembangunan rubrik untuk penilaian kejuruteraan kompleks dalam projek ilmiah.  - kongres pengajaran dan pembelajaran ukm 2013 / pusat penyelidikan pendidikan kejuruteraan, fakulti kejuruteraan dan alam bina ukm.  . 

noradila abdul latif, zainuddin sajuri, junaidi syarif, yukio miyashita and yoshiharu mutoh.  (2014).  effect of strain rate on tensile and work hardening properties for al-zn magnesium alloys.  - international journal of materials engineering innovation.  5(1): 28-37. 

n. abdul latif, z. sajuri & j. syarif.  (2014).  effect of aluminium content on the tensile properties of mg-al-zn alloys.  - jurnal kejuruteraan (journal of engineering).  35-39. 

a.h. baghdadi, i.s. misran, z. sajuri & j. syarif.  (2014).  tensile properties and strain response of cu-al bi-metal tube.  - jurnal kejuruteraan (journal of engineering).  41-44. 

j. syarif, t.n. rohmannudin, m.z. omar, z. sajuri, s. harjanto.  (2013).  stability of the beta phase in ti-mo-cr alloy fabricated by powder metallurgy.  - journal of mining and metallurgy,section b:metallurg.  49(3)B:285-292. 

a l noradila, z sajuri, j syarif, y miyashita and y mutoh.  (2013).  effect of strain rates on tensile and work hardening properties for al-zn magnesium alloys.  - iop conference series : materials science and engineering.  . 

m. j. ghazali, a. jemat, z. sajuri, a. k. a. mohd ihsan, j. a. ghani, w. m. f. w. mahmood, t. i. mohamad.  (2013).  taught masters of engineering programme student perceptions on research methodology course in research project.  - international conference on engineering education (icee) 2013.  . 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, ahmad kamal ariffin mohd ihsan, jaharah ab ghani, mohd anas mohd sabri, zainuddin zajuri, shahrum abdullah, abu bakar sulong.  (2013).  direct measurement and evaluation for mechanical engineering programme outcomes: impact on continuous improvement.  - international education studies.  161-167. 

junaidi syarif, eko kurniawan, zainuddin sajuri & mohd zaidi omar.  (2013).  influence of iron on phase stability and corrosion resistance of ti-15%cr alloy.  - sains malaysiana.  42(12):1775-178. 

amirhossein baghdadi, zainuddin sajuri and junaidi syarif.  (2013).  study on microstructure and tensile properties of new cu-al bi-metal tubes versus pure copper tubes.  - applied mechanics and materials / trans tech publications.  . 

m. n. mohammed, m. z. omar, j. syarif, z. sajuri, m. s. salleh, and k. s. alhawari.  (2013).  microstructural evolution during dprm process of semisolid ledeburitic d2 tool steel.  - scientific world journal.  2013:Article ID 828926. 

junaidi syarif, agung iswadi, mariyam jameelah ghazali, zainuddin sajuri, mohd zaidi omar.  (2013).  wear behavior of copper-containing ferritic iron under a dry sliding condition.  - journal of zhejiang university - science a.  14(14):906-914. 

nor kamaliana khamis, ahmad kamal ariffin mohd ihsan, shahrum abdullah, nur farah liza ramli, dan zainuddin sajuri.  (2012).  soal selidik pencapaian objektif program dan hasil pembelajaran program alumni jabatan kejuruteraan mekanik dan bahan melalui kaedah atas talian.  - kongres pengajaran & pembelajaran ukm 2012.  . 

o. bapokutty, z. sajuri and j. syarif.  (2012).  stress relaxation behavior of heat treated inconel 718.  - journal of applied sciences.  12(9):870-875. 

ahmad nasiruddin abdul razak, salina abdul samad, hafizah husain, zainuddin sajuri.  (2012).  defect detection on perpendicular dual tire treadle sensor utilizing supervized neural network.  - international conference on engineering and built environment (icebe) 2012.  . 

salih a.a., omar m.z., syarif j., sajuri z..  (2012).  an investigation on the microstructure and mechanical properties of quenched and tempered ss440c martensitic stainless steel.  - international journal of mechanical and materials engineering.  7(2):119-123. 

n. a. akeel, z. sajuri and a. k. ariffin.  (2012).  prediction of fatigue crack propagation of rail material using 2d finite element modeling.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials).  . 

mohd faizal mat tahir, zaliha wahid, zainuddin sajuri, shahrum abdullah, jaharah ab. ghani, ahmad kamal ariffin mohd ihsan, abu bakar sulong, mohd anas mohd sabri, norkamaliana khamis.  (2012).  pengukuran dan penilaian secara langsung bagi hasil pembelajaran kursus di jabatan kejuruteraan mekanik dan bahan : kesan terhadap penambahbaikan berterusan..  - kongres pengajaran dan pembelajaran ukm 2012 - seminar pendidikan kejuruteraan dan alam bina 2012.  . 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, zainuddin sajuri, shahrum abdullah, ahmad kamal ariffin mohd ihsan, abu bakar sulong, jaharah ab ghani, mohd anas mohd sabri.  (2012).  pengukuran dan penilaian secara langsung bagi hasil program kejuruteraan mekanik : kesan terhadap penambahbaiakan berterusan.  - kongres pengajaran dan pembelajaran ukm 2012 -seminar pendidikan kejuruteraan dan alam bina 2012.  . 

abdul razzaq m., ariffin a.k., al-shafie a., abdullah s., sajuri z., kadhim n.a..  (2011).  fatigue life modelling under constant amplitude loading using adaptive neuro - fuzzy (anfis) application.  - australian journal of basic and applied sciences.  5(8):1194-1204. 

m. abdulrazzaq, a. k. ariffin, s. abdullah, z. sajuri.  (2011).  crack closure behavior under high-load ratio for aisi 4340 steel.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials).  . 

m. abdulrazzaq, a. k. ariffin, s. abdullah, z. sajuri, a.e ismail and a. ariffin.  (2011).  fatigue crack growth prediction of thick wall cylinder under variable amplitude loading.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials).  . 

z. sajuri1, a.r.said1, m.l.ibrahim and j.syarif.  (2011).  premature failure of gas turbine blade.  - key engineering materials.  . 

m. abdulrazzaq, a. k. ariffin, ahmed el-shafie, s. abdullah, z. sajuri & n.a. akeel.  (2011).  adaptive neural network modelling in fatigue life prediction under load history effects.  - advanced materials research.  . 

z. sajuri, n. a. alang, n. a. razak and m.a. aziman.  (2011).  fracture toughness and fatigue crack growth behavior of rail track material.  - key engineering materials.  . 

salih, a.a., omar, m.z., junaidi, s., sajuri, z..  (2011).  effect of different heat treatment on the ss440c martensitic stainless steel.  - australian journal of basic and applied sciences.  5(12):867-871. 

wan nur azrina wan muhammad, zainuddin sajuri, yoshiharu mutoh, yukio miyashita.  (2011).  microstructure and mechanical properties of magnesium composites prepared by spark plasma sintering technology.  - journal of alloys and compounds.  509(20):6021-6029. 

akeel, n.a., sajuri, z., ariffin, a.k..  (2011).  analysis of rolling contact fatigue damage initiation at the wheel-rail interface.  - australian journal of basic and applied sciences.  5(12):937-945. 

i. agung, j. syarif, m.j. ghazali, z. sajuri.  (2011).  effect of cu particles precipitation on wear behaviour of fe-3mass%cu under dry sliding condition.  - key engineering materials.  . 

abdulrazzaq m., ariffin a.k., el-shafie a., abdullah s., sajuri z., akeel n.a..  (2011).  adaptive neural network modelling in fatigue life prediction under load history effects.  - 2011 international conference on advanced engineering materials and technology, aemt 2011; sanya; 29 july 2011 through 31 july 2011 (advanced materials research).  . 

akeel, n.a., sajuri, z., ariffin, a.k., abdulrazzaq, m..  (2011).  three dimensional simulations on stress distribution and fatigue damage life of wheel/rail contact region.  - 2011 international conference on advanced engineering materials and technology, aemt 2011; sanya (advanced materials research).  . 

o. bapokutty, z. sajuri, j. syarif and a.r. said.  (2011).  fracture behavior of inconel 718 at high temperature.  - key engineering materials.  . 

m. a. m. daud, m. z. omar, j. syarif and z. sajuri.  (2010).  critical stress intensity factor determination for az61 magnesium alloy.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials).  . 

n. a. akeel, m. a. aziman, z. sajuri, a. k. ariffind and a. w. ikhsan.  (2010).  identification of damages and stress analysis of rail/wheel rolling contact region.  - key engineering materials - 8th international conference on fracture and strength of solids 2010.  . 

o.bapokutty, a.r. said, j.syarif and z.sajuri.  (2010).  fracture behavior of inconel 718 at high temperature.  - 8th international conference on fracture and strength of solids 2010.  . 

alfan, a., omar, m.z., syarif, j., sajuri, z..  (2010).  direct partial remelting of xw-42 steel in semi-solid zone.  - journal of applied sciences.  10(13),1255-1262. 

z. sajuri, n. a. alang, n. a. razak and m.a. aziman.  (2010).  fracture toughness and fatigue crack growth behavior of rail track material.  - 8th international conference on fracture and strength of solids 2010.  . 

m.a.m. daud, z. sajuri, j. syarif, m.z. omar.  (2010).  effect of solution treatment on fatigue crack propagation behaviour of magnesium alloy.  - international review of mechanical engineering (ireme).  4(3):238-243. 

mohd ahadlin mohd daud, mohd zaidi omar, junaidi syarif
zainuddin sajuri.  (2010).  effect of wire-edm cutting on fatigue strength of az61 magnesium alloy.  - jurnal mekanikal.  30:68-76. 

i. agung, j. syarif, m.j. ghazali & z. sajuri.  (2010).  effect of cu particles precipitation on wear behaviour of fe-3wt% cu under dry sliding condition.  - proc. of 8th international conference on fracture & strength of solids 2010, kuala lumpur.  . 

o. bapokutty, z. sajuri and j. syarif.  (2010).  stress relaxation behaviour and mechanism of heat treated inconel 718 in high temperature environments.  - 4th malaysian powder metallurgy & malaysian metallurgical conference 2010.  . 

junaidi syarif & zainuddin sajuri.  (2010).  effect of copper addition on grain refinement of austenite in fe-8wt.%ni-(0-3)wt.%cu alloy.  - sains malaysiana.  39(6)(2010): 999?1006. 

z. sajuri, m.a.m. daud, m.z. omar & j. syarif.  (2010).  dynamic fracture toughness of an extruded az61 magnesium alloy.  - proceeding of international conference of applied mechanics, materials and manufacturing (icammm 2010), oman.  . 

zainuddin sajuri, muhamed allafi and mohd faiz sudar.  (2009).  fatigue crack growth behavior and life prediction of tool steel.  - mini symposium (pre-conference) on fracture and strength of solids feofs 2009.  . 

n. ramdhani, j. syarif , z. sajuri and a.r. daud.  (2009).  stability of beta phase in ti-15mass%cr-fe alloy for biomaterials application.  - 4th international conference on recent advances in materials, minerals & environment and 2nd asian on matreials & processing.  . 

t.n.rohmannudin, j. syarif, m.z. omar, z. sajuri and a.r. daud.  (2009).  effect of sintering on alloying behavior and microstructural change of ti-10at.%mo-10at.%cr alloy..  - 4th international conference on recent advances in materials, minerals & environment 2009 and 2nd asian symposium on materials and processing 2009..  . 

j. syarif, h. nofriadi, z. sajuri and m.z. omar..  (2009).  effect of substitutional alloying elements on tensile properties of dual phase steels.  - journal of the japan society for heat treatment.  49(2): 450 ? 453.. 

norie a. akeel, z. sajuri, a. k. ariffin.  (2009).  analysis of stresses and fatigue crack initiation life of wheel / rail contact.  - mini symposium (pre-conference) on fracture and strength of solids feofs 2009.  . 

m. abdulrazzaq, a. k. ariffin, s. abdullah and z. sajuri.  (2009).  fatigue crack growth life of thick-walled cylinder with circumferential cracks under different loading.  - proceeding of enginneering mathematics seminar 2009, penerbit ukm.  . 

m.a. m. daud , m. z. omar, j. sharif and z. sajuri.  (2009).  influence of solution treatment and fatigue crack propagation behavior of magnesium alloy.  - 4th international conference on recent advances in materials, minerals & environment 2009 and 2nd asian symposium on materials and processing 2009.penang, malaysia.  . 

t.n.rohmannudin. j.syarif, m.z.omar, z,sajuri & a.r.daud.  (2009).  changes in phase stability on ti-10at.% mo alloy by alloying elements.  - international journal of mechanical and materials engineering.  4(2):172-175. 

z. zulkoffli, j.syarif and z. sajuri.  (2009).  microstructure and mechanical properties of magnesium matrix composites obtained by hot compaction technique.  - 4th international conference on recent advances in materials, minerals & environment and 2nd asian on matreials & processing.  . 

m. a. m. daud , m. z. omar, j. sharif and z. sajuri.  (2009).  effect of solution treatment on fatigue properties of magnesium alloy.  - international journal of mechanical and materials engineering (ijmme).  4(2):204-207. 

h. nofriady, j. syarif, m. z. omar and z. sajuri.  (2009).  influence of cu on strength and elongation of dual phase steel.  - international journal of mechanical and materials engineering (ijmme).  Vol. 4(2): 1-3. 

s. h. salleh, m. z. omar, j. syarif, m. j. ghazali, s. abdullah and z. sajuri.  (2009).  investigation of microstructures and properties of 440c martensitic stainless steel.  - international journal of mechanical and materials engineering.  49(2):21-24. 

z. zulkoffli, j. syarif and z. sajuri.  (2009).  fabrication of az61/sic composites by powder metallurgy process.  - international journal of mechanical and materials engineering (ijmme).  4(2):156-159. 

a. r. said, j. syarif and z. sajuri.  (2009).  haz characterization of gtd-111 nickel based superalloy welding.  - international journal of materials engineering and technology.  2(2):133-139. 

syarif j., zulhanif, abd salam m.a, and sajuri z..  (2008).  change in microstructure and hardness of ti-6%al-4%v eli alloy on tempering process.  - proceedings of the 13th int. amme conference, egypt.  . 

j. syarif, t.n. rohmannudin, m.z. omar, z. sajuri a.r. daud.  (2008).  study on formation of beta single phase of a ti-10at%mo-10at%cr alloy on sintering and solution treatment.  - proceedings of the 1st wseas international conference on materials science.  . 

m.z. omar, a. alfan, j. syarif, z. sajuri, s. abdullah, m.j. ghazali.  (2008).  modelling of xw-42 steel for semi-solid processing.  - computers and simulation in modern science.  2:39-44. 

m.z. omar, a. alfan, j. syarif, s. abdullah, m.j. ghazali and z. sajuri.  (2008).  modelling of steels in semi solid zones prior to thixoforming process.  - indonesian nanoletter.  2(3):41-48. 

z. zulkoffli, j. syarif, z. sajuri.  (2008).  fabrication of az61/sic composites by powder metallurgy process.  - proceeding of malaysian metallurgical conference 2008, universiti kebangsaan malaysia, bangi.  . 

z.sajuri, j. syarif, m.a.aziman, and a.w.ikhsan.  (2008).  bending fatigue properties of railway track material.  - proceeding of malaysian metallurgical conference 2008, universiti kebangsaan malaysia, bangi.  . 

z. sajuri, j. syarif, m. z. omar, m. m. allafi and m.f. sudar.  (2008).  fatigue and fatigue crack growth behavior of tool steel.  - 1st international conference on materials science (materials`08), bucharest, romania.  . 

roslinda shamsudin, zainuddin sajuri, syarif junaidi syarifuddin djalil, mariyam jameelah ghazali, muhammad azmi abdul hamid, fathul karim sahrani, mohd zaidi omar, shahrum abdullah, azman jalar.  (2008).  the proceeding of malaysian metallurgical conference 2008.  - the proceeding of malaysian metallurgical conference 2008.  . 

m.a. m. daud , m. z. omar, j. sharif and z. sajuri.  (2008).  effect of solution treatment on fatigue properties of magnesium alloy.  - proceeding of malaysian metallurgical conference 2008, universiti kebangsaan malaysia, bangi.  . 

mutoh y., bhuiyan md.s., sajuri z..  (2008).  high cycle fatigue behavior of magnesium alloys under corrosive environment.  - key engineering materials.  378-379:131-146. 

a.r. said, j. syarif and z. sajuri.  (2008).  microstructural study of haz of tig welded gtd 111 nickel based superalloy.  - proceeding of malaysian metallurgical conference 2008, universiti kebangsaan malaysia.  . 

a.r.said, j.syarif, and z.sajuri.  (2008).  haz characterization of gtd-111 nickel based superalloy welding.  - engineering postgraduate conference 2008, universiti kebangsaan malaysia, bangi.  . 

z. zulkoffli, j.syarif and z. sajuri.  (2008).  fabrication of az61 magnesium alloy from a prealloyed.  - engineering postgraduate conference 2008, universiti kebangsaan malaysia, bangi.  . 

z.sajuri, m.a.aziman and a.w.ikhsan.  (2008).  cracking of railway track in klang valley.  - engineering postgraduate conference 2008, universiti kebangsaan malaysia.  . 

zainuddin sajuri, yukio miyashita, yasunobu hosokai & yoshiharu mutoh.  (2007).  effect of loading frequency on fatigue behavior of extruded az61 magnesium alloy.  - jurnal mekanikal.  22: 115-131. 

zainuddin bin sajuri, yukio miyashita, yasunobu hosokai, yoshiharu mutoh.  (2006).  effects of mn content and texture on fatigue properties of as-cast and extruded az61 magnesium alloys.  - international journal of mechanical sciences.  48: 198-209. 

sabrina alam khan, yukio miyashita, yoshiharu mutoh, zainuddin bin sajuri.  (2006).  influence of mn content on mechanical properties and fatigue behavior of extruded mg alloys.  - materials science and engineering a.  A 420: 315-321. 

muhammad fauzi mohd zain, syarif junaidi sjarifuddin. djalil, nasharuddin zainal, yushaizad yusof, mardina abdullah dan zainuddin sajuri.  (2005).  pendekatan dari sistem pembelajaran universitiuniversiti di jepun ke arah kecemerlangan pelajarpelajar fakulti kejuruteraan ukm-.  - seminar pengajaran & pembelajaran 2005.  .