Biografi/ Biography :
Abu Bakar Sulong is Professor at the Dept. of Mechanical and Manufacturing Engineering, UKM. He graduated with a BEng (Hons) in Mechanical and System Engineering from Gifu University Japan, 2001. He then worked as an trainee engineer in SMK Corporation in Ibaraki, Japan for a year followed by as a design engineer in Malaysia for two years. He joined UKM as a tutor in January, 2004. He then continued his studies in March, 2004. In 2008, he received his PhD from Sejong University, South Korea under Advanced Material Processing Lab, Mechanical and Aerospace Engineering Department. He teaches for undergraduate and post graduate of Mechanical Engineering Programme. He served as Editor-in-Chief for Jurnal Kejuruteraan (Journal of Engineering) an indexed ESCI (WoS). Currently, he is deputy director at Center of Research and Instrumentation Management (CRIM). His specializations are in the area of Composite Material Processing and Powder Metallurgy. Currently, he is an active researcher for four research groups in UKM. He has experienced as project and programme leader for grants worth more than RM4.0 million. Based on Scopus data on June 2020, he has 230 published documents, 2626 citations, 30 h-index with nearly 100 manuscripts in Q1 and Q2 journals. He been invited as keynotes, invited talks and speakers at various international and national conferences. He is also a Professional Engineer with Practice under Board Engineer Malaysia (BEM). He also serves as engineering programmes accessor, panel for grants evaluation and committee of professional organizations.
nabilah afiqah mohd radzuan, farhana mohd foudzi, abu bakar sulong, m. s. h. al-furjan, nishata royan rajendran royan. (2024). quick insight into the dynamic dimensions of 4d printing in polymeric composite mechanics. - reviews on advanced materials science. 1-12.
nur aisyah miza ahmad tamizia, abu bakar sulong, norhamidi muhamad, mohd ikram ramli. (2024). viscosity analysis of copper aluminium manganese (cualmn) shape memory alloy mixed with polyethylene glycol peg polymethyl methacrylate acrylic (pmma) and stearic acid (sa) based binder. - jurnal kejuruteraan. 761-768.
kambiz rashidi, abu bakar sulong, norhamidi muhamad, abdolali fayyaz, farhana mohd foudzi, al basir. (2024). martensitic transformation characteristics, mechanical properties and damping behavior of cualni shape memory alloys: a review of their modifications and improvements. - journal of materials research and technology. 2732-2749.
nabilah afiqah binti mohd radzuan;norhamidi bin muhamad;abu bakar bin sulong;zaliha binti wahid;farhana binti mohd foudzi. (2024). mechanism of anticipating diffusion and delamination on fibre oriented additive manufactured polyamide/carbon fibre composite filament. - . .
norhamidi bin muhamad;che hassan bin che haron;abu bakar bin sulong;nashrah hani binti jamadon;farhana binti mohd foudzi;nabilah afiqah binti mohd radzuan. (2024). investigation of sintering mechanism of yttria-stabilized zirconia and hydroxyapatite bi-material micro-components produced by two-component micro-powder injection moulding. - . .
kambiz rashidi, abu bakar sulong, norhamidi muhamad, abdolali fayyaz, farhana mohd foudzi, al basir. (2024). martensitic transformation characteristics, mechanical properties and damping behavior of cualni shape memory alloys: a review of their modifications and improvements. - journal of materials research and technology. 2732-2749.
nabilah afiqah mohd radzuan, farhana mohd foudzi, abu bakar sulong, m. s. h. al-furjan, nishata royan rajendran royan. (2024). quick insight into the dynamic dimensions of 4d printing in polymeric composite mechanics. - reviews on advanced materials science. 1-12.
al basir, norhamidi muhamad, abu bakar sulong, nashrah hani jamadon, farhana mohd foudzi. (2023). recent advances in processing of titanium and titanium alloys through metal injection molding for biomedical applications: 2013-2022. - materials. 1-33.
fathin iliana jamhari. farhana mohd foudzi, minhalina ahmad buhairi, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, nashrah hani jamadon, kim seah tan. (2023). influence of heat treatment parameters on microstructure and mechanical performance of titanium alloy in lpbf: a brief review. - journal of materials research & technology. 4091-4110.
nabilah afiqah mohd radzuan, nisa naima khalid, farhana mohd foudzi, nishata royan rajendran royan and abu bakar sulong. (2023). mechanical analysis of 3d printed polyamide composites under different filler loadings. - polymers. 1-11.
nurul nadiah mahmud, abu bakar sulong, kei ameyama. (2023). powder injection moulded ti6al4v-ha composite for implants. - sains malaysiana. 1557-1565.
md ahsanul haque, md mahbubur rahman, faridul islam, abu bakar sulong, loh kee shyuan, ros emilia rosli , ashok kumar chakraborty, julfikar haider. (2023). kinetics of oxygen reduction reaction of polymer-coated mwcnt-supported pt-based electrocatalysts for high-temperature pem fuel cell. - energies. 1-18.
nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi. (2022). prestasi bahan polimer komposit dicetak menggunakan pemodelan pemendapan bersatu: suatu ulasan ringkas. - sains malaysiana. 1545-1556.
wei lin ng, lei zhou, abu bakar sulong, eng-poh ng & soon huat tan. (2022). modification of the commercial polyester filter media support with electrospun polyethylene terephthalate fibers and its application for air purification. - science and technology for the built environment. 928-943.
nabilah afiqah mohd radzuan, abu bakar sulong, iswandi. (2021). effect of multi-sized graphite filler on the mechanical properties and electrical conductivity. - sains malaysiana. 2025-2034.
kambiz rashidi, abu bakar sulong, norhamidi muhamad, abdolali fayyaz, farhana mohd foudzi, al basir. (2024). martensitic transformation characteristics, mechanical properties and damping behavior of cualni shape memory alloys: a review of their modifications and improvements. - journal of materials research and technology. 2732-2749.
nabilah afiqah mohd radzuan, farhana mohd foudzi, abu bakar sulong, m. s. h. al-furjan, nishata royan rajendran royan. (2024). quick insight into the dynamic dimensions of 4d printing in polymeric composite mechanics. - reviews on advanced materials science. 1-12.
mohd rhafiq mazlan, nashrah hani jamadon, armin rajabi, abu bakar sulong, intan fadhlina mohamed, farazila yusof, nur ayuni jamal. (2023). necking mechanism under various sintering process parameters - a review. - journal of materials research and technology - jmr&t. 2189-2201.
md ahsanul haque, md mahbubur rahman, faridul islam, abu bakar sulong, loh kee shyuan, ros emilia rosli , ashok kumar chakraborty, julfikar haider. (2023). kinetics of oxygen reduction reaction of polymer-coated mwcnt-supported pt-based electrocatalysts for high-temperature pem fuel cell. - energies. 1-18.
al basir, norhamidi muhamad, abu bakar sulong, muhammad bin mohamed amin, nashrah hani jamadon, nabilah afiqah mohd radzuan. (2023). micro-injection molding and debinding behavior of hydroxyapatite/zirconia bi-materials fabricated by two-component micro powder injection molding process. - materials. 1-18.
aditya reza haswendra, amir arifin, abu bakar sulong, norhamidi mohamad, gunawan and barlin. (2022). human-centered technology for a better tomorrow. - human engineering symposium, humens 2021 (lecture notes in mechanical engineering). 289-297.
nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong and farhana mohd foudzi. (2021). a review on bonding of polyamide reinforced carbon fibre via additive manufacturing. - iop conf. series: materials science and engineering. 1-6.
nabilah afiqah mohd radzuan, mohammad afiq rashid, dulina tholibon, abu bakar sulong and che hassan che haron. (2021). kenaf reinforced polypropylene composites: a numerical simulation. - aip conference proceedings / 4th international sciences, technology & engineering conference (istec) 2020. 1-9.
farhana mohd foudzi, minhalina ahmad buhairi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, wan sharuzi wan harun, mohannad saleh hammadi al-furjan. (2021). effect of energy density on properties of additive manufactured ti6al4v via slm. - international conference on powder metallurgy and particulate materials (powdermet2021). 434-448.
mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, seong jin park. (2019). processing of stainless steel (ss316l)-hydroxyapatite (ha) powder composite through powder injection molding. - iop conference series: journal of physics: conference series. 1-6.
abu bakar sulong, angela ng min hwei ng, muhammad azmi abdul hamid. (2021). metal-ceramic composite: a new generation material for medical implant. - . 135.
nabilah afiqah mohd. radzuan, abu bakar sulong, mohd. yusuf zakaria. (2021). komposit polimer pengalir revolusi teknologi pembuatan. - . 218.
farhana mohd foudzi, norhamidi muhamad, abu bakar sulong. (2021). seramik nano: revolusi produk mikro. - . 173.
nor kamaliana khamis, mohd faizal mat tahir, abu bakar sulong, zulkhairi zainal abidin, intan fadhlina mohamad. (2020). teori dan inovasi pengajaran dan pembelajaran: menyusuri pandemik covid-19. - . 10.
majid niaz akhtar, abu bakar sulong, muhammad shahid nazir, khaliq majeed, mohd. khairul fadzly radzi, nur farhani ismail & muhammad rafi raza. (2017). green biocomposites manufacturing and properties. - . 409.
nor kamaliana khamis, mohd faizal mat tahir, abu bakar sulong, zulkhairi zainal abidin, intan fadhlina mohamad. (2020). teori dan inovasi pengajaran dan pembelajaran: menyusuri pandemik covid-19. - . 10.
a.b. sulong, m.n. akhtar, s. ab. karim & c.h. azhari. (2017). advances in materials processing and integrity non-metals and hybrids. - . 14.
che husna azhari, abu bakar sulong & rozli zulkifli. (2017). advances in materials processing and integrity non-metals and hybrids. - . 7.
majid niaz akhtar, abu bakar sulong, muhammad shahid nazir, khaliq majeed, mohd. khairul fadzly radzi, nur farhani ismail & muhammad rafi raza. (2017). green biocomposites manufacturing and properties. - . 409.
abu bakar sulong, angela ng min hwei ng, muhammad azmi abdul hamid. (2021). metal-ceramic composite: a new generation material for medical implant. - . 135.
farhana mohd foudzi, norhamidi muhamad, abu bakar sulong. (2021). seramik nano: revolusi produk mikro. - . 173.
nabilah afiqah mohd. radzuan, abu bakar sulong, mohd. yusuf zakaria. (2021). komposit polimer pengalir revolusi teknologi pembuatan. - . 218.
che husna azhari, abu bakar sulong & rozli zulkifli. (2017). advances in material processing & integrity - non metals and hybrids. - . 215.
che husna azhari, abu bakar sulong & rozli zulkifli. (2017). advances in materials : processing and integrity non metals and hybrids. - . 215.
nabilah afiqah binti mohd radzuan;norhamidi bin muhamad;abu bakar bin sulong;zaliha binti wahid;farhana binti mohd foudzi. (2024). mechanism of anticipating diffusion and delamination on fibre oriented additive manufactured polyamide/carbon fibre composite filament. - . .
norhamidi bin muhamad;che hassan bin che haron;abu bakar bin sulong;nashrah hani binti jamadon;farhana binti mohd foudzi;nabilah afiqah binti mohd radzuan. (2024). investigation of sintering mechanism of yttria-stabilized zirconia and hydroxyapatite bi-material micro-components produced by two-component micro-powder injection moulding. - . .
prof. ir. dr. abu bakar sulong, rohazaini hasan, prof. dr. mohd talib latif, prof. madya dr. hamidun bunawan, prof. madya dr. azlan abas, dr. ahmad aldrie amir, dr. mohamad taha ijab, dr. umi azmah hasran, mohammad shafiq bin rahmat, mohd syukri ismail. (2023). impak: kluster penyelidikan sumber lestari, alam sekitar dan kehidupan pintar. - impak: kluster penyelidikan sumber lestari, alam sekitar dan kehidupan pintar. 1-52.
abu bakar bin sulong;muhammad azmi bin abdul hamid;ng min hwei;farah `atiqah binti abdul azam. (2023). a new generation of titanium/hydroxyapatite/wollastonite biocomposite material for orthopaedic implant. - . .
nabilah afiqah binti mohd radzuan;norhamidi bin muhamad;abu bakar bin sulong;farhana binti mohd foudzi. (2023). bonding of polyamide reinforced carbon fibre via additive manufacturing. - . .
| Geran / Grant | Kolaborator / Collaborator | Status |
|---|---|---|
| NANO-MECHANICAL CHARACTERIZATION OF BI-MATERIAL STEEL-ZIRCONIA MICRO-COMPONENTS PRODUCED BY MICRO CO-POWDER INJECTION MOLDING | adelaide microscopy | 56.4% (2023-10-01 sehingga 2025-09-30) |
| NANO-MECHANICAL CHARACTERIZATION OF BI-MATERIAL STEEL-ZIRCONIA MICRO-COMPONENTS PRODUCED BY MICRO CO-POWDER INJECTION MOLDING | pebblereka | 56.4% (2023-10-01 sehingga 2025-09-30) |
| REDUCED GRAPHENE OXIDE/POLYANILINE POLYMER MATRIX WITH ENHANCED ELECTRICAL CONDUCTIVITY | yakin splendour global holding berhad | 56.4% (2023-10-01 sehingga 2025-09-30) |
| AB5-TYPE HYDROGEN STORAGE ALLOYS FOR HIGH-SELECTIVITY HYDROGEN RECOVERY FROM PYROLYSIS OFF-GAS | agensi nuklear malaysia (nuklear malaysia) | 2.1% (2024-11-01 sehingga 2026-10-31) |
| DEVELOPMENT OF SELECTIVE LASER MELTING (SLM) PARAMETERS FOR ENHANCED SHAPE MEMORY BEHAVIOR OF 4D PRINTED NICKEL TITANIUM (NITI) ALLOYS | ors technologies sdn bhd | 2.1% (2024-11-01 sehingga 2026-10-31) |