peer mohamed abdul, salma samidin, tiang ming foong.  (2026).  additive manufacturing: polymer composite.  - .  465 - 474. 

intan liyana ramli, farhana mohd foudzi, abu bakar sulong, nabilah afiqah mohd radzuan, wei yin, zainuddin sajuri, m. furjan, shahrul irwan musa.  (2026).  selective laser melting of niti shape memory alloys: a systematic literature review on microstructure, mechanical properties, and processing parameter optimisation.  - international journal of precision engineering and manufacturing.  2625 - 2654. 

farhana mohd foudzi, intan liyana ramli, nur affiqah dania sazali, wei yin, abu bakar sulong, nabilah afiqah mohd radzuan, zainudin sajuri & mohannad salleh hammadi al-furjan.  (2026).  powder characterization of shape memory alloy (sma) nickel-titanium (niti) and numerical simulation of selective laser melting (slm) processing parameters.  - jurnal kejuruteraan.  1499 - 1510. 

gautheman kurup, muhammad fadzlee firas bin mohd fadzillah, nishata royan rajendran royan, nabilah afiqah mohd radzuan, abu bakar sulong, farrahshaida mohd salleh.  (2026).  synergistic effects of maleic anhydride and epoxidized palm oil on pla/tapioca starch biocomposites.  - advances in polymer technology.  1 - 12. 

nabilah afiqah mohd radzuan.  (2026).  3d-printed polylactic acid reinforced carbon fiber in bulk and triply periodic minimal surface (tpms) lattice structures: a mechanical properties comparative study.  - materials and technology.  1 - 7. 

nurul syazwani sahari; nisa naima khalid; nabilah afiqah mohd radzuan; abu bakar sulong.  (2026).  rheology properties in composite filament making.  - aip conf. proc..  1 - 8. 

izzat bin mat samudin, muhammad adam johan bin muhammad affindy, quanjin ma, nabilah afiqah binti mohd radzuan.  (2026).  mechanical performance and deformation mechanisms of additively manufactured lattice structures under quasi-static compression and finite element analysis.  - journal of polymer materials.  1 - 20. 

ahmad alshwawra, ali fayoumi, mohammad hani alomari, nabilah afiqah mohd radzuan.  (2026).  symmetry-driven mechanical response and fracture behavior of fdm-printed pla lw structures: a factorial study of infill topology, print temperature, and flow rate with macrographic fractographic validation.  - journal of composites science.  1 - 32. 

lipan deng, izzat bin mat samudin, quanjin ma, nabilah afiqah mohd radzuan.  (2026).  mechanical performance of fdm-printed pla and tpu lattices with bcc and diamond topologies under quasi-static compression.  - 9th international conference on advances in mechanical engineering (icame2026).  1 - 197. 

nabilah afiqah mohd radzuan.  (2025).  3d-printed polylactic acid reinforced carbon fibre in bulk and triply periodic minimal surfaces (tpms) lattice structure: a mechanical properties analysis comparative study.  - 30. mednarodna konferenca o materialih in tehnologijah / 30th international conference on materials and technology.  1 - 129. 

gautheman kurup, muhammad fadzlee firas bin mohd fadzillah, nishata royan rajendran royan, nabilah afiqah mohd radzuan, abu bakar sulong.  (2025).  impact of processing parameters on the compatibility and performance of pla/tapioca starch biocomposites for short-term food packaging applications.  - materials today communications.  1 - 11. 

quanjin ma, nor hazwani mohd yusof, santosh kumar sahu, yiheng song, nabilah afiqah mohd radzuan, bo sun, ahmad yunus nasution, alagesan praveen kumar and mohd ruzaimi mat rejab.  (2025).  bio-inspired thin-walled straight and tapered tubes with variable designs subjected to multiple impact angles for building constructions.  - buildings.  1 - 29. 

zalina ya, abu bakar sulong, nabilah afiqah mohd radzuan & izdihar tharazi.  (2025).  mechanical properties of kenaf fiber and nano-clay on poly (lactic) acid (pla) composites: a review.  - jurnal kejuruteraan.  695 - 719. 

muhammad fadzlee firas mohd fadzillah, gautheman kurup, nishata royan rajendran royan, nabilah afiqah mohd radzuan, nur hasalli ibrahim & how heoy geok.  (2025).  surface modification strategies for improved performance of pla-tapioca starch bio-composites: a comparative study.  - jurnal kejuruteraan.  883 - 894. 

izzat mat samudin, nabilah afiqah mohd radzuan, abu bakar sulong, quanjin ma, abdul hadi azman, wan fathul hakim wan zamri .  (2025).  stress strain curve analysis of sheet based tpms structures in quasi static compression test: a review.  - journal of materials research and technology.  5757 - 5796. 

farhana mohd foudzi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, nashrah hani jamadon, minhalina ahmad buhairi & kim seah tan.  (2025).  feasibility of multi-material additive manufacturing (mmam) with laser powder bed fusion (lpbf): a brief review.  - lecture notes in mechanical engineering.  265 - 269. 

farhana mohd foudzi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, nashrah hani jamadon & minhalina ahmad buhairi.  (2025).  4d printing of shape memory alloy with selective laser melting (slm): a brief review.  - lecture notes in mechanical engineering.  241 - 246. 

nabilah afiqah mohd radzuan, farhana mohd foudzi, abu bakar sulong, and m furjan.  (2025).  comprehending the effect of printing orientation on the mechanical performance of polyamide-reinforced carbon fibre composites.  - composites and advanced materials.  1 - 9. 

m. r. mazlan, n. h. jamadon, a. b. sulong, f. i. jamhari, m. a. aripin, n. a. m. radzuan, f. yusof.  (2025).  influence of laser power and scanning speed on necking growth of ss316l powder in laser melting processes.  - journal of mechanical engineering and sciences.  10676 - 10684. 

nabilah afiqah mohd radzuan, izzat mat samudin, mohammad reza vaziri sereshk, quanjin ma, abu bakar sulong, farhana mohd foudzi, and nishata royan rajendran royan.  (2025).  a comprehensive approach for the production of carbon fibre-reinforced polylactic acid filaments with enhanced wear and mechanical behaviour.  - e-polymers.  1 - 16. 

nabilah afiqah mohd radzuan, izzat mat samudin, msh al-furjan, abu bakar sulong, farhana mohd foudzi, muhammad amin azman.  (2025).  thermal and mechanical properties of in-house-manufactured pla and pa filaments at high temperature.  - materials and technology.  611 - 620. 

farhana mohd foudzi, minhalina ahmad buhairi, fathin iliana jamhari, norhamidi muhamad, intan fadhlina mohamed, abu bakar sulong, nashrah hani jamadon & nabilah afiqah mohd radzuan.  (2025).  microstructural evolution and performance of heat-treated ti6al4v in laser powder bed fusion.  - sains malaysiana.  2045 - 2057. 

iesti hajar hanapi, siti kartom kamarudin, azran mohd zainoodin, mohd shahbudin masdar, siti radiah mohd kamarudin, nabilah afiqah mohd radzuan, mahnoush beygisangchin, zulfirdaus zakaria.  (2025).  electrical conductivity enhancement of chopped carbon fiber-reinforced epoxy composite bipolar plate for proton exchange membrane fuel cells.  - applied polymer science.  1 - 18. 

nabilah afiqah mohd radzuan, sashwin raj kathirasan, abu bakar sulong.  (2025).  carbon fiber addition effects on the mechanical properties of printed polymeric composite.  - proceedings of the 4th south east asia-japan conference on composite materials.  1 - 12. 

nisa naima khalid, nabilah afiqah mohd radzuan, farhana mohd foudzi, abu bakar sulong, nurul najwa abd rahman.  (2024).  interfacial bonding of polyamide-reinforced carbon fibre via additive manufacturing.  - materiali in tehnologije.  587 - 595. 

al basir, abu bakar sulong, norhamidi muhamad, afifah z. juri, nashrah hani jamadon , farhana mohd foudzi , nabilah afiqah mohd radzuan, kambiz rashidi.  (2024).  influence of ss316l nanoparticles on the sintered properties of two-component micro-powder injection moulded bimodal ss316l/zirconia bi-materials.  - materials.  1 - 22. 

n. f. b. w. anuar, m. z. omar, m. s. salleh, s. h. yahaya, s. al-zubaidi.  (2024).  investigation of t6 heat treatment on dry sliding wear behaviour of thixoformed a356 composite reinforced with graphene.  - journal of advanced manufacturing technology (jamt).  45 - 60. 

aziz a.m., omar m.z., samat s., mohamed i.f., sajuri z., baghdadi a.h..  (2024).  microstructural and tensile behavior of a thixoformed al–si–cu–mg given t5 and t6 heat treatments tested at room and elevated temperatures.  - international journal of metalcasting.  2343 - 2356. 

salah al-zubaidi, jaharah a. ghani, muhsin jaber jweeg, m. n. mohammed, oday i. abdullah.  (2024).  sustainability and green solutions in machining technology: a review.  - journal of environmental protection and ecology.  1522 - 1534. 

j. a. ghani, n. saibani, muhsin j. jweeg, m. n. mohammed, s. al-zubaidi, oday i. abdullah.  (2024).  a comprehensive analysis of the successful strategic planning implemented in automotive industries.  - journal of the balkan tribological association.  851 - 862. 

abid fariduddin mohd fauzi, zaliha wahid, nabilah afiqah mohd radzuan, nurhasyimah abd aziz, afifah zakiyyah juri & abu bakar sulong.  (2024).  a study on mechanical performance of 3d printed wood mimic materials.  - jurnal kejuruteraan.  2571 - 2577. 

izzat mat samudin, nabilah afiqah mohd radzuan, abu bakar sulong, abdul hadi azman, wan fathul hakim wan zamri, nishata royan rajendran royan.  (2024).  advancements in 3d printed carbon fiber reinforced polylactic acid (cfr-pla) lattice structures: a short review.  - 5th eures engineering research symposium.  . 

zaliha wahid, wan fathul hakim wan zamri, nabilah afiqah mohd radzuan, mohd khairol anuar mohd ariffin.  (2024).  study on the effect of printing orientation on tribological behavior of multi jet 3d printed polymers.  - malaysian international tribology conference 2024.  . 

nurhasyimah abd aziz, zaliha wahid, nabilah afiqah mohd radzuan, nashrah hani jamadon, nor kamaliana khamis, afifah zakiyyah juri.  (2024).  fuzzy-based assessment techniques for assessing students’ use of genai tools.  - iucel x knovasi 2024.  . 

mohd hadri hafiz mokhtar, roslena md zaini, nor syeeda abd alim et.al.  (2024).  academic expertise directory faculty of engineering and built environment.  - .  . 

al basir, abu bakar sulong, norhamidi muhamad, afifah z. juri, nashrah hani jamadon, farhana mohd foudzi, nabilah afiqah mohd radzuan.  (2024).  debinding of yttria stabilised zirconia bimodal stainless steel 316l bi materials produced through two component micro powder injection moulding.  - polymers.  1 - 21. 

farhana mohd foudzi, lai yu hung, fathin iliana jamhari, minhalina ahmad buhairi, abu bakar sulong, norhamidi muhamad, nabilah afiqah mohd radzuan, izhar aziz, kim seah tan.  (2024).  physical and hardness performance at different surfaces for titanium alloy (ti6al4v) printed using selective laser melting process (slm).  - jurnal kejuruteraan.  1217 - 1226. 

farhana mohd foudzi, moey kah min, fathin iliana jamhari, minhalina ahmad buhairi, abu bakar sulong, norhamidi muhamad, nabilah afiqah mohd radzuan, izhar aziz, kim seah tan.  (2024).  kesan tanpa masa pegangan rawatan haba ke atas sifat mekanikal dan mikrostruktur pembuatan aditif aloi titanium (ti6al4v) melalui proses peleburan laser selektif (slm).  - jurnal kejuruteraan.  1207 - 1215. 

fathin iliana jamhari, farhana mohd foudzi, minhalina ahmad buhairi, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, and kim seah tan.  (2024).  surface topography and density of ti6al4v via lpbf after heat treatment.  - proceedings of the 9th international conference and exhibition on sustainable energy and advanced materials ice-seam 2023, putrajaya, malaysia.  569 - 573. 

minhalina ahmad buhairi, farhana mohd foudzi, fathin iliana jamhari, nabilah afiqah mohd radzuan, abu bakar sulong, and kim seah tan.  (2024).  enhancing quality assurance through density and surface roughness analysis of 3d-printed ti6al4v parts based on volumetric energy density mechanism.  - proceedings of the 9th international conference and exhibition on sustainable energy and advanced materials, ice-seam 2023, putrajaya, malaysia.  575 - 578. 

nabilah afiqah mohd radzuan, farhana mohd foudzi, abu bakar sulong, m. s. h. al-furjan, nishata royan rajendran royan.  (2024).  quick insight into the dynamic dimensions of 4d printing in polymeric composite mechanics.  - reviews on advanced materials science.  1-12. 

nuraina balqis binti zainal and nabilah afiqah binti mohd radzuan.  (2024).  influence of layer thickness of 3d printed polyamide against temperature.  - advanced engineering materials and composites: properties, fabrication, and applications.  1-10. 

norhamidi bin muhamad;che hassan bin che haron;abu bakar bin sulong;nashrah hani binti jamadon;farhana binti mohd foudzi;nabilah afiqah binti mohd radzuan.  (2024).  investigation of sintering mechanism of yttria-stabilized zirconia and hydroxyapatite bi-material micro-components produced by two-component micro-powder injection moulding.  - .  . 

nabilah afiqah binti mohd radzuan;norhamidi bin muhamad;abu bakar bin sulong;zaliha binti wahid;farhana binti mohd foudzi.  (2024).  mechanism of anticipating diffusion and delamination on fibre oriented additive manufactured polyamide/carbon fibre composite filament.  - .  . 

kwek kian sheng, nabilah afiqah mohd radzuan, farhana mohd foudzi, abu bakar sulong, zaliha wahida.  (2024).  mechanical properties of polyamide material using fdm method.  - south east asia-japan conference on composite materials 2024.  209 - 211. 

nabilah afiqah mohd radzuan,, nuraina balqis binti zainal, farhana mohd foudzi, abu bakar sulong& zaliha wahid.  (2024).  influence of layer thickness of 3d printed polyamide against temperature.  - jurnal kejuruteraan.  1575 - 1584. 

iesti hajar hanapi , siti kartom kamarudin, mahnoush beygisangchin, azran mohd zainoodin , mohd shahbudin masdar, siti radiah mohd kamarudin, nabila afiqah mohd radzuan, zulfirdaus zakaria.  (2024).  review of recent composite bipolar plate in system development.  - journal of environmental chemical engineering.  1 - 24. 

kwek kian sheng, nabilah afiqah mohd radzuan, farhana mohd foudzi, abu bakar sulong, zaliha wahida.  (2024).  sifat mekanik bahan poliamida menggunakan kaedah permodelan pemendapan bersatu.  - jurnal kejuruteraan.  1989 - 1999. 

minhalina ahmad buhairi, farhana mohd foudzi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, abdul hadi azman, wan sharuzi wan harun, msh al-furjan.  (2023).  review on volumetric energy density: influence on morphology and mechanical properties of ti6al4v manufactured via laser powder bed fusion.  - progress in additive manufacturing.  265-283. 

nisa naima khalida, nabilah afiqah radzuana,b*, abu bakar sulonga,b, farhana mohd foudzia & ariffuddin hasrana.  (2023).  rheological test of flowability and diffusion behavior of carbon fibre reinforced polyamide.  - jurnal kejuruteraan.  215-222. 

nisa naima khalid, fatin zahidah awang adi, nabilah afiqah mohd radzuan & abu bakar sulong.  (2023).  shear test characterization of 3d printed polyamide reinforced carbon fiber composites.  - jurnal kejuruteraan.  431-436. 

fathin iliana jamhari, farhana mohd foudzi, minhalina ahmad buhairi, norhamidi muhamad, intan fadhlina mohamed, abu bakar sulong, nabilah afiqah mohd radzuan.  (2023).  impact of hot isostatic pressing on surface quality, porosity and performance of ti6al4v manufactured by laser powder bed fusion: a brief review.  - jurnal tribologi.  1-15. 

nabilah afiqah mohd radzuan, nisa naima khalid, farhana mohd foudzi, nishata royan rajendran royan and abu bakar sulong.  (2023).  mechanical analysis of 3d printed polyamide composites under different filler loadings.  - polymers.  1-11. 

fathin iliana jamhari. farhana mohd foudzi, minhalina ahmad buhairi, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, nashrah hani jamadon, kim seah tan.  (2023).  influence of heat treatment parameters on microstructure and mechanical performance of titanium alloy in lpbf: a brief review.  - journal of materials research & technology.  4091-4110. 

abu bakar bin sulong;rosiah binti rohani;farhana binti mohd foudzi;nabilah afiqah binti mohd radzuan.  (2023).  radiation-induced grafting of electrospun nanofiber based functionalized natural rubber for membrane application.  - .  . 

nabilah afiqah binti mohd radzuan;norhamidi bin muhamad;abu bakar bin sulong;farhana binti mohd foudzi.  (2023).  bonding of polyamide reinforced carbon fibre via additive manufacturing.  - .  . 

abu bakar bin sulong;norhamidi bin muhamad;mohd. zaidi bin omar;zainuddin bin sajuri;nabilah afiqah binti mohd radzuan;mohd ikram bin ramli.  (2023).  mechanism in processability of copper-aluminium-manganese shape memory alloys (smas) through powder injection moulding (pim).  - .  . 

nurul syazwani sahari, nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, nishata royan a/p rajendran royan.  (2023).  rheology properties in composite filament making.  - 8th international conference on fuel cell & hydrogen technology 3rd symposium on fuel cell and hydrogen technology 2023 (icfcht sfcht 2023).  05. 

norazyan rudi hartono, nabilah afiqah mohd radzuan, abu bakar sulong.  (2023).  carbon fibre reinforced polyamides in high-temperature via 3d printing.  - malaysia polymer international conference 2023.  20. 

al basir, norhamidi muhamad, abu bakar sulong, muhammad bin mohamed amin, nashrah hani jamadon, nabilah afiqah mohd radzuan.  (2023).  micro-injection molding and debinding behavior of hydroxyapatite/zirconia bi-materials fabricated by two-component micro powder injection molding process.  - materials.  1-18. 

norazyan rudi hartono, nabilah afiqah mohd radzuan, nisa naima khalid, abu bakar sulong,.  (2023).  3d printed carbon fibre reinforced polyamides in high temperature.  - jurnal kejuruteraan.  1351-1361. 

nurul syazwani sahari, nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong.  (2023).  rheology properties in polyamide reinforced carbon fibre composite.  - international conferences on powder metallurgy and advanced processes & systems in manufacturing (pm7 & apsim2023).  1-3. 

zaliha wahid, nabilah afiqah mohd radzuan, nurhasyimah abd aziz, afifah zakiyyah juri , abu bakar sulong.  (2023).  on mechanical performance of 3d printed wood mimic materials.  - 7th powder metallurgy and advanced processes & systems in manufacturing 2023 (pm7&apsim2023).  1-9. 

nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad.  (2022).  layup sequence and interfacial bonding of additively manufactured polymeric composite.  - 6th postgraduate colloquium for environmental research 2022 (pocer 2022).  16-17. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi.  (2022).  prestasi bahan polimer komposit dicetak menggunakan pemodelan pemendapan bersatu: suatu ulasan ringkas.  - sains malaysiana.  1545-1556. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mohd zamzuri ahmad shukri.  (2022).  reinforced composite as a feeder for 3d printing application.  - jurnal kejuruteraan.  671-678. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mihirssen gunasegran.  (2022).  simulation analysis of graphene addition on polymeric composite.  - jurnal kejuruteraan.  941-947. 

i gusti ayu arwati, edy herianto majlan, loh kee shyuan, khuzaimah ariffin , teuku husaini,sagir alva, wahyu muhammad, nabilah afiqah mohd radzuan.  (2022).  effect of chitosan on the corrosion inhibition for aluminum alloy in h2so4 medium.  - 23rd world hydrogen energy conference.  149-150. 

n.n. khalid, n.a.m. radzuan,a.b. sulong, f.m. foudzi.  (2022).  adhesion behaviour of 3d printed polymer composites.  - composite sciences and technology international conference 2022 (comsat2022).  4-5. 

nabilah afiqah mohd radzuan, fatin zahidah awang adi, abu bakar sulong, nisa naima khalid.  (2022).  shear test of 3d printed polymer composites.  - 31st regional conference on solid state science and technology (rcssst2022).  1. 

nurul akidah baharuddin et al. (rujuk salinan kertas untuk senarai lengkap penulis).  (2022).  fuel cell system - stationary backup power solution for telecommunication sites.  - .  1-35. 

mohd shahbudin mastar @ masdar et al. (rujuk salinan kertas untuk senarai lengkap penulis).  (2022).  fuel cell system - general operational and safety requirements.  - .  1-32. 

nabilah afiqah mohd radzuan.  (2022).  how to write a good executive summary.  - .  1-10. 

nabilah afiqah mohd radzuan.  (2022).  how to write a good literature review.  - .  1-10. 

nabilah afiqah mohd radzuan, nurul syazwani sahari, nisa naima khalid, abu bakar sulong.  (2022).  rheology properties in composite filament making.  - international seminar on engineering science and technology international conference (estic) 2022.  1. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, david hui.  (2022).  adhesion behaviour of 3d printed polyamide carbon fibre composite filament.  - reviews on advanced materials science.  838-848. 

gusti ayu arwati, edy herianto majlan, loh kee shyuan, khuzaimah ariffin , teuku husaini, sagir alva, wahyu muhammad, nabilah afiqah mohd radzuan.  (2022).  effect of chitosan on the corrosion inhibition for aluminium alloy.  - 23rd world hydrogen energy conference.  128-129. 

nabilah afiqah mohd radzuan, mohd zamzuri ahmad shukri, nisa naima khalid.  (2021).  reinforced kenaf composite as a feeder for 3d printing application.  - international conference on manufacturing engineering technology (iconmet).  96. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi.  (2021).  conductive polymer composites using 3d printing for electronic devices: a review.  - international conference on manufacturing engineering technology (iconmet).  94. 

nabilah afiqah mohd radzuan, abu bakar sulong, iswandi.  (2021).  effect of multi-sized graphite filler on the mechanical properties and electrical conductivity.  - sains malaysiana.  2025-2034. 

nabilah afiqah mohd radzuan*, abu bakar sulong.  (2021).  adhesion behavior of 3d printed polyamide-carbon fibre composites filament.  - symposium on fuel cell and hydrogen technology 2021 (sfcht2021).  71. 

farhana mohd foudzi, minhalina ahmad buhairi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, wan sharuzi wan harun, mohannad saleh hammadi al-furjan.  (2021).  effect of energy density on properties of additive manufactured ti6al4v via slm.  - international conference on powder metallurgy and particulate materials (powdermet2021).  434-448. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong and mohammad ashraf mohammad amin.  (2021).  3d printed polyamide-carbon fibre composites filament.  - 8th international conference on solid state science and technology (8th icssst 2021).  117. 

nabilah afiqah mohd. radzuan, abu bakar sulong, mohd. yusuf zakaria.  (2021).  komposit polimer pengalir revolusi teknologi pembuatan.  - .  218. 

nabilah afiqah mohd radzuan, abu bakar sulong, anil verma, and norhamidi muhamad.  (2021).  layup sequence and interfacial bonding of additively manufactured polymeric composite: a brief review.  - nanotechnology reviews.  1-20. 

nabilah afiqah mohd radzuan, mihirssen gunasegran and nisa naima khalid.  (2021).  the effect of graphene addition on the youngs modulus and tensile strength of kenaf fibre composites.  - iop conf. series: materials science and engineering.  1-8. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong and farhana mohd foudzi.  (2021).  a review on bonding of polyamide reinforced carbon fibre via additive manufacturing.  - iop conf. series: materials science and engineering.  1-6. 

nabilah afiqah mohd radzuan, mohammad afiq rashid, dulina tholibon, abu bakar sulong and che hassan che haron.  (2021).  kenaf reinforced polypropylene composites: a numerical simulation.  - aip conference proceedings / 4th international sciences, technology & engineering conference (istec) 2020.  1-9. 

mohd khairul fadzly md radzi, norhamidi muhamad, abu bakar sulong, nabilah afiqah mohd radzuan, mohd ramdhan mohd khalid, mohd rizal ahmad, mohd ikmal hafizi azaman, ahmad syazwan ramli, mohd azwan mohd bakri.  (2021).  problems and constraints involved in the injection moulding process of biocomposites: a review.  - advances in agricultural and food research journal.  1-14. 

nur farhani ismail, nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2021).  the effect of alkali treatment on physical, mechanical and thermal properties of kenaf fiber and polymer epoxy composites.  - polymers.  1-17. 

abu bakar bin sulong;che hassan bin che haron;norhamidi bin muhamad;nabilah afiqah binti mohd radzuan.  (2021).  kesan penambahan bahan nano terhadap ketahanan mekanikal dan fizikal kenaf polimer komposit bagi aplikasi automotif.  - .  . 

bee huah lim, edy herianto majlan, ahmad tajuddin, teuku husaini, wan ramli wan daud, nabilah afiqah mohd radzuan, md. ahsanul haque.  (2021).  comparison of catalyst-coated membranes and catalyst-coated substratefor pemfc membrane electrode assembly: a review.  - chinese journal of chemical engineering.  1-16. 

i gusti ayu arwati, edy herianto majlan, lo kee shyuan, teuku husaini, sagir alva, muhajirin, nabilah afiqah mohd radzuan.  (2020).  the influence of temperature and electroforesis deposition green inhibitor on bipolar plate aa5052 in sulfuric acid medium.  - sains malaysiana.  3169-3177. 

nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mohd yusuf zakaria and mohd ikram ramli.  (2020).  study on the influence mechanism of sintering hydroxyapatite (ha).  - journal of ceramic processing research.  662-666. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2020).  effects of high-temperature exposure on the mechanical properties of kenaf composites.  - polymers.  1-13. 

nabilah afiqah mohd radzuan, mohammad afiq rashid, dulina tholibo, abu bakar sulong, che hassan che haron.  (2020).  numerical simulation analysis of kenaf reinforced polypropylene composites.  - international science, technology and engineering conference, (istec 2020).  15-17. 

derrick cheah seet leong, nabilah afiqah mohd radzuan, abu bakar sulong.  (2020).  effect of carbon nanotubes addition on the mechanical properties of kenaf/carbon nanotube/polypropylene composite.  - proceedings of the 4th international symposium on advanced materials and nanotechnology 2020.  259-264. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad, che hassan che haron.  (2020).  new processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts.  - composites part b: engineering.  1-7. 

farah atiqah abdul azam, nishata royan rajendran royan, nor yuliana yuhana, nabilah afiqah mohd radzuan, sahrim ahmad and abu bakar sulong.  (2020).  fabrication of porous recycled hdpe biocomposites foam: effect of rice husk filler contents and surface treatments on the mechanical properties.  - polymers.  1-14. 

rosli, r.e., sulong, a.b., daud, w.r.w., zulkifley, m.a., rosli, m.i., majlan, e.h., haque, m.a. & radzuan n.a.m..  (2019).  the design and development of an ht-pemfc test cell and test station.  - international journal of hydrogen energy.  30763-30771. 

nabilah afiqah mohd radzuan , abu bakar sulong, david hui and anil verma.  (2019).  electrical conductivity performance of predicted modified fibre contact model for multi-filler polymer composite.  - polymers.  1-12. 

nabilah afiqah mohd radzuan, nur farhani ismail, mohd khairul fadzly md radzi, zakaria bin razak, izdihar binti tharizi, abu bakar sulong, che hassan che haron, norhamidi muhamad.  (2019).  kenaf composites for automotive components: enhancement in machinability and moldability.  - polymers.  1-10. 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu, ahmad tajuddin abdullah, teuku husaini, ros emilia rosli, edy herianto majlan, masli irwan rosli.  (2019).  fibre orientation effect on polypropylene/milled carbon fiber composites in the presence of carbon nanotubes or graphene as a secondary filler: application on pem fuel cell bipolar plate.  - international journal of hydrogen energy.  30618-30626.