afifah md ali, mohd zaidi omar, intan fadhlina mohamed, mohd shukor salleh, hanizam hashim, nur farah bazilah wakhi anuar.  (2024).  effect of heat treatment on the microstructures and mechanical properties of thixoformed graphene-reinforced aluminium alloy composite.  - international journal of metalcasting.  1695-1709. 

khaled salem alhawari, mohd zaidi omar, saziana samat, ahmad muhammad aziz.  (2024).  effect of magnesium addition consolidated by the thixoforming process on the wear properties of a319 alloy.  - the international journal of advanced manufacturing technology.  4327-4344. 

nur farah bazilah wakhi anuar, mohd zaidi omar, mohd shukor salleh, wan fathul hakim w. zamri, afifah md ali.  (2024).  effect of graphene addition on microstructure and wear behaviour of the a356-based composite fabricated by thixoforming process.  - journal of materials research and technology.  4813-4831. 

m. a. m. arif, m. z. omar, s. samat, z. sajuri.  (2023).  microstructural and mechanical properties of thixoformed al-si-cu-mg alloy: effect of partial remelting treatment.  - international journal of metalcasting.  3155-3166. 

nur farah bazilah wakhi anuar, mohd shukor salleh, mohd zaidi omar, wan fathul hakim w. zamri, afifah md ali, saziana samat.  (2023).  wear properties of graphene-reinforced aluminium metal matrix composite: a review.  - reviews on advanced materials science.  1-27. 

nur farah bazilah wakhi anuar, mohd zaidi omar, mohd shukor salleh, wan fathul hakim w. zamri, afifah md ali.  (2024).  effect of short heat treatments on the microstructural evolution and hardness of thixoformed graphene reinforced aluminium composites.  - sains malaysiana.  705-717. 

afifah md ali, mohd zaidi omar, hanizam hashim, mohd shukor salleh and intan fadhlina mohamed.  (2021).  recent development in graphene-reinforced aluminium matrix composite: a review.  - reviews on advanced materials science.  801-817. 

m.n. mohammed, m.z. omar, z. sajuri, and salah al-zubaidi.  (2020).  characterization of metallurgical and mechanical properties of thixowelded aisi d2 and aisi 304 steels.  - journal of materials engineering and performance.  739-749. 

m.a.m arif, m.z. omar & z. sajuri.  (2020).  kebolehbentukan-tikso aloi 2014 dengan penambahan si dan pengurangan cu.  - sains malaysiana.  179-188. 

saziana samat, mohd zaidi omar, intan fadhlina mohamed.  (2019).  high-frequency induction heating of al-si-cu-mg aluminium alloy in thixoforming.  - materials research.  1-13. 

nur farah bazilah wakhi anuar, mohd zaidi omar, mohd shukor salleh, wan fathul hakim w. zamri, afifah md ali.  (2024).  effect of short heat treatments on the microstructural evolution and hardness of thixoformed graphene reinforced aluminium composites.  - sains malaysiana.  705-717. 

nur farah bazilah wakhi anuar, mohd zaidi omar, mohd shukor salleh, wan fathul hakim w. zamri, afifah md ali.  (2024).  effect of graphene addition on microstructure and wear behaviour of the a356-based composite fabricated by thixoforming process.  - journal of materials research and technology.  4813-4831. 

khaled salem alhawari, mohd zaidi omar, saziana samat, ahmad muhammad aziz.  (2024).  effect of magnesium addition consolidated by the thixoforming process on the wear properties of a319 alloy.  - the international journal of advanced manufacturing technology.  4327-4344. 

afifah md ali, mohd zaidi omar, intan fadhlina mohamed, mohd shukor salleh, hanizam hashim, nur farah bazilah wakhi anuar.  (2024).  effect of heat treatment on the microstructures and mechanical properties of thixoformed graphene-reinforced aluminium alloy composite.  - international journal of metalcasting.  1695-1709. 

m. a. m. arif, m. z. omar, s. samat, z. sajuri.  (2023).  microstructural and mechanical properties of thixoformed al-si-cu-mg alloy: effect of partial remelting treatment.  - international journal of metalcasting.  3155-3166. 

m.a. gebril, m.z. omar, i.f. mohamed, n.k. othman and m.a.h. abdelgnei.  (2018).  corrosion improvement and microstructure evaluation of sem-solid a356 alloy by ecap process.  - iop conf. series: journal of physics: conference series.  . 

m.a. abdelgnei, m.z. omar and m.j. ghazali.  (2018).  wear properties of thixoformed ai-5.7si-2cu-o.3mg aluminium alloy.  - 15th international conference on semi-solid processing of alloys and composites.  . 

m.n , mohammed, m.z. omar, salah ai-zubaidi, k,s. alhawari, ma abdelgnei.  (2018).  weldability and joining characteristics of aisi d2/aisi 304 steels using semisolid diffusion joining.  - 15th international conference on semi-solid processing of alloys and composites.  . 

abdullah m.f., abdullah s., omar m.z., sajuri z., risby m.s..  (2015).  analysis of variable strain amplitude response caused by impact loading of carbon nanotube reinforced magnesium alloy az31b.  - procedia engineering.  10-17. 

m.n. mohammed, m. z. omar, j. syarif, z. sajuri, m. s. salleh, k. s. alhawari.  (2015).  semi-solid joining of d2 cold-work tool steel.  - solid state phenomena.  355-360. 

mohd zaidi omar, saziana samat, intan fadhlina mohamed.  (2022).  pemprosesan logam separa pepejal: pendekatan industri automotif.  - .  183. 

fariza md sham, ishak yussof, zaidi omar, wan zawiah wan zin @ wan ibrahim.  (2018).  bidang keberhasilan strategik ukm (pelan strategik ukm 2014-2025).  - .  67. 

m.s. salleh, m.z. omar, j. syarif.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - .  24. 

mariyam jemeelah ghazali, mohd zaidi omar, che husna azhari, kamarul afizi kosman & shahril mohamad.  (2016).  teknologi di alam melayu.  - .  9. 

yuzainee md yusoff, azami zaharim, mohd zaidi omar & abdul wahab mohammad.  (2014).  kemahiran kebolehgajian graduan kejuruteraan.  - .  Bab 5 : 85-100. 

m.s. salleh, m.z. omar, j. syarif.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - .  24. 

c.h. azhari, m.z. omar, s. abdullah.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - .  4. 

mariyam jemeelah ghazali, mohd zaidi omar, che husna azhari, kamarul afizi kosman & shahril mohamad.  (2016).  teknologi di alam melayu.  - .  9. 

nuraini khatimin, yuzainee md yusoff, mohd zaidi omar & azami zaharim.  (2014).  kemahiran kebolehgajian graduan kejuruteraan.  - .  Bab 3 : 46-68. 

yuzainee md yusoff, mohd zaidi omar, azami zaharim & abdul wahab mohammad.  (2014).  kemahiran kebolehgajian graduan kejuruteraan.  - .  Bab 4 : 69-84. 

mohd zaidi omar, saziana samat, intan fadhlina mohamed.  (2022).  pemprosesan logam separa pepejal: pendekatan industri automotif.  - .  183. 

ishak yussof, mohd. zaidi omar, fariza md. sham, wan zawiah wan zin.  (2019).  pelan stategik ukm 2019-2021.  - .  49. 

che husna azhari, mohd zaidi omar, shahrum abdullah.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - .  146. 

fariza md sham, ishak yussof, zaidi omar, wan zawiah wan zin @ wan ibrahim.  (2018).  bidang keberhasilan strategik ukm (pelan strategik ukm 2014-2025).  - .  67. 

mohd zaidi omar, azami zaharim, abdul wahab mohammad.  (2014).  kemahiran kebolehgajian graduan kejuruteraan.  - .  131. 

abu bakar bin sulong;norhamidi bin muhamad;mohd. zaidi bin omar;zainuddin bin sajuri;nabilah afiqah binti mohd radzuan;mohd ikram bin ramli.  (2023).  mechanism in processability of copper-aluminium-manganese shape memory alloys (smas) through powder injection moulding (pim).  - .  . 

nur syahirah zainuddin, wan fathul hakim w. zamri, mohd zaidi omar, muhamad faiz bin md din.  (2023).  a brief review on failure of steam turbine blades and preventative measures.  - the 7th symposium on damage mechanics of materials and structures (sdmms2023).  1-22. 

mohd. zaidi bin omar;abu bakar bin sulong;zainuddin bin sajuri;intan fadhlina binti mohamed.  (2023).  mechanical properties and microstructural evolution of thixoformed graphene nanosheets reinforced aluminium alloy matrix composites.  - .  . 

mohd. zaidi bin omar;zainuddin bin sajuri;intan fadhlina binti mohamed.  (2022).  effect of equal channel angular pressing on microstructural development and tensile properties of er-modified al-15%mg2si metal matrix composite.  - .  . 

intan fadhlina binti mohamed;mohd. zaidi bin omar;shahrum bin abdullah;zainuddin bin sajuri;wan fathul hakim bin w. zamri;nashrah hani binti jamadon.  (2022).  giant straining of highly commercial aluminum alloys via high-pressure torsion process for vehicle applications.  - .  .