c h chan, m s kasim, r izamshah, h a bakar, s a sundi, k a zakaria, c h c haron, j a ghani and m s a hafiz.  (2017).  analysis of face milling performance on inconel 718 using fem and historical data of rsm.  - iop conf. series: materials science and engineering.  . 

tharazi, i., sulong, a.b., muhamad, n., haron, c.h.c., tholibon, d., ismail., n.f., radzi, m.k.f.m., razak, z..  (2017).  optimization of hot press parametres on tensile strength for undirectional long kenaf fiber reinforced polylactic-acid composites.  - advances in material and processing technologies conference, ampt 2017 (procedia engineering).  . 

harun a., haron c.h.c., ghani j.a., mokhtar s., sanuddin a..  (2016).  fundamental study on delamination in milling kenaf fiber reinforced plastic composite (unidirectional).  - asme 2016 11th international manufacturing science and engineering conference, msec 2016.  1-7. 

izdihar tharazi, abu bakar sulong, norhamidi muhamad, che hassan che haron, dulina tholibon, nur farhani ismail, mohd khairul fadzly md radzi & zakaria razak.  (2016).  tensile properties of unidirectional kenaf fibre reinforced polylactic-acid composites.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

rizal, m., ghani, j.a., nuawi, m.z., haron, c.h.c..  (2016).  a triaxial cutting force measurement utilizing an embedded transducer on a spindle rotating tool.  - 9th international conference on sensing technology, icst 2015; auckland; new zealand.  289-294. 

said m.s., ghani j.a., selamat m.a., wan n.n., hassan c.c.h..  (2016).  optimisation of end milling machining parameters using the taguchi method and anova of alsi/aln metal matrix composite material.  - key engineering materials.  200-204. 

musfirah abdul hadi, jaharah a. ghani, c.h. che haron, natasha a. raof.  (2014).  tribological characterization of the cutting zone in milling nickel based alloy.  - world virtual conference on advanced research in mechanical and materials engineering location: kuala lumpur, malaysia.  12-16. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, and che hassan che haron1,.  (2014).  i-kaztm-based analysis of cutting force signals for tool condition.  - applied mechanics and materials / trans tech publications, switzerland.  . 

natasha a. raof , jaharah a. ghani, junaidi syarif, che hassan che haron, musfirah abdul hadi.  (2014).  comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning aisi 4340 alloy steel.  - world virtual conference on advanced research in mechanical and materials engineering location: kuala lumpur, malaysia.  7-11. 

s.h. tomadi, j.a. ghani, c.h. che haron, a.r. daud.  (2014).  optimization of cutting parameters for end milling alsi/aln metal matrix composite using the taguchi method.  - materials science forum (15th international conference on advances in materials and processing technologies, ampt 2012).  . 

m.s.said, j.a.ghani, che hassan c.h, shahrizan yusoff, m.a. selamat, r.othman.  (2014).  tool wear and surface roughness when machining alsi /aln metal matrix composite using uncoated carbide cutting tool.  - materials science forum (15th international conference on advances in materials and processing technologies, ampt 2012).  . 

m.s.said, m.s.yusoff, che hassan c.h, m.a. selamat,j.a. shukur, j.a.ghani.  (2014).  tool wear in machining alsi/alnmetal matrix composite 10 wt% reinforcement using uncoated cutting tool.  - applied mechanics and materials / trans tech publications, switzerland.  . 

m. a. hadi, j.a. ghani, c.h. che haron, m. s. kasim.  (2013).  comparison between up-milling and down-milling operations on tool wear in milling inconel 718.  - procedia engineering - the malaysian international tribology conference 2013 (mitc2013).  . 

muhammad rizala, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2013).  the application of i-kaztm-based method for tool wear monitoring using cutting force signal.  - procedia engineering -the malaysian international tribology conference 2013 (mitc2013).  . 

lashlem, a.a., wahab, d.a., abdullah, s., haron, c.h.c..  (2012).  impact performance of low carbon steel safety beams for car doors.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials).  . 

muhammad ilman hakimi chua, abu bakar sulong, norhamidi muhamad, mohd fazuri abdullah and che hassan che haron.  (2011).  optimization of injection parameters using 16mum stainless steel powder (ss316l) at 63 vol. %, 63.5 vol. % and 64 vol. % powder loading by taguchi method for metal injection molding.  - 8th international conference on composite science and technology, iccst8; kuala lumpur(key engineering materials).  . 

ramli, i.s., arshad, h., sulong, a.b., yahaya, n.h.mohd., che haron, c.h..  (2011).  enhancing learning experience of novice surgeon with virtual training system for jig and fixture usage.  - 2nd international visual informatics conference, ivic 2011; selangor (lecture notes in computer science).  . 

hendri yanda, jaharah a. ghani, che hassan che haron.  (2011).  application of fem in investigating machining performance.  - international conference on advances in materials and processing technologies, ampt 2009; 26 october 2009 through 29 october 2009 (advanced materials research).  . 

jaharah a.ghani, goh gokyeong, and che hassan che haron.  (2011).  surface integrity of aisi h13 in end milling and electrical discharge machining process.  - international conference on advances in materials and processing technologies, ampt 2009 (advanced materials research).  . 

haron, chc; ghani, ja; kasim, ms; soon, tk; gusri, ai; sulaiman, ma.  (2011).  surface integrity of inconel 718 under mql condition.  - 2010 international conference on advances in materials and manufacturing processes, icammp 2010; shenzhen (advanced materials research).  . 

yazid m.z.a., ibrahim g.a., said a.y.m., cheharon c.h., ghani j.a..  (2011).  surface integrity of inconel 718 when finish turning with pvd coated carbide tool under mql.  - 1st cirp conference on surface integrity, csi 2012; bremen (procedia engineering).  . 

burhanuddin, y., haron, c.h.c., ghani, j.a..  (2011).  the effect of tool edge geometry on tool performance and surface integrity in turning ti-6al-4v alloys.  - international conference on advances in materials and processing technologies, ampt 2009 (advanced materials research).  . 

ibrahim g.a., che haron c.h., ghani j.a..  (2011).  evaluation of pvd-inserts performance and surface integrity when turning ti-6al-4v eli under dry machining.  - international conference on advances in materials and processing technologies, ampt 2006 (advanced materials research ).  . 

mohd fazuri abdullah, abu bakar sulong, ilman hakimi chua, che hassan che haron, jaharah a. ghani.  (2010).  effects of insert nose radius and machining parameters on the surface roughness of stainless steel 316l.  - key engineering materials.  . 

jaharah a. ghani, muhammad rizal, mohd zaki nuawi, che hassan che haron, rizauddin ramli.  (2010).  statistical analysis for detection cutting tool wear based on regression model.  - proceedings of the international multiconference of engineers and computer scientists imecs 2010.  . 

mohd nor azmi mohd rodzi, jaharah a.g., eghawail a.m., kamal othman, ab rahman m.n. and che hassan c.h..  (2010).  performance of coated carbide tool in green turning of fcd 700 ductile cast iron.  - proceedings of the international multiconference of engineers and computer scientists 2010, imecs 2010.  . 

gusri akhyar ibrahim, che hassan che haron and jaharah abd ghani.  (2010).  tool wear performance of cvd-insert during machining of ti-6%al-4%v eli at high cutting speed.  - key engineering materials.  . 

g.a. ibrahim, c.h. che haron, j.a. ghani.  (2010).  tool wear mechanism in continuous cutting of difficult-to-cut material under dry machining.  - advanced materials research.  . 

jaharah a. ghani, muhammad rizal, mohd zaki nuawi, che hassan che haron, mariyam jameelah ghazali, and mohd nizam ab rahman.  (2010).  online cutting tool wear monitoring using i-kaz method and new regression model.  - advanced materials research.  . 

jaharah a. ghani, mohd nor azmi mohd rodzi, mohd zaki nuawi,kamal othman, mohd. nizam ab. rahman, che hassan che haron, and baba md deros.  (2010).  application of taguchi method for analyzing factors affecting the performance of coated carbide tool when turning fcd700 in dry cutting condition.  - aip conference proceedings - international conference on advances in materials and processing technologies. vol. 1315.  . 

jaharah a.ghani, mohd nor azmi mohd rodzi, kamal othman and che hassan che haron.  (2010).  tool life and surface roughness of fcd 700 ductile cast iron when dry turning using carbide tool.  - advanced materials research.  . 

intan syaherra ramli, haslina arshad, abu bakar sulong, nor hamdan mohd yahaya, and che hassan che haron.  (2009).  visualization of the newly designed jig and fixture for computer-assisted knee replacement surgery.  - lecture notes in computer science.  .