prof. dr. andanastuti binti muchtar

profesor kehormat

jabatan kejuruteraan mekanikal & pembuatan

 muchtar@ukm.edu.my



   Biografi/ Biography :

  • Dr. Andanastuti Muchtar is a Professor of Advanced Ceramics at the Department of Mechanical and Manufacturing Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia (UKM). She obtained her B.Eng. (Hons) Mech. Eng. from the University of Leeds, UK in 1992 and joined UKM immediately after. She then pursued her PhD at the National University of Singapore and graduated in 1999, upon which she returned to UKM and built her academic career. She was promoted to Associate Professorship in 2003 and full professorship in 2010. From October 2007 to September 2008, she spent one year on an academic exchange to the University of Duisburg-Essen (UDE) funded by the German Academic Exchange Services (DAAD). Subsequently, she was appointed as Head of the UKM International Office at UDE in Duisburg, Germany from 2010 to 2013. She was later appointed as the Director of the UKM Graduate Centre from 2013 until 2019. She is currently active in research and heads the Solid Oxide Fuel Cell Research Group at UKM and is an associate research fellow at the Fuel Cell Institute, UKM. Her current research interests also include bio ceramics and dental ceramics as she collaborates with her counterparts from the Faculty of Dentistry, UKM.

  • nur nadhihah mohd tahir, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar, abdullah abd samat, lai jian wei.  (2024).  comparative analysis of lico0.6sr0.4o2 cathode electrochemical performance in oxide- and proton-conducting intermediate-temperature solid fuel oxide cells.  - journal of advanced research in micro and nano engineering.  22-30. 

     

    muhammed ali shaikh abdul kader abdul hameed;andanastuti binti muchtar;mahendra rao a/l somalu;nurul akidah binti baharuddin.  (2024).  highly stable la0.6sr0.4co0.2fe0.8o3-δ−sn0.1ce0.9o2−δ composite cathode for electrochemical reduction of carbon dioxide in solid oxide electrolysis cell.  -

     

    teng ws, yew hz, jamadon nh, qamaruz zaman j, meor ahmad mi, muchtar a.  (2024).  unravelling the role of residual stress distribution in the performance of bilayered zirconia restorations - a narrative review.  - journal of health and translational medicine (jummec).  178-186. 

     

    wen sheng teng, hsu zenn yew, nashrah hani jamadon, jasmina qamaruz zaman, meor iqram meor ahmad, andanastuti muchtar.  (2024).  effect of porcelain veneering technique in bilayered zirconia on bond strength and residual stress distribution.  - journal of the mechanical behavior of biomedical materials.  1-10. 

     

    dyg siti nurzailyn abg shamsuddin, ahmad faris mohd fekeri, andanastuti muchtar, faisal khan, bee chin khor, bee huah lim, masli irwan rosli, mohd sobri takriff.  (2023).  computational fluid dynamics modelling approaches of gas explosion in the chemical process industry: a review.  - process safety and environmental protection.  112-138. 

     

    wen sheng teng, hsu zenn yew, nashrah hani jamadon, jasmina qamaruz zaman, meor iqram meor ahmad, andanastuti muchtar.  (2024).  effect of porcelain veneering technique in bilayered zirconia on bond strength and residual stress distribution.  - journal of the mechanical behavior of biomedical materials.  1-10. 

     

    constance l. gnanasagaran, karthikeyan ramachandran, nashrah hani jamadon, vishaal harikrishna kumar, andanastuti muchtar, ashwath pazhani, beenish ayaz.  (2023).  microstructural and mechanical behaviours of y-tzp prepared via slip-casting and fused deposition modelling (fdm).  - heliyon.  1-10. 

     

    isyraf aznam, andanastuti muchtar, mahendra r. somalu, nurul akidah baharuddin, nur adiera hanna rosli.  (2023).  advanced materials for heterogeneous catalysis: a comprehensive review of spinel materials for direct internal reforming of methane in solid oxide fuel cell.  - chemical engineering journal.  1-19. 

     

    naziratul adirah nasarudin, masfueh razali, victor goh, wen lin chai, andanastuti muchtar.  (2023).  expression of interleukin-1b and histological changes of the three-dimensional oral mucosal model in response to yttria-stabilized nanozirconia.  - materials.  1-12. 

     

    ainaa nadhirah zainon, mahendra rao somalu, audi majdan kamarul bahrain, andanastuti muchtar, nurul akidah baharuddin, muhammed ali s.a, abdullah abdul samat, nafisah osman, abul kalam azad.  (2023).  influence of sintering temperature on the properties of the screen-printed anode of the lsmo4 ruddlesden-popper perovskite for intermediate-temperature solid oxide fuel cells.  - international journal of hydrogen energy.  38425-38437. 

     

    azreen junaida abd aziz, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar, sahrim haji ahmad.  (2023).  kesan suhu pensinteran terhadap mikrostruktur dan sifat mekanikal perovskit seramik srfe0.9ti0.1o3-d-sdc.  - sains malaysiana.  1303-1314. 

     

    joelle c. w. mah, isyraf aznam, andanastuti muchtar, mahendra rao somalu, jarot raharjo.  (2023).  synthesis of (cu,mn,co)3o4 spinel: effects of citrate-to-nitrate ratio on its homogeneity and electrical properties.  - energies.  1-11. 

     

    ahmad fuzamy mohd abd fatah, ahmad zaki rosli, ahmad azmin mohamad, andanastuti muchtar, muhammed ali s.a., noorashrina a. hamid.  (2022).  electrochemical evaluation of nickel oxide addition toward lanthanum strontium cobalt ferrite cathode for intermediate temperature solid oxide fuel cell (it-sofcs).  - energies.  1-15. 

     

    ahmad fuzamy mohd abd fatah, ahmad zaki rosli, ahmad azmin mohamad, andanastuti muchtar, muhammed ali s.a., noorashrina a. hamid.  (2022).  electrochemical evaluation of nickel oxide addition toward lanthanum strontium cobalt ferrite cathode for intermediate temperature solid oxide fuel cell itsofcs.  - energies.  1-15. 

     

    sharmini arumugam, hsu zenn yew, safura anita baharin, jasmina qamaruz zaman, andanastuti muchtar, shalini kanagasingam.  (2021).  micro-computed tomography evaluation of dentinal microcracks following canal preparation with thermomechanically heat-treated engine-driven file.  - australian endodontic journal.  520-530. 

     

    nur nadhihah mohd tahir, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar, abdullah abd samat, lai jian wei.  (2024).  comparative analysis of lico0.6sr0.4o2 cathode electrochemical performance in oxide- and proton-conducting intermediate-temperature solid fuel oxide cells.  - journal of advanced research in micro and nano engineering.  22-30. 

     

    teng ws, yew hz, jamadon nh, qamaruz zaman j, meor ahmad mi, muchtar a.  (2024).  unravelling the role of residual stress distribution in the performance of bilayered zirconia restorations - a narrative review.  - journal of health and translational medicine (jummec).  178-186. 

     

    wen sheng teng, hsu zenn yew, nashrah hani jamadon, jasmina qamaruz zaman, meor iqram meor ahmad, andanastuti muchtar.  (2024).  effect of porcelain veneering technique in bilayered zirconia on bond strength and residual stress distribution.  - journal of the mechanical behavior of biomedical materials.  1-10. 

     

    ahmad fuzamy mohd abdul fatah, ahmad azmin mohamad, muhammed ali s.a., andanastuti muchtar, nor anisa arifin, wan nor anasuhah wan yusoff, noorashrina a. hamid.  (2023).  influence of zno on electrochemical and physiochemical properties of lanthanum strontium cobalt ferrite as cathode for intermediate temperature solid oxide fuel cells.  - international journal of technology.  1123-1133. 

     

    isyraf aznam, andanastuti muchtar, mahendra r. somalu, nurul akidah baharuddin, nur adiera hanna rosli.  (2023).  advanced materials for heterogeneous catalysis: a comprehensive review of spinel materials for direct internal reforming of methane in solid oxide fuel cell.  - chemical engineering journal.  1-19. 

     

    n shieela kalib, a muchtar, v zhen yuan, m rao somalu and a kamal ariffin mohd ihsan.  (2022).  thermal investigation of solid oxide fuel cell ni-ysz anode supported with cooling system: a fem approach.  - iop conference series: materials science and engineering.  1-6. 

     

    wan nor anasuhah wan yusoff, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar.  (2022).  synthesis and preliminary study of the multilayer lico0.6ni0.4o2 as solid oxide fuel cell cathode.  - 4th international symposium on advanced materials and nanotechnology (isamn 2020).  1-7. 

     

    r ravi, n shieela kalib, a muchtar and m rao somalu.  (2022).  potential of integrating solid oxide fuel cell based on biomass in power generation in malaysia: a feasibility study.  - iop conference series: materials science and engineering.  1-6. 

     

    b kiwan, n s kalib and a muchtar.  (2022).  decomposition and decoupling analyses of co2 emissions and economic growth: a comparative study between malaysia and vietnam.  - iop conference series: materials science and engineering.  1-6. 

     

    s a muhammed ali, andanastuti muchtar, j c w mah, jarot raharjo, deni shidqi khaerudini.  (2021).  effect of open pore and pore interconnectivity in the ni-sdc cermet anode microstructure on the performance of solid oxide fuel cells.  - 32nd symposium of malaysian chemical engineers (somche2021).  1-8. 

     

    mahendra rao somalu, abdul azim jais, andanastuti muchtar.  (2023).  sel fuel oksida pepejal: prestasi janaan tenaga.  - 175. 

     

    nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar.  (2022).  seramik perovskit peranti penghasil tenaga masa depan.  - 177. 

     

    wan nor anasuhah wan yusoff, mahendra rao somalu, andanastuti muchtar.  (2022).  bahan litium: komponen utama penjana tenaga lestari.  - 136. 

     

    nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar, che h. azhari.  (2021).  advanced aspects of engineering research vol. 2.  - 20. 

     

    muhamad isyraf bin aznam, andanastuti binti muchtar, mahendra rao a/l somalu.  (2021).  penyalutan elektroforesis: teknik peningkatan prestasi tinggi sel bahan api.  - 147. 

     

    noraiham mohamad, jeefferie abd razak, hairul effendy ab maulod, andanastuti muchtar, mariyam jameelah ghazali, dahlan hj. mohd, che husna azhari.  (2022).  mineral-filled polymer composites.  - 36. 

     

    nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar, che h. azhari.  (2021).  advanced aspects of engineering research vol. 2.  - 20. 

     

    nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar and che h. azhari.  (2021).  highlights on medicine and medical science vol. 18.  - 21. 

     

    muhammed ali s.a, andanastuti muchtar, mahendra rao somalu.  (2017).  advances in materials processing and integrity non-metals and hybrids.  - 20. 

     

    noor faeizah amat, andanastuti muchtar, norziha yahaya, mariyam jameelah ghazali.  (2017).  advances in materials processing and integrity non-metals and hybrids.  - 23. 

     

    mahendra rao somalu, abdul azim jais, andanastuti muchtar.  (2023).  sel fuel oksida pepejal: prestasi janaan tenaga.  - 175. 

     

    wan nor anasuhah wan yusoff, mahendra rao somalu, andanastuti muchtar.  (2022).  bahan litium: komponen utama penjana tenaga lestari.  - 136. 

     

    nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar.  (2022).  seramik perovskit peranti penghasil tenaga masa depan.  - 177. 

     

    muhamad isyraf bin aznam, andanastuti binti muchtar, mahendra rao a/l somalu.  (2021).  penyalutan elektroforesis: teknik peningkatan prestasi tinggi sel bahan api.  - 147. 

     

    sarani zakaria, andanastuti muchtar, aisyah abdul rahman, wan hanna melini wan mohtar, babul airianah othman, norazlin hassim, abdul munir abd. murad,.  (2021).  peraturan-peraturan universiti kebangsaan malaysia (pengajian siswazah) 2021.  - 57. 

     

    muhammed ali shaikh abdul kader abdul hameed;andanastuti binti muchtar;mahendra rao a/l somalu;nurul akidah binti baharuddin.  (2024).  highly stable la0.6sr0.4co0.2fe0.8o3-δ−sn0.1ce0.9o2−δ composite cathode for electrochemical reduction of carbon dioxide in solid oxide electrolysis cell.  -

     

    teng wen sheng, yew hsu zenn, nashrah hani jamadon, jasmina qamaruzzaman, meor iqram meor ahmad, andanastuti muchtar.  (2023).  comparative analysis of porcelain veneering techniques in bilayered zirconia restorations: a study on bond strength and residual stress distribution.  - the 1st new dental research exhibition and meeting.  35. 

     

    nur hanisah hadi, mahendra rao somalu, abdullah abdul samat, wan nor anasuhah wan yusoff, andanastuti muchtar, nurul akidah baharuddin, muhammed ali s.a., jarot raharjo, deni shidqi khaerudini, abdalla m. abdalla and abul kalam azad.  (2023).  exploring the influence of sintering temperature on the characteristics of ni-bczy composite anode for application of protonic ceramic fuel cells.  - the 8th international conference on fuel cell & hydrogen technology in collaboration with the 3rd symposium on fuel cell and hydrogen technology (icfcht-sfcht 2023).  82. 

     

    ahmad faiq omar, nur wardah norman, mahendra rao somalu, andanastuti muchtar, nurul akidah baharuddin, s.a. muhammed ali, nigel p. brandon.  (2023).  effect of copper oxide on the performance of ni-cu-based anode in solid oxide fuel cells operated on biogas fuel.  - the 8th international conference on fuel cell & hydrogen technology in collaboration with the 3rd symposium on fuel cell and hydrogen technology (icfcht-sfcht 2023).  39. 

     

    nur wardah norman, ahmad faiq omar, mahendra rao somalu, andanastuti muchtar, nurul akidah baharuddin, muhammed ali s.a., abul kalam azad.  (2023).  prelusive study on phase formation and chemical stability of sr1- xbaxce0.7y0.2zr0.1o3-ä (x = 0-1) as proton-conducting solid oxide fuel cell electrolyte.  - the 8th international conference on fuel cell & hydrogen technology in collaboration with the 3rd symposium on fuel cell and hydrogen technology (icfcht-sfcht 2023).  30.