a.f. fatah, a.a. mohamad, a. muchtar, n.a. hamid.  (2021).  physical characterization of lscf-cuo via enhanced modified sol-gel method for intermediate temperature solid oxide fuel cells (it-sofcs).  - materials today: proceedings.  2052-2057. 

jasmina qamaruzzaman, muhammad hussain ismail, andanastuti muchtar, malek selamat, rohana ahmad.  (2020).  microstructural characterization and microhardness of leucite glassceramics synthesized from sarawak sand reserves.  - iop conference series: materials science and engineering.  1-7. 

wan nor anasuhah wan yusoff, nurul akidah baharuddin*, mahendra rao somalu, andanastuti muchtar, abdullah abdul samat.  (2020).  a short review on selection of electrodes materials for symmetrical solid oxide fuel cell.  - iop conf. series: materials science and engineering.  1-5. 

c k ng, s ramesh, c y tan, a muchtar, m r somalu, w s samuel lew, c h ting, y d chuah and u sutharsini.  (2019).  thermal stability behaviour of scandia stabilised zirconia.  - iop conference series: earth and environmental science.  1-6. 

abdul azim jais, mahendra rao somalu, andanastuti muchtar, wan nor roslam wan isahak.  (2019).  carbon deposition properties of ni0.5m0.5/10sc1cesz (m = cu, co and fe) cermet anode for dry reforming methane-fuelled solid oxide fuel cells.  - iop conference series: earth and environmental science.  1-6. 

wan nor anasuhah wan yusoff, nur wardah norman, abdullah abdul samat, mahendra rao somalu, andanastuti muchtar and nurul akidah baharuddin.  (2019).  performance of lico0.6zn0.4o2 as a potential cathode material candidate for intermediate solid oxide fuel cell application.  - iop conference series: earth and environmental science.  1-6. 

abdullah abdul samat, mahendra rao somalu, andanastuti muchtar, nurul akidah baharuddin and nafisah osman.  (2019).  optimisation of screen-printed la0.6sr0.4coo3-d cathode film for intermediate temperature proton-conducting solid oxide fuel cell application.  - iop conference series: earth and environmental science.  1-6. 

abdullah abdul samat, mahendra rao somalu, andanastuti muchtar and nafisah osman.  (2019).  electrochemical performance of la0.6sr0.4coo3-d cathode in air and wet air for bace0.54zr0.36y0.1o3-based protonconducting solid oxide fuel cell.  - iop conference series: earth and environmental science.  1-6. 

nurul akidah baharuddin, wan nor anasuhah wan yusoff, andanastuti muchtar, mahendra rao somalu, abdullah abdul samat, mustafa anwar.  (2019).  influence of layer numbers on the structural and electrical performance of cobalt-free srfe0.5ti0.5o3-d cathode for ntermediate-temperature solid oxide fuel cell application.  - iop conference series: earth and environmental science.  1-5. 

n w norman, w n a wan yusoff, a a jais, m r somalu and a muchtar.  (2019).  development of sr0.6ba0.4ce0.9pr0.1o3-d electrolyte for proton-conducting solid oxide fuel cell application.  - iop conference series: earth and environmental science.  1-6. 

ahmad zubair yahaya, mahendra rao somalu, andanastuti muchtar, shaharin anwar sulaiman, wan ramli wan daud.  (2019).  characterization of tar formation during high temperature gasification of different chemical compositions in biomass.  - iop conference series: earth and environmental science.  1-6. 

nafisah osman, abdullah abdul samat, wan zuliana wan zulkifli, mahendra rao somalu, andanastuti muchtar, abdul mutalib md jani, oskar hasdinor hassan.  (2019).  sol-gel synthesis of solid solution based on cerate-zirconate ceramics.  - 6th international conference on solid state science and technology, icssst 2017 (solid state phenomena).  29-34. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, seong jin park.  (2019).  processing of stainless steel (ss316l)-hydroxyapatite (ha) powder composite through powder injection molding.  - iop conference series: journal of physics: conference series.  1-6. 

nur lina rashidah rashid, mahendra rao somalu, andanastuti muchtar, wan nor roslam wan isahak.  (2019).  properties of pr and in-doped bazrcey-based electrolyte for proton conducting fuel cell systems.  - iop conference series: earth and environmental science.  1-6. 

siti fairus mohamad, sufizar ahmad, hamimah abdul rahman, andanastuti muchtar.  (2017).  diversification studies on samarium strontium cobaltite regarding thermal & structural properties as based composite cathode of sofc.  - materials science forum.  162-166. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar & mohd yusuf zakaria.  (2016).  powder injection molding of ti6al4v-w composite: rheological properties.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  13-14. 

nurul akidah baharuddin, andanastuti muchtar, mahendra rao somalu, abdullah abdul samat.  (2016).  thermal decomposition of cobalt-free srfe0.9ti0.1o3-d cathode for intermediate temperature solid oxide fuel cell.  - procedia engineering.  72-77. 

lily siong @ mahmud, andanastuti muchtar, mahendra rao somalu.  (2015).  review on anode material development in solid oxide fuel cells.  - aip conference proceedings.  1-5. 

linda agun, muhammad subri abu bakar, sufizar ahmad, andanastuti muchtar and hamimah abd.rahman.  (2015).  influence of ag on the chemical and thermal compatibility of lscfsdcc for lt-sofc.  - applied mechanics and materials, trans tech publications, switzerland.  445-449. 

chin chuin hao, andanastuti muchtar, masfueh razali, che husna azhari.  (2015).  the translucency of yttria-stabilized zirconia in dental crowns: a review.  - applied mechanics and materials, trans tech publications, switzerland.  436-440. 

linda agun, sufizar ahmad, andanastuti muchtar and hamimah abd. rahman.  (2015).  influence of binary carbonate on the physical and chemical properties of composite cathode for low-temperature sofc.  - advanced materials research.  pp 177-181. 

somalu m.r., muchtar a., brandon n.p..  (2015).  understanding the rheology of screen-printing inks for the fabrication of sofc thick films.  - ecs transactions.  1323-1331. 

s. ahmad, m.s.a. bakar, h.a. rahman and a. muchtar.  (2015).  brief review: electrochemical performance of lscf composite cathodes - influence of ceria-electrolyte and metals element.  - applied mechanics and materials.  pp 3-7. 

mohamed m. aboras, andanastuti muchtar, che husna azhari, norziha yahaya.  (2015).  types of failures in porcelain-fused-to-metal dental restoration.  - 6th european conference of the international federation for medical and biological engineering / springer international publishing switzerland.  345-348. 

leong chee huan, andanastuti muchtar, tan chou yong, masfueh razali.  (2014).  a review: effect of sintering method on the decomposition of hydroxyapatite and density of hydroxyapatite zirconia composites.  - applied mechanics and materials, trans tech publications, switzerland.  . 

muhamad subri abu bakar, mohd fadhzullah kamaruddin, sufizar ahmad, hamimah abd rahman, hatijah basri, andanastuti muchtar.  (2014).  effects of calcination factors on the composite cathode powder lscf-sdc carbonate by using dry milling.  - applied mechanics and materials, trans tech publications, switzerland.  . 

hamimah abd. rahman, andanastuti muchtar, norhamidi muhamad, huda abdullah.  (2014).  influence of calcination on the properties of la0.6sr0.4co0.2fe0.8o3-d- samarium doped ceria carbonate.  - applied mechanics and materials, trans tech publications, switzerland.  . 

m.m. aboras, andanastuti muchtar, che husna azhari & norziha yahaya.  (2014).  type of failure of zirconia-based ceramics in dental laboratory in misurata, libya.  - applied mechanics and materials.  . 

chin chuin hao, andanastuti muchtar, noor faeizah amat, mariyam jameelah ghazali, norziha yahaya.  (2014).  influence of sintering temperature on the translucency of sintered zirconia by cold isostatic pressing.  - advanced materials research, trans tech publications, switzerland.  . 

theng kai yuan, andanastuti muchtar, mohamed aboras, norziha yahaya, mariyam jameelah ghazali.  (2014).  properties and survival rate of all ceramics dental crown: a review.  - applied mechanics and materials, 4th mechanical and manufacturing engineering, trans tech publication, switzerland.  . 

linda agun, hamimah abd. rahman, sufizar ahmad, andanastuti muchtar.  (2014).  durability and stability of lscf composite cathode for intermediate-low temperature of solid oxide fuel cell (it-lt sofc) : short review.  - advanced materials research, trans tech publication, swirtzerland.  . 

noor faeizah amat, andanastuti muchtar, norziha yahaya, mariyam jameelah ghazali, chin chuin hao.  (2014).  comparison between slip casting and cold isostatic pressing for the fabrication of nanostructured zirconia.  - advanced materials research, trans tech publications, switzerland.  . 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, and jaharah a. ghani.  (2013).  effects of injection temperature and pressure on green part density for ceramic injection molding.  - advanced materials research.  . 

n.a. baharuddin, a. muchtar, a.b. sulong, h. abdullah.  (2013).  fabrication methods for planar solid oxide fuel cells : a review.  - advanced materials research.  . 

m. r. somalu, a. muchtar, m. g. baboli, v. yufit, i. p. shapiro, p. xiao dan n. p. brandon.  (2013).  understanding the relationship between ink rheology and film properties for screen-printed nickel/scandia-stabilized-zirconia anodes.  - ecs transactions : 13th international symposium on solid oxide fuel cells (sofc-xiii).  . 

andanastuti muchtar, shahrum abdullah, khairul anwar mastor.  (2013).  frequency analysis of personality development in malaysian engineering students influenced by german sojourn.  - procedia social and behavioral sciences -6th international forum on engineering education (ifee 2012).  . 

noor faeizah amat, andanastuti muchtar, norziha yahaya and mariyam jameelah ghazali.  (2013).  effect of sintering temperature on the mechanical properties of nanostructured zirconia fabricated via colloidal processing.  - advanced materials research.  . 

k.f. lim, andanastuti muchtar, rusnah mustaffa dan c. y. tan.  (2013).  sintering of ha/zirconia composite for biomedical and dental applications: a review.  - advanced materials research.  . 

sarizal md ani, andanastuti muchtar, norhamidi muhamad and jaharah a. ghani.  (2013).  optimum powder loading of feedstock based on an alumina-zirconia powder for ceramic injection molding.  - advanced materials research.  . 

c.h leong, k.f lim, andanastuti muchtar and norzihayahaya.  (2013).  decomposition of hydroxyapatite in hydroxyapatite zirconia composites for dental applications.  - advanced materials research / trans tech publications, switzerland.  . 

nurul akidah baharuddin, andanastuti muchtar, abu bakar sulong & huda abdullah.  (2013).  effect of deposition time on lscf-sdc carbonate thin film formation by the electrophoretic deposition method.  - advanced materials research.  . 

noor faeizah amat, andanastuti muchtar, norziha yahaya and mariyam jameelah ghazali.  (2013).  effect of dispersant agent amount in colloidal processing of zirconia dental ceramic.  - advanced materials research.  . 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2013).  rheological properties of zirconia toughened alumina powder for ceramic injection molding.  - advanced materials research.  . 

kok-fong lim, a. muchtar, r. mustaffa and chou-yong tan.  (2013).  preparation of ha-zirconia nanocomposite for dental applications.  - advanced materials research.  . 

nazlinda, a., beh, k.l., azrilah, a. a., andanastuti muchtar, azami zaharim.  (2012).  analysis of the parallel circuit conceptual understanding test (pccut_28) with the engineering students.  - recent researches in engineering education and software engineering : proceedings of the 9th wseas international conference on engineering education (education`12).  . 

mohd najib redzuan lee, nuraini khatimin, andanastuti muchtar, kaseh haji abu bakar & azami zaharim.  (2012).  the investigation of initial personality attribute of the ukm-ude students using rasch model..  - proceedings of 11th wseas international conference on engineering education (education`12), cambridge, uk, 22-27 feb 2012..  . 

mohd huzairi johari, roslena md.zaini, azami zaharim, hassan basri, andanastuti muchtar.  (2012).  mean gap analysis between universiti kebangsaan malaysia engineering graduates and malaysia engineering graduates from the perception and expectation of employers.  - recent researches in engineering education and software engineering : proceedings of the 9th wseas international conference on engineering education (education`12).  . 

andanastuti muchtar, che nurul aini che amri, mohd. marzuki mustafa, kaseh abu bakar.  (2012).  the impact of internationalisation towards student learning with regards to undergraduate engineering students.  - procedia social and behavioral sciences - ukm teaching and learning congress 2011.  . 

mojgan ahmadrezaei, andanastuti muchtar, norhamidi muhamad, c.y.tan.  (2011).  preparation and evaluation of baxsr(x-1)coyfe(y-1)o3delta nanomaterial for sofc cathode by oxalate co-precipitation (x=0.2, y=0.8).  - 2011 1st international conference on mechanical engineering, icme 2011 (applied mechanics and materials); phuket.  . 

jarot raharjo, andanastuti muchtar, wan ramli wan daud,
norhamidi muhamad and edy herianto majlan.  (2011).  porous nio-sdc carbonates composite anode for lt-sofc applications produced by pressureless sintering.  - 2011 1st international conference on mechanical engineering, icme 2011 (applied mechanics and materials); phuket.  . 

miloud souiyah, a. muchtar and a. k. ariffin.  (2011).  on the crack propagation trajectory of central cracked plates under mixed mode loading conditions.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials).  . 

hamimah abd.rahman, andanastuti muchtar, norhamidi muhamad and huda abdullah.  (2011).  fabrication and characterisation of la0.6sr0.4co0.2fe0.8o3-delta-sdc composite cathode.  - 8th international conference on composite science and technology, iccst8; kuala lumpur (key engineering materials).  . 

jarot raharjo, andanastuti muchtar, wan ramli wan daud, norhamidi muhamad and edy herianto majlan.  (2011).  fabrication of porous lscf-sdc carbonates composite cathode for solid oxide fuel cell (sofc) applications.  - 8th international conference on composite science and technology, iccst8; kuala lumpur (key engineering materials).  . 

dedikarni, andanastuti muchtar, norhamidi muhamad and
wan ramli wan daud.  (2011).  microstructure characterisation of ag2o3-bi2o3 composite cathodes for intermediate temperature solid oxide fuel cells (it-sofcs).  - 8th international conference on composite science and technology location: kuala lumpur, malaysia (key engineering materials).  . 

n. hassanuddin, m.j. ghazali, a. muchtar, m.c. isa and a.r. daud.  (2011).  effects of al2o3-13%tio2 coating particle size on commercial mild steel via plasma spray method.  - 8th international conference on composite science and technology, iccst8 (key engineering materials); kuala lumpur.  . 

andanastuti muchtar*, che nurul aini che amri & axel hunger.  (2011).  internationalising the student body: the ukm-ude experience in engineering.  - international congress on engineering education (iceed 2011), kuala lumpur, malaysia.  . 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad and andanastuti muchtar.  (2011).  simultaneous optimization for multiple responses on the compression moulding parameters of composite graphite - polypropylene using taguchi method.  - 8th international conference on composite science and technology, iccst8; kuala lumpur (key engineering materials).  . 

andanastuti muchtar, mohd najib redzuan lee,
khairul anwar mastor, shahrum abdullah, axel hunger.  (2011).  pattern of changes in personality traits and self-esteem among ukm-ude double degree students.  - 2011 ieee global engineering education conference (educon), amman, jordan.  . 

hamimah abd.rahman, a. muchtar, norhamidi muhamad
and huda abdullah.  (2011).  influence of processing parameters on electrophoretically deposited la0.6sr0.4co0.2fe0.8o3-delta films.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials).  . 

jamilah mustafa, junaenah sulehan, latiffah pawanteh, shahrum abdullah, hassan basri, andanastuti muchtar, khairul anwar mastor, zulkiple abdul ghani, hunger axel.  (2011).  internationalisation and its implications for intercultural maturity among academic staff : a case study.  - procedia social and behaviourial sciences.  . 

redzuan lee, m.n., muchtar, a., sulehan, j., mastor, k.a., hunger, a., abdullah, s..  (2011).  contribution to the understanding of cultural dynamics in co-operation between malaysia and germany.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka (procedia - social and behavioral sciences).  . 

mastor, k.a., sulehan, j., mustafa, j., pawanteh, l., basri, h., abdullah, s., mokthtar, a., (...), axel, h..  (2011).  personality traits orientation of university kebangsaan malaysia (ukm) and ukm - university duisburg-essen (ude) engineering students.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka (procedia - social and behavioral sciences).  . 

s. ahmad, n. muhamad, a. muchtar, j. sahari, k. r. jamaludin, m. h. i. ibrahim and n. h. mohamad nor.  (2011).  taguchi method for the determination of optimised sintering parameters of titanium alloy foams.  - proceedings of the advances in materials and processing technologies (ampt 2009), kuala lumpur (advanced materials research).  . 

muhammed ali, s.a., muchtar, a., muhamad, n., sulong, a.b..  (2011).  a review on preparation of sdc-carbonate as composite electrolyte material for intermediate temperature solid oxide fuel cells (it-sofc).  - 2011 ieee 1st conference on clean energy and technology, cet 2011; kuala lumpur.  . 

miloud souiyah, a. muchtar and a.k. ariffin.  (2011).  finite element analysis of indentation cracks for brittle materials under static loading.  - key engineering materials.  . 

andanastuti muchtar, mohd najib redzuan lee,
khairul anwar mastor, junaenah sulehan, shahrum
abdullah, monika jusdi, axel hunger.  (2010).  investigation on students? personality development of ukm-ude double degree programme.  - proceeding 2nd international congress on engineering education (iceed 2010), fakulti kejuruteraan dan alam bina ukm.  . 

andanastuti muchtar, noorashrina a. hamid,
norhamidi muhamad, wan ramli wan daud.  (2010).  sintering effects on lscf cathodes for intermediate temperature solid oxide fuel cells (it-sofcs).  - 2010 international conference on manufacturing engineering and automation, icmea2010; guangzhou (advanced materials research).  . 

n. h. yusoff, m. j. ghazali, m. c. isa, a. r. daud, a. muchtar, and s. forghani.  (2010).  characterisations of al2o3-13% wt tio2 deposition on mild steel via plasma spray method.  - american institute of physics.  . 

hamimah abd.rahman, andanastuti muchtar, norhamidi muhamad, huda abdullah.  (2010).  electrophoretic deposition of la0.6sr0.4co0.2fe0.8o3-? cathode film on stainless steel substrates.  - 2010 international conference on manufacturing engineering and automation, icmea2010; guangzhou(advanced materials research).  . 

jarot raharjo, andanastuti muchtar, wan ramli wan daud, norhamidi muhamad and edy heryanto majlan.  (2010).  fabrication of dense composite ceramic electrolyte sdc-(li/na)2co3.  - key engineering materials.  . 

huda abdullah, nor habibi saadah, sahbudin shaari, andanastuti muchtar.  (2010).  optical and structural properties of zns thin films grown by cbd technique.  - pembangunan pengesan foto.  . 

n. hassanuddin, m. j. ghazali, a. muchtar, m. c. isa & a. r. daud.  (2010).  effects of al2o3-13%tio2 coating particle size on commercial mild steel via plasma spray method.  - 8th international conference on fracture & strength of solids 2010.  . 

sufizar ahmad, norhamidi muhamad, andanastuti muchtar, jaafar sahari, k. r. jamaludin, m. h. i. ibrahim and n.h. mohamad nor.  (2010).  optimisation of processing parameters of titanium foams using taguchi method for compressive strength.  - key engineering materials (icope2010 and 13th icpe international conference on precision engineering).  .